Looking for 1 1/4inch front swaybar - The 1947 - Present Chevrolet & GMC Truck Message Board Network

toddtheodd · 08-02-2004, 06:40 PM

I'm looking for a 1 1/4 inch front swaybar for my 72 c/10. Preferably in the DFW area.

stelth2002 · 08-02-2004, 06:56 PM

Good luck finding the 1.25 inch sway bar.... ive found 3 1.125 bars in the last year around here.

beaterC10 · 08-02-2004, 07:09 PM

You might try looking for 3/4 t big block Suburbans in the junk yard. Thats where I found mine. A guy near me was parting one earlier this summer that had the large sway bar, but he had it towed off a few weeks back.

dmec · 08-02-2004, 07:46 PM

how much are those things going for?

toddtheodd · 08-02-2004, 07:06 PM

Well I know from Tx Firefighter that I can use the swaybars between 67 and 87 so that should help me out a little. (In fact maybe I should post this on the 73-87 parts section)
Todd

Tx Firefighter · 08-02-2004, 07:54 PM

Mine came off a 3/4 ton truck. It's the one that I did the Swaybar FAQ thread with.

68 Suburban · 08-02-2004, 08:00 PM

I purchased mine for $50.

toddtheodd · 08-02-2004, 08:06 PM

I can see that those two are a little different in the way the bars end. How does that affect installation.

68 Suburban · 08-02-2004, 08:08 PM

The black one is aftermarket, but was made for our trucks. Installation was a breeze.

68 chevy truck-TPI · 08-02-2004, 09:04 PM

try early classics enterprises. that's were i got my brand new one for my 68 chevy.

JJR · 08-03-2004, 08:03 AM

Currently, I have three 1 1/4" bars. I got all of them off 73-87 3/4 and 1 ton trucks. I was not planning on selling one but after buying back to school supplies for my four kids, I could use all the extra funds I can get. I would be willing to sell one for $45 (bar only). Shipping to Ft Worth would be under $20. I also have a set of Energy Suspension sway bar bushings (black with caps) that I would include for an extra $25. Let me know if you are interested.

chassispro · 08-03-2004, 08:22 AM

JJR, I sent you a PM.

stelth2002 · 08-03-2004, 11:34 AM

PM also sent

toddtheodd · 08-03-2004, 12:07 PM

Nice of everybody to let the person who originally made the post say if he wanted it or not before trying to get it for themselves.
JJR, I appreciate the offer. PM sent.
Todd

JJR · 08-03-2004, 12:25 PM

Looks like one of the bars and the bushings are going to toddtheodd. If the sale falls through I will re-post. I am willing to sale one more sway bar (bar only) for $45. I need to keep one for my brother-in-laws truck. I currently have a interest in the bar and was asked by another to post a pic. This is a pick of a bar I sold on E-Bay last year. I don't have a good set of mounting brackets anymore. The bars I am selling will be cleaned and painted black with rustoleum spray paint.

stelth2002 · 08-03-2004, 12:26 PM

I'll opt out for toddtheodd. Anyone else have one?

JJR · 08-05-2004, 07:47 AM

Todd, as requested, here is a pic of the bar and bushings.

toddtheodd · 08-05-2004, 08:23 AM

Thank you sir. Looks great. Can't wait to hit a turn after installing it

08-02-2004, 06:40 PM	#1
toddtheodd The oddest Todd around Join Date: May 2004 Location: Miami, Florida Posts: 1,418	Looking for 1 1/4inch front swaybar I'm looking for a 1 1/4 inch front swaybar for my 72 c/10. Preferably in the DFW area.

08-02-2004, 06:56 PM	#2
stelth2002 Young Gun wth Fast Inline Join Date: Jan 2002 Location: Idaho Posts: 1,475	Good luck finding the 1.25 inch sway bar.... ive found 3 1.125 bars in the last year around here. __________________ 1967 Chevrolet LWB with built 292! 415 ft. lbs of torque, 4 speed :O with 27% overdrive too, 3.73 Posi. Frame and body done... getting painted!!!

08-02-2004, 07:54 PM	#6
Tx Firefighter Watch out for your cornhole ! Join Date: Jun 2003 Location: Azle, Texas Posts: 14,162	Mine came off a 3/4 ton truck. It's the one that I did the Swaybar FAQ thread with. __________________ I'm on the Instagram- @Gearhead_Kevin

08-02-2004, 08:00 PM	#7
68 Suburban Registered User Join Date: Oct 2000 Location: From Chicago, Live in Phoenix, AZ Posts: 6,802	I purchased mine for $50. __________________ Just sitting here contemplating contemplation.

08-02-2004, 08:08 PM	#9
68 Suburban Registered User Join Date: Oct 2000 Location: From Chicago, Live in Phoenix, AZ Posts: 6,802	The black one is aftermarket, but was made for our trucks. Installation was a breeze. __________________ Just sitting here contemplating contemplation.

08-02-2004, 07:09 PM	#3
beaterC10 Senior Member Join Date: Jul 2003 Location: Indianapolis, IN Posts: 1,277	You might try looking for 3/4 t big block Suburbans in the junk yard. Thats where I found mine. A guy near me was parting one earlier this summer that had the large sway bar, but he had it towed off a few weeks back.

08-02-2004, 07:46 PM	#4
dmec Senior Member Join Date: Jun 2000 Location: yucaipa ca Posts: 580	how much are those things going for?

08-02-2004, 07:06 PM	#5
toddtheodd The oddest Todd around Join Date: May 2004 Location: Miami, Florida Posts: 1,418	Well I know from Tx Firefighter that I can use the swaybars between 67 and 87 so that should help me out a little. (In fact maybe I should post this on the 73-87 parts section) Todd

08-02-2004, 08:06 PM	#8
toddtheodd The oddest Todd around Join Date: May 2004 Location: Miami, Florida Posts: 1,418	I can see that those two are a little different in the way the bars end. How does that affect installation.

08-02-2004, 09:04 PM	#10
68 chevy truck-TPI A WORK IN PROGRESS Join Date: Apr 2004 Location: toccoa, georgia Posts: 205	try early classics enterprises. that's were i got my brand new one for my 68 chevy.

08-03-2004, 08:03 AM	#11
JJR Registered User Join Date: Apr 2000 Location: Leesburg, GA Posts: 746	Currently, I have three 1 1/4" bars. I got all of them off 73-87 3/4 and 1 ton trucks. I was not planning on selling one but after buying back to school supplies for my four kids, I could use all the extra funds I can get. I would be willing to sell one for $45 (bar only). Shipping to Ft Worth would be under $20. I also have a set of Energy Suspension sway bar bushings (black with caps) that I would include for an extra $25. Let me know if you are interested. __________________ FOUNDING MEMBER OF THE DRUM BRAKE CLUB Second Owner 70 C-10 Second Owner 93 GMC C1500 Third Owner 99 C2500 Crew Cab Short Bed

08-03-2004, 08:22 AM	#12
chassispro Registered User Join Date: Jun 2000 Location: Seneca, SC, USA Posts: 52	JJR, I sent you a PM.

08-03-2004, 11:34 AM	#13
stelth2002 Young Gun wth Fast Inline Join Date: Jan 2002 Location: Idaho Posts: 1,475	PM also sent __________________ 1967 Chevrolet LWB with built 292! 415 ft. lbs of torque, 4 speed :O with 27% overdrive too, 3.73 Posi. Frame and body done... getting painted!!!

08-03-2004, 12:07 PM	#14
toddtheodd The oddest Todd around Join Date: May 2004 Location: Miami, Florida Posts: 1,418	Nice of everybody to let the person who originally made the post say if he wanted it or not before trying to get it for themselves. JJR, I appreciate the offer. PM sent. Todd

08-03-2004, 12:25 PM	#15
JJR Registered User Join Date: Apr 2000 Location: Leesburg, GA Posts: 746	Looks like one of the bars and the bushings are going to toddtheodd. If the sale falls through I will re-post. I am willing to sale one more sway bar (bar only) for $45. I need to keep one for my brother-in-laws truck. I currently have a interest in the bar and was asked by another to post a pic. This is a pick of a bar I sold on E-Bay last year. I don't have a good set of mounting brackets anymore. The bars I am selling will be cleaned and painted black with rustoleum spray paint. Attached Images __________________ FOUNDING MEMBER OF THE DRUM BRAKE CLUB Second Owner 70 C-10 Second Owner 93 GMC C1500 Third Owner 99 C2500 Crew Cab Short Bed Last edited by JJR; 08-03-2004 at 12:28 PM.



Register or Log In To remove these advertisements.

08-03-2004, 12:26 PM	#16
stelth2002 Young Gun wth Fast Inline Join Date: Jan 2002 Location: Idaho Posts: 1,475	I'll opt out for toddtheodd. Anyone else have one? __________________ 1967 Chevrolet LWB with built 292! 415 ft. lbs of torque, 4 speed :O with 27% overdrive too, 3.73 Posi. Frame and body done... getting painted!!!

08-05-2004, 07:47 AM	#17
JJR Registered User Join Date: Apr 2000 Location: Leesburg, GA Posts: 746	Pic for toddtheodd Todd, as requested, here is a pic of the bar and bushings. Attached Images __________________ FOUNDING MEMBER OF THE DRUM BRAKE CLUB Second Owner 70 C-10 Second Owner 93 GMC C1500 Third Owner 99 C2500 Crew Cab Short Bed

08-05-2004, 08:23 AM	#18
toddtheodd The oddest Todd around Join Date: May 2004 Location: Miami, Florida Posts: 1,418	Thank you sir. Looks great. Can't wait to hit a turn after installing it

Register or Log In To remove these advertisements.