4x4 exhaust routing - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Bram · 08-05-2004, 05:46 PM

Does anyone have any pictures of they're exhaust routed around the transfer case, and if so what size exhaust? Thanks.

Blazer1970 · 08-05-2004, 07:08 PM

I have 2 1/2" going over the top of the 205. It is pretty obvious where it has to go - look for the area with the most clearance.

JimKshortstep4x4 · 08-05-2004, 08:18 PM

Here is a pic of a 2 1/4" exhaust pipe. The pipe fits into a "v" created by the cross member and the transfer case. The closer to the floor that you run the pipe the more clearance that you can have. As you can see in the pic the pipe is pretty tight the way it is located.

Jim

Bram · 08-06-2004, 08:58 AM

Thanks JimKshortstep4x4, Thats exactly what I was looking for.

**Yukon Jack** · 08-06-2004, 10:02 AM

Here's how the 2" exhaust that used to be on my 69 K20. Enjoy the greasy pics! This is the T221.

Bram · 08-06-2004, 10:53 AM

Thanks Yukon, I remember those pics, looks very familiar to my old setup (GREASE and OIL every where).

08-05-2004, 05:46 PM	#1
Bram Broke Join Date: Aug 2001 Location: West Plains,MO Posts: 385	4x4 exhaust routing Does anyone have any pictures of they're exhaust routed around the transfer case, and if so what size exhaust? Thanks. __________________ 72CheyenneSuper1ton4x4BigBlock

08-05-2004, 07:08 PM	#2
Blazer1970 Registered User Join Date: Dec 1999 Location: Old Mission, MI, USA Posts: 2,507	I have 2 1/2" going over the top of the 205. It is pretty obvious where it has to go - look for the area with the most clearance. __________________ Tim

08-05-2004, 08:18 PM	#3
JimKshortstep4x4 Senior Member Join Date: Jul 2001 Location: Muskegon,MI,USA Posts: 6,026	Here is a pic of a 2 1/4" exhaust pipe. The pipe fits into a "v" created by the cross member and the transfer case. The closer to the floor that you run the pipe the more clearance that you can have. As you can see in the pic the pipe is pretty tight the way it is located. Jim Attached Images

08-06-2004, 08:58 AM	#4
Bram Broke Join Date: Aug 2001 Location: West Plains,MO Posts: 385	Thanks JimKshortstep4x4, Thats exactly what I was looking for. __________________ 72CheyenneSuper1ton4x4BigBlock

08-06-2004, 10:02 AM	#5
Yukon Jack Post Whore Join Date: Feb 2000 Location: Rose Hill, KS, USA Posts: 12,686	Here's how the 2" exhaust that used to be on my 69 K20. Enjoy the greasy pics! This is the T221. Attached Images __________________ 1970 Blazer with a 400 sbc and 4" lift 1980 Pontiac Trans Am, 455 Oldsmobile 2012 Kawasaki Concours 14

08-06-2004, 10:53 AM	#6
Bram Broke Join Date: Aug 2001 Location: West Plains,MO Posts: 385	Thanks Yukon, I remember those pics, looks very familiar to my old setup (GREASE and OIL every where). __________________ 72CheyenneSuper1ton4x4BigBlock



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.