|
|
|
08-09-2004, 03:48 PM
|
#1 |
|
its all about the +6 inches
Join Date: Jan 2001
Location: Hilliard Ohio
Posts: 2,690
|
Later HEI question
On the later HEI with the flat 4 pin plug, did some one here say you are able to jump a wire or a couple wires and make it work with no computer?
I seem to remember 'ole Fast 68 saying something like that, but I do not remember the details. Been helping a neighbor replace the crappy Turbo charged 301 in his 81 trans am and running a chevy 350 with a 700R4. It's a pretty cool car with the 4 wheel disc brakes (for those who enjoy replacing rear pads every 30,000 miles) and leaky T-tops. Anyone interested in the left over 301 turbo motor? I can make you a good deal, tranny can go with it too. |
|
|
|
08-09-2004, 03:53 PM
|
#2 |
|
Don't say "Oops!", Doctor
Join Date: Nov 2003
Location: Houston, TX
Posts: 677
|
This is the best information I could find. He specifically talks about 4, 5 and 7 pin modules. From the sounds of it, a 5 pin can be used by plugging the extra hold and 7 pin units are right out because they don't have an advance mechanism (computer controlled).
__________________
'Mutt 1968 CST LWB: R.I.P. 1967 Chevelle: TPI 454 beast 1967 C10 SWB: Claimed when Bumpster didn't put it on his list Last edited by shuttermutt; 08-09-2004 at 04:03 PM. |
|
|
|
|
08-09-2004, 04:23 PM
|
#3 |
|
Registered User
Join Date: May 2000
Location: Storm Lake, Ia
Posts: 1,449
|
Longhornman if it is the one with extra jumper pigtail look on it for letters.
Jumper A and C together
__________________
|
|
|
|
|
08-09-2004, 06:19 PM
|
#4 |
|
Young Gun wth Fast Inline
Join Date: Jan 2002
Location: Idaho
Posts: 1,475
|
Yes you can jumper the wires togather to make it work. Ive done it
__________________
1967 Chevrolet LWB with built 292! 415 ft. lbs of torque, 4 speed :O with 27% overdrive too, 3.73 Posi. Frame and body done... getting painted!!! |
|
|
|
|
08-09-2004, 07:33 PM
|
#5 |
|
Registered User
Join Date: Jan 2004
Location: NH
Posts: 2,266
|
$99 bucks for a new Billet recurved HEI w/V/Advance, 50,000 volt coil, cap, rotor.
Plus shipping, I dont know what happened to there sight for information or phone number, But it is where I got mine and so far works great. http://www.procompelectronics.com/
__________________
1967 C10 - SWBSS Pro Street 427sbc, 700R4 & 4.10 Gears 1948 Chevy FleetMaster Coupe, LS1, (almost done) 1950 Chevy StyleLine Coupe 250/6 3x2 Dueces 2009 Toyota Tundra 1996 Harley RoadKing "I maybe getting old, but I can still burn rubber with the best of them" |
|
|
|
|
08-09-2004, 09:32 PM
|
#6 |
|
Registered User
Join Date: Apr 2004
Location: Clanton, AL
Posts: 1,253
|
You guys are answering my questions before I can even ask them.
Longhornman, let us know how it goes & which ones you did what to, please.
__________________
85' CUCV M1009!!! The newest addition! 6.2diesel, Th400, NP208, & only 36k miles! 70' C-10 LWB Fleetside - Looking good these days!  05' Dodge Neon 88' Winner Escape Sport 1750 - 4.3v6 94' Seadoo SP 84' Honda TRX200, bare nekkid. Just a frame & tires. Always looking for another project or any good deal! 
|
|
|
|
|
08-09-2004, 10:27 PM
|
#7 |
|
its all about the +6 inches
Join Date: Jan 2001
Location: Hilliard Ohio
Posts: 2,690
|
Bowtie...99 bucks is about all we have to make the whole swap work, so I doubt he'd want to go that route.
 So I jump A and C together...sweet. Thanks. |
|
|
|
|
08-09-2004, 11:12 PM
|
#8 |
|
Watch out for your cornhole !
 
Join Date: Jun 2003
Location: Azle, Texas
Posts: 14,162
|
Yes, "A" to "C" makes it work stand alone.
__________________
I'm on the Instagram- @Gearhead_Kevin |
|
|
|
 |
| Bookmarks |
|
|
Hybrid Mode
