Polyurethane Panhard Bushings? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

68 Suburban · 08-10-2004, 12:53 PM

Does anyone know where I can get polyurethane panhard bushings for my stock panhard bar?

*FormerMember* · 08-10-2004, 01:06 PM

www.classicheartbeat.com

Ordered mine from Wes.

Custom 68 · 08-10-2004, 01:11 PM

chris
I think I got mine from GMCPauls. Yep found the receipt the PN was J-RTAB302 for the "Track Arm Bushing" This was actually in 2002 so you probably could check the number.
They were 17.00 at the time
Dave

68 Suburban · 08-10-2004, 01:12 PM

Thanks guys.

cdowns · 08-10-2004, 04:12 PM

my local autozone,pepboys and advancedauto all carry them over the counter

68 Suburban · 08-10-2004, 11:15 PM

Quote:

Originally Posted by cdowns

my local autozone,pepboys and advancedauto all carry them over the counter

are they pretty much the same for all GM vehicles that call for them?

JJR · 08-11-2004, 07:23 AM

The Energy Suspension part number is 3.7104 (60-72 Rear Tracking Arm Bushing Set). You re-use the outer sleeve of your existing bushings. I got my set at the local parts store for under $10. My original bushings were shot so you could shake the bed side to side and get a lot of movement (and a clanking noise). The new poly bushings made things tight again.

68 Suburban · 08-11-2004, 02:08 PM

Quote:

Originally Posted by JJR

The Energy Suspension part number is 3.7104 (60-72 Rear Tracking Arm Bushing Set). You re-use the outer sleeve of your existing bushings. I got my set at the local parts store for under $10. My original bushings were shot so you could shake the bed side to side and get a lot of movement (and a clanking noise). The new poly bushings made things tight again.

Is for the actual panhard bar, or is this the number for the trailing arm bushings? Thanks

JJR · 08-11-2004, 02:23 PM

That is the part number for the 1/2 ton panhard bar (tracking arm) bushings. The part number for 3/4 ton panhard bar is 3.7116 . The part number for the rear trailing arm bushings is 3.3123 . Here is the link for Chevy 2wd Trucks: http://www.energysuspension.com/pages/c2wd1.html

08-10-2004, 12:53 PM	#1
68 Suburban Registered User Join Date: Oct 2000 Location: From Chicago, Live in Phoenix, AZ Posts: 6,802	Polyurethane Panhard Bushings? Does anyone know where I can get polyurethane panhard bushings for my stock panhard bar? __________________ Just sitting here contemplating contemplation.

08-10-2004, 01:11 PM	#3
Custom 68 Registered User Join Date: Nov 2001 Location: Springfield, MO Posts: 2,939	chris I think I got mine from GMCPauls. Yep found the receipt the PN was J-RTAB302 for the "Track Arm Bushing" This was actually in 2002 so you probably could check the number. They were 17.00 at the time Dave __________________ Dave 1968 Custom Chevy with turbo charged 5.3 gen III 4l80e swap 1967-71 GMC 3/4 ton long step 4x4 (not sure what year exactly?) "A good friend will bail you out of jail...but a true friend will be sitting next to you saying "that was frekin awesome". "If it doesn't fit force it...If it breaks then it needed to be replaced anyway!"

08-10-2004, 01:12 PM	#4
68 Suburban Registered User Join Date: Oct 2000 Location: From Chicago, Live in Phoenix, AZ Posts: 6,802	Thanks guys. __________________ Just sitting here contemplating contemplation.

08-10-2004, 04:12 PM	#5
cdowns Senior Member Join Date: Jan 2003 Location: daytonabeach Posts: 22,956	my local autozone,pepboys and advancedauto all carry them over the counter __________________ 71c-10 350/2004r/4:11 lowered3/4 longbed/dead by hurricane MEANING OF DEATH::::: SOMEBODY ELSE GETS YOUR STUFF DONT BELIEVE EVERYTHING YOU THINK TAKE MY ADVISE;I DON'T USE IT ANYWAY

08-11-2004, 07:23 AM	#7
JJR Registered User Join Date: Apr 2000 Location: Leesburg, GA Posts: 746	The Energy Suspension part number is 3.7104 (60-72 Rear Tracking Arm Bushing Set). You re-use the outer sleeve of your existing bushings. I got my set at the local parts store for under $10. My original bushings were shot so you could shake the bed side to side and get a lot of movement (and a clanking noise). The new poly bushings made things tight again. __________________ FOUNDING MEMBER OF THE DRUM BRAKE CLUB Second Owner 70 C-10 Second Owner 93 GMC C1500 Third Owner 99 C2500 Crew Cab Short Bed

08-10-2004, 01:06 PM	#2
FormerMember Account Suspended Join Date: Feb 2004 Posts: 3,051	www.classicheartbeat.com Ordered mine from Wes.

08-11-2004, 02:23 PM	#9
JJR Registered User Join Date: Apr 2000 Location: Leesburg, GA Posts: 746	That is the part number for the 1/2 ton panhard bar (tracking arm) bushings. The part number for 3/4 ton panhard bar is 3.7116 . The part number for the rear trailing arm bushings is 3.3123 . Here is the link for Chevy 2wd Trucks: http://www.energysuspension.com/pages/c2wd1.html __________________ FOUNDING MEMBER OF THE DRUM BRAKE CLUB Second Owner 70 C-10 Second Owner 93 GMC C1500 Third Owner 99 C2500 Crew Cab Short Bed



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.