Passenger Side Fresh Air Inlet? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

*1972C10* · 08-11-2004, 08:20 PM

I was wondering if any trucks came with a passenger side Air duct/inlet I was entertaining the idea or putting a dual snorkel setup on my 85 and wondered if any trucks came with pass are inlet or if anyone has done this ?

The core support has a knockout for it but i havent seen anything other than drivers side inlet.

cliffsta · 08-11-2004, 09:59 PM

ummmm, the fresh air duct on my 1980 is on the passenger side.

**swervin ervin** · 08-11-2004, 10:18 PM

I think he meant to say drivers side.

*1972C10* · 08-12-2004, 01:14 AM

Quote:

Originally Posted by swervin ervin

I think he meant to say drivers side.

My truck used to be a mail truck so i get confused

Yeah i meant to say drivers wasnt thinking lol

I am thinking of adding a second inlet on my 454 air breather but i would like to find an air duct that matches the passengers If possible

SCOTI · 08-12-2004, 10:42 AM

I got a second pass side fitting for the core support & plan to flip it for use on the drivers side. You'll need to re-route the a/c condensor fittings/lines a little (@ least on mine I'll need to) but there should be a spot big enough to run the second air inlet.

SanitysBane · 08-11-2004, 10:45 PM

yeah mine is on the pasinger side, im going to knock mine out on the driver saide to put in a dual snorkle $ometime

cliffsta · 08-11-2004, 11:16 PM

well up until a few weeks ago i didn't even have that duct, it was MIA. I had 8 bucks so i went and got one from the chevy dealership. my dad said it was worth it since it was designed to run with one, and at 8 bucks you can't go wrong.

*1972C10* · 08-13-2004, 02:32 AM

my ac lines are on the passenger side.

SCOTI · 08-13-2004, 05:11 PM

Quote:

Originally Posted by 1972C10

my ac lines are on the passenger side.

Condenser inlet & outlet on the same side?

*1972C10* · 08-13-2004, 05:53 PM

Yeah its an 85 It did have an alum line getup that went across the top of the radiator cover but im putting a later model bracket setup on it so its all gonna be on the passenger side .

08-11-2004, 08:20 PM	#1
1972C10 Account Suspended Join Date: Dec 2003 Location: Texas Posts: 2,686	Passenger Side Fresh Air Inlet? I was wondering if any trucks came with a passenger side Air duct/inlet I was entertaining the idea or putting a dual snorkel setup on my 85 and wondered if any trucks came with pass are inlet or if anyone has done this ? The core support has a knockout for it but i havent seen anything other than drivers side inlet.

08-11-2004, 09:59 PM	#2
cliffsta Stepsides RULE Join Date: Jul 2004 Location: Pineville, LA Posts: 1,921	ummmm, the fresh air duct on my 1980 is on the passenger side. __________________ 1981 Chevy C10 Custom Deluxe Stepside 350 V8, headers, side exhausts, 3-speed auto SOLD 1980 Chevy C10 Custum Deluxe Stepside 305 V8, Edelbrock Performer Intake, Edelbrock 1406 600CFM 4-barrel, TH350C. Bent rod. SOLD 1984 GMC Sierra Classic Longbed 6.2L Diesel SOLD 2009 Kawasaki KLX-250S too many mods for this signature 1999 Honda Accord EX 4-cylinder, 17" Motegi Wheels 215/45/17 Sumitomo tires, Tein S-Tech lowering springs, KYB GR2 shocks, Acura TL 20mm rear swaybar, debadged, blackhoused headlights, Short-Ram Intake Cardomain of the Accord

08-11-2004, 10:18 PM	#3
swervin ervin You get what you pay for Join Date: Dec 1999 Location: Cherryville, NC Posts: 4,798	I think he meant to say drivers side. __________________ Mike 1985 Chevy C-10

08-12-2004, 10:42 AM	#5
SCOTI Registered User Join Date: Apr 2001 Location: DALLAS,TX Posts: 22,064	I got a second pass side fitting for the core support & plan to flip it for use on the drivers side. You'll need to re-route the a/c condensor fittings/lines a little (@ least on mine I'll need to) but there should be a spot big enough to run the second air inlet. __________________ 67SWB-B.B.RetroRod 64SWB-Recycle 89CCDually-Driver/Tow Truck 99CCSWB Driver All Fleetsides @rattlecankustoms in IG Building a small, high rpm engine with the perfect bore, stroke and rod ratio is very impressive. It's like a highly skilled Morrocan sword fighter with a Damascus Steel Scimitar..... *Cubic inches is like Indiana Jones with a cheap pistol.*

08-11-2004, 10:45 PM	#6
SanitysBane Registered User Join Date: May 2004 Location: Lubbock, Texas Posts: 2,121	yeah mine is on the pasinger side, im going to knock mine out on the driver saide to put in a dual snorkle $ometime __________________ '96 Nissan Pathfinder '02 Firebird Trans Am. '88 K5 Blazer

08-11-2004, 11:16 PM	#7
cliffsta Stepsides RULE Join Date: Jul 2004 Location: Pineville, LA Posts: 1,921	well up until a few weeks ago i didn't even have that duct, it was MIA. I had 8 bucks so i went and got one from the chevy dealership. my dad said it was worth it since it was designed to run with one, and at 8 bucks you can't go wrong. __________________ 1981 Chevy C10 Custom Deluxe Stepside 350 V8, headers, side exhausts, 3-speed auto SOLD 1980 Chevy C10 Custum Deluxe Stepside 305 V8, Edelbrock Performer Intake, Edelbrock 1406 600CFM 4-barrel, TH350C. Bent rod. SOLD 1984 GMC Sierra Classic Longbed 6.2L Diesel SOLD 2009 Kawasaki KLX-250S too many mods for this signature 1999 Honda Accord EX 4-cylinder, 17" Motegi Wheels 215/45/17 Sumitomo tires, Tein S-Tech lowering springs, KYB GR2 shocks, Acura TL 20mm rear swaybar, debadged, blackhoused headlights, Short-Ram Intake Cardomain of the Accord

08-13-2004, 02:32 AM	#8
1972C10 Account Suspended Join Date: Dec 2003 Location: Texas Posts: 2,686	my ac lines are on the passenger side.

08-13-2004, 05:53 PM	#10
1972C10 Account Suspended Join Date: Dec 2003 Location: Texas Posts: 2,686	Yeah its an 85 It did have an alum line getup that went across the top of the radiator cover but im putting a later model bracket setup on it so its all gonna be on the passenger side .



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.