Wd-40 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

76bonanza · 08-13-2004, 07:47 PM

Is it ok to soak bolts overnite in WD-40?

*1972C10* · 08-13-2004, 09:28 PM

Why wouldnt it be?

76bonanza · 08-13-2004, 10:02 PM

Who knows seems like when I think something is ok. It never is.

**68 Stepside** · 08-13-2004, 10:23 PM

If you're looking to free stubborn bolts, use PB Blaster. It's actually a penetrating catalyst, and works way better than WD-40. Just my $.02, good luck

screwballl · 08-14-2004, 09:52 AM

Quote:

Originally Posted by 68 Stepside

If you're looking to free stubborn bolts, use PB Blaster. It's actually a penetrating catalyst, and works way better than WD-40. Just my $.02, good luck

i work at Ace hardware and i agree totally.. PB Blaster is 1000x better for loosening nuts and bolts and you should only need at most an hour

Senor_paco · 08-14-2004, 11:22 PM

and if that doesn't work, a dose of "hot wrench" will fix it up. nothing helps bust rusted bolts loose like the expansion from 2000+ degrees! make sure to let them cool a bit before tryign to work loose. sometimes that gives you the edge.

Grim Reaper · 08-16-2004, 03:03 PM

WD-40 is like american beer....... Ohhh I won't go there.

WD-40= Water Displacement formula try # 40. It was made for drying out ignition on automobiles and gas engines. Through great marking lies somebody decided that it would be the end all be all to everything from sticking muffins to loosening bolts....it's not.

PB blaster is the shnizle.

**N2TRUX** · 08-13-2004, 10:54 PM

Quote:

Originally Posted by 76bonanza

Is it ok to soak bolts overnite in WD-40?

Yes it is ok to soak your bolts over nite. Don't soak your nuts over nite though, they might shrink.... :p

*1972C10* · 08-16-2004, 04:32 PM

AeroKroil Is some good chit tooo but its like 10 bucks a can.

BeerMonkeY · 08-16-2004, 05:15 PM

pb is the best for removing stubborn bolts, however wd-40 works for everthing else (removing oil stains, bugs, tar from truck)

loweredd · 08-18-2004, 08:22 PM

Quote:

Originally Posted by 1972C10

AeroKroil Is some good chit tooo but its like 10 bucks a can.

PussBlaster is junk. Kroil is THE best penetrating oil you will ever use. PERIOD.

MylilBowTie · 08-17-2004, 04:54 AM

I have had real good luck with Kroil

bulky · 08-17-2004, 08:37 PM

You only need two tools.... Duct Tape and WD40. If it moves and it shouldnt, Duct Tape it.....if it doesnt move and it should, WD40 it!

SanitysBane · 08-17-2004, 10:32 PM

if you can't duck it, f*** it!

08-13-2004, 07:47 PM	#1
76bonanza Senior Member Join Date: Mar 2003 Location: St robert Mo Posts: 2,001	Wd-40 Is it ok to soak bolts overnite in WD-40? __________________ 1968 c10 lowered 3" 4" 355/Th400 built by Hatfield racing in joplin MO

08-13-2004, 10:02 PM	#3
76bonanza Senior Member Join Date: Mar 2003 Location: St robert Mo Posts: 2,001	Who knows seems like when I think something is ok. It never is. __________________ 1968 c10 lowered 3" 4" 355/Th400 built by Hatfield racing in joplin MO

08-13-2004, 10:23 PM	#4
68 Stepside huh? Join Date: May 2000 Location: Washington, Illinois Posts: 5,690	If you're looking to free stubborn bolts, use PB Blaster. It's actually a penetrating catalyst, and works way better than WD-40. Just my $.02, good luck __________________ Someday when I'm lonely, Wishing you weren't so far away, Then I will remember Things we said today. RIP El Jay

08-16-2004, 03:03 PM	#7
Grim Reaper Registered User Join Date: Jul 2001 Location: Atlanta GA Posts: 1,704	WD-40 is like american beer....... Ohhh I won't go there. WD-40= Water Displacement formula try # 40. It was made for drying out ignition on automobiles and gas engines. Through great marking lies somebody decided that it would be the end all be all to everything from sticking muffins to loosening bolts....it's not. PB blaster is the shnizle. __________________ Grim-Reaper 70 Pontiac LeMans Sport Convertible, worlds longest resto in progress Looking for 71-72 2wd Blazer or Jimmy Project

08-16-2004, 05:15 PM	#10
BeerMonkeY sold Join Date: Mar 2004 Location: PA Posts: 227	pb is the best for removing stubborn bolts, however wd-40 works for everthing else (removing oil stains, bugs, tar from truck) __________________ 07 Rubicon, 2" lift,35's on some bling'n 20"s, warn winch. (20's for sale, 5on5) looking for 73-87 crew cab with 8' bed,2wd,PM me if you see one around

08-13-2004, 09:28 PM	#2
1972C10 Account Suspended Join Date: Dec 2003 Location: Texas Posts: 2,686	Why wouldnt it be?

08-14-2004, 11:22 PM	#6
Senor_paco Registered User Join Date: Mar 2003 Location: San Antonio, TX Posts: 441	and if that doesn't work, a dose of "hot wrench" will fix it up. nothing helps bust rusted bolts loose like the expansion from 2000+ degrees! make sure to let them cool a bit before tryign to work loose. sometimes that gives you the edge.

08-16-2004, 04:32 PM	#9
1972C10 Account Suspended Join Date: Dec 2003 Location: Texas Posts: 2,686	AeroKroil Is some good chit tooo but its like 10 bucks a can.

08-17-2004, 04:54 AM	#12
MylilBowTie Right turn Clyde Join Date: Nov 2002 Location: Cincinnati, Ohio Posts: 2,911	I have had real good luck with Kroil __________________ 1974 C25 LWB: 454 4bbl Carb / TH400 / 3.73 1992 Camaro RS 305 TBI

08-17-2004, 08:37 PM	#13
bulky Bulky Join Date: Aug 2004 Location: Rhode Island Posts: 163	Only 2 tools needed in the tool box You only need two tools.... Duct Tape and WD40. If it moves and it shouldnt, Duct Tape it.....if it doesnt move and it should, WD40 it!

08-17-2004, 10:32 PM	#14
SanitysBane Registered User Join Date: May 2004 Location: Lubbock, Texas Posts: 2,121	if you can't duck it, f*** it! __________________ '96 Nissan Pathfinder '02 Firebird Trans Am. '88 K5 Blazer



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.