|
Register or Log In To remove these advertisements. |
|
|
|
|||||||
 |
|
|
Thread Tools | Display Modes |
|
|
08-27-2004, 10:23 AM
|
#1 |
|
"Ochre Ogre"
Join Date: Apr 2000
Location: Springfield, MN
Posts: 3,558
|
Need bolt lengths for BB exhaust manifolds.
Does anyone have the bolt lengths for the stock cast iron exhaust manifolds for a big block? (w/o A/C) The ones on my C-30 are so rusted and rounded over. It is time to replace them. thanks
__________________
Bowtie Truck Stop Inc. Mid-West GM Truck Restoration Parts Supplier Your Key Parts, Auto Metal Direct, Dynacorn, and Goodmark dealer. like us @ www.facebook.com/BowtieTruckStop 1971 C-10 Suburban (Ochre) 1971 K-10 Suburban (Ochre) 1972 C-10 Suburban (Ochre) 1972 K-20 Suburban (Yellow- that just aint right!) Springfield, Minnesota 56087 |
|
|
|
08-27-2004, 02:00 PM
|
#2 |
|
Watch out for your cornhole !
 
Join Date: Jun 2003
Location: Azle, Texas
Posts: 14,162
|
Mine were 1 1/8 inches long stock, but I couldn't find them that length, so I used 1 1/4 with a washer under each one.
__________________
I'm on the Instagram- @Gearhead_Kevin |
|
|
|
|
08-27-2004, 06:03 PM
|
#3 |
|
"Ochre Ogre"
Join Date: Apr 2000
Location: Springfield, MN
Posts: 3,558
|
I pulled one tonight when I got home. Mine was 1-1/4 and didn't use a washer. I measured the depth and it looks like it would be safe to almost 1-1/2. Atleast on the first bolt hole. Time to order an extra set of ARP BB intake bolts since they are the right size and length @ 3/8-16 x 1-1/4" for the exhaust manifolds too. Thanks TX.
__________________
Bowtie Truck Stop Inc. Mid-West GM Truck Restoration Parts Supplier Your Key Parts, Auto Metal Direct, Dynacorn, and Goodmark dealer. like us @ www.facebook.com/BowtieTruckStop 1971 C-10 Suburban (Ochre) 1971 K-10 Suburban (Ochre) 1972 C-10 Suburban (Ochre) 1972 K-20 Suburban (Yellow- that just aint right!) Springfield, Minnesota 56087 |
|
|
|
|
| Bookmarks |
|
|
Hybrid Mode
