70GMC Short Step Louisville $700 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

ty1295 · 10-09-2004, 02:47 PM

70 GMC Short Step

Most likely will be moving very soon, need to get rid of it. Taking a big loss, but time to move on.

Truck has
New dual exhaust 3kmiles tops, flowmaster type mufflers, $450 to have done
Front disc brake conversion, new ball joints, 1 new caliper, new pads
Newer Chevy rally rims, rear are still in box, centers never installed yet
New tires, again ~$3k miles on them
th350 tranny with about 15k miles, shifts perfect, rear seal is leaking.
good spare pass door
good used trailer arms (not installed yet)

LOTS of free rust, assume every body panel needs replaced, not just fixed.

Both floor repair panels (not installed yet, not worth it on this cab)

Has a custom hidden hitch behind license plate.

2" lowered front, 4" rear (not installed yet) springs. Fronts have about 3k miles on it.

Dash has tach installed in factory location, looks good, not a factory tach though.

B&M Floor Shift

I have a few other odds, ends.

Truck runs righ now, although I am selling it WITHOUT the motor.

I will install a motor for someone, if they deliver it for cost of parts though to make it drivable.

Mechanically truck is in good running condition, body is full or rust, etc.

If someone wants some of the key parts from it, and not the whole truck email me. I may part out later if it doesn't sell.

Located just outside Louisville KY.

I have put ~$2500 in past 2 years into truck. If I can get $700 cash right now, it will be sold. Other offers will be considered.

Pics can be seen @ http://s94691562.onlinehome.us/gallery/70GMC

email me any questions, offers to ty1295@insightbb.com

LUV2XCLR8 · 10-09-2004, 04:15 PM

DAMN

Huck · 10-09-2004, 09:31 PM

Sent you an e-mail. Huck

67ChevyC10Stepside · 10-10-2004, 12:23 PM

what kind of shape are the step fenders in if you're gonna tear it apart.

LUV2XCLR8 · 10-10-2004, 01:05 PM

U NEED MONEY, OR DO YOU WANT A TRADE

ty1295 · 10-10-2004, 02:32 PM

Quote:

LOTS of free rust, assume every body panel needs replaced, not just fixed.

Only trade I would consider is a utility trailer.

I don't need anymore cars. Like I said, possibly moving, don't need MORE crap.

truckman32 · 10-10-2004, 08:22 PM

i'm interested in the 70 gmc i live in mt. sterling ky, what about the engine that's in the truck would you sell it running with the engine if so tell me about the engine

ty1295 · 10-10-2004, 11:46 PM

No offense, but getting a bit flusterated.

so far I have been asked twice about the engine and once about sheetmetal.

I thought I was CLEAR in my description.

No the engine is not included, unless you have ~$5k additional in cash. (long story don't ask, and is going into another car I have)

Assume all sheetmetal needs replaced.

You do get LOW mile tires, LOW mile newer style rally rims (2 never been on, center caps still in box)

Good th350 trans.

Again, expect all body panels to need replaced and NO ENGINE!!!!

The tires and rims alone cost me more than $700. Exhaust system was another $450.

Sorry about getting flusterated!

10-09-2004, 02:47 PM	#1
ty1295 Registered User Join Date: Mar 2002 Location: jeffersonville, IN Posts: 99	70GMC Short Step Louisville $700 70 GMC Short Step Most likely will be moving very soon, need to get rid of it. Taking a big loss, but time to move on. Truck has New dual exhaust 3kmiles tops, flowmaster type mufflers, $450 to have done Front disc brake conversion, new ball joints, 1 new caliper, new pads Newer Chevy rally rims, rear are still in box, centers never installed yet New tires, again ~$3k miles on them th350 tranny with about 15k miles, shifts perfect, rear seal is leaking. good spare pass door good used trailer arms (not installed yet) LOTS of free rust, assume every body panel needs replaced, not just fixed. Both floor repair panels (not installed yet, not worth it on this cab) Has a custom hidden hitch behind license plate. 2" lowered front, 4" rear (not installed yet) springs. Fronts have about 3k miles on it. Dash has tach installed in factory location, looks good, not a factory tach though. B&M Floor Shift I have a few other odds, ends. Truck runs righ now, although I am selling it WITHOUT the motor. I will install a motor for someone, if they deliver it for cost of parts though to make it drivable. Mechanically truck is in good running condition, body is full or rust, etc. If someone wants some of the key parts from it, and not the whole truck email me. I may part out later if it doesn't sell. Located just outside Louisville KY. I have put ~$2500 in past 2 years into truck. If I can get $700 cash right now, it will be sold. Other offers will be considered. Pics can be seen @ http://s94691562.onlinehome.us/gallery/70GMC email me any questions, offers to ty1295@insightbb.com __________________ Jeff Scott '70 GMC Stepside, Short box '63 Nova '92 GMC typhoon '95 Tahoe Last edited by ty1295; 10-10-2004 at 11:48 PM.

10-09-2004, 04:15 PM	#2
LUV2XCLR8 The LuvShack Garage Join Date: Jan 2004 Location: Maple Grove, TN (West Side) Posts: 30,484	DAMN __________________ Owner/Op: "TN Classic Transport Carriers" The Toy: "Square Vette" 72 Hybrid Blazer Toy Barn: "LuvShack" 40 x 60 x 20 Shop Tow Piggy:"Maddy" 88 Silverado 3500 Hauler: "Feathers" 14 Aluma 8218T

10-10-2004, 12:23 PM	#4
67ChevyC10Stepside Registered User Join Date: Mar 2004 Location: Butler PA Posts: 3,034	what kind of shape are the step fenders in if you're gonna tear it apart. __________________ 67 c-10, 400 SB, TH350, 4.10 gears, Blazer tank,camaro tach, sidemarker fuel fill (soon) WTB: stepside parts, 67 front end parts, 67 small window cab. posi for 3.73 or 4.10 for 12 bolt and 10 bolt.

10-10-2004, 01:05 PM	#5
LUV2XCLR8 The LuvShack Garage Join Date: Jan 2004 Location: Maple Grove, TN (West Side) Posts: 30,484	U NEED MONEY, OR DO YOU WANT A TRADE __________________ Owner/Op: "TN Classic Transport Carriers" The Toy: "Square Vette" 72 Hybrid Blazer Toy Barn: "LuvShack" 40 x 60 x 20 Shop Tow Piggy:"Maddy" 88 Silverado 3500 Hauler: "Feathers" 14 Aluma 8218T Last edited by LUV2XCLR8; 10-10-2004 at 01:23 PM.

10-10-2004, 08:22 PM	#7
truckman32 AND HOLDING ON TO THE C10 Join Date: Jan 2003 Location: MT.STERLING,KY Posts: 390	i'm interested in the 70 gmc i live in mt. sterling ky, what about the engine that's in the truck would you sell it running with the engine if so tell me about the engine __________________ 66 swb/ss chevy c10 SOLD 62 swb/fs chevy c10 :p SOLD 84 swb/fs chevy c10 91 sdime 383/th350

10-09-2004, 09:31 PM	#3
Huck Senior Member Join Date: Jun 2001 Location: Shelbyville, KY Posts: 3,269	Sent you an e-mail. Huck

10-10-2004, 11:46 PM	#8
ty1295 Registered User Join Date: Mar 2002 Location: jeffersonville, IN Posts: 99	No offense, but getting a bit flusterated. so far I have been asked twice about the engine and once about sheetmetal. I thought I was CLEAR in my description. No the engine is not included, unless you have ~$5k additional in cash. (long story don't ask, and is going into another car I have) Assume all sheetmetal needs replaced. You do get LOW mile tires, LOW mile newer style rally rims (2 never been on, center caps still in box) Good th350 trans. Again, expect all body panels to need replaced and NO ENGINE!!!! The tires and rims alone cost me more than $700. Exhaust system was another $450. Sorry about getting flusterated! __________________ Jeff Scott '70 GMC Stepside, Short box '63 Nova '92 GMC typhoon '95 Tahoe



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.