Help with reproduction sheet metal - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Trifelynn · 10-17-2004, 11:25 PM

So, I got the blazer disassembled, and the next step is to fix the body. It looks as though I am going to try and buy the bedsides from the guy on the board...but I need some other parts, and it seems as though I am going to need the reproduction sheetmetal. Who has people had good experiences with? Here are the parts I am getting, and maybe different places are better than other with specific pieces.

Driver rocker(inner/outer)/floorpan/rockerbox
Passenger rocker (outer)/floorpan

also I need the piece at the back of the tailgate on the actual bed where the picture shows. I see some pieces that could be that piece, but I don't know for sure.

thanks in advance

*Gee_Emm* · 10-17-2004, 11:34 PM

I shopped around and ended up buying all my patch panels from Christians Classics, check out the main page for his website. He sells top quality patch panels at good prices. Do you need part of the actual bed floor or do you need the rear cross member? They sell patches for the floor in 16x48" chunks.

Trifelynn · 10-18-2004, 08:21 AM

It's the actual floor...

what is considered the rear cross member?
Isn't the crossmember underneath the bed? between the bed and the frame?

grnddwn · 10-18-2004, 11:17 AM

Don't buy Goodmark doors they don't fit worth a ****.

CHEVYE · 10-18-2004, 12:21 PM

tim christian is a goos guy to deal with @ christian`s classics.

10-17-2004, 11:25 PM	#1
Trifelynn Registered User Join Date: May 2004 Location: Williston, North Dakota Posts: 469	Help with reproduction sheet metal So, I got the blazer disassembled, and the next step is to fix the body. It looks as though I am going to try and buy the bedsides from the guy on the board...but I need some other parts, and it seems as though I am going to need the reproduction sheetmetal. Who has people had good experiences with? Here are the parts I am getting, and maybe different places are better than other with specific pieces. Driver rocker(inner/outer)/floorpan/rockerbox Passenger rocker (outer)/floorpan also I need the piece at the back of the tailgate on the actual bed where the picture shows. I see some pieces that could be that piece, but I don't know for sure. thanks in advance __________________ Always looking for a 2wd blazer

10-18-2004, 08:21 AM	#3
Trifelynn Registered User Join Date: May 2004 Location: Williston, North Dakota Posts: 469	It's the actual floor... what is considered the rear cross member? Isn't the crossmember underneath the bed? between the bed and the frame? __________________ Always looking for a 2wd blazer

10-18-2004, 12:21 PM	#5
CHEVYE my gas saver Join Date: Sep 2003 Location: Clarksville, TN Posts: 2,046	tim christian is a goos guy to deal with @ christian`s classics. __________________ 85' SWB, 4.3/TH350, getting ready for paint 84`SWB, 462ci./TH400, cowl hood, 15" billet spec., flows, blazer buckets/console, flat black 71`SWB, project ebay feedback

10-17-2004, 11:34 PM	#2
Gee_Emm Account Suspended Join Date: Sep 2000 Posts: 4,002	I shopped around and ended up buying all my patch panels from Christians Classics, check out the main page for his website. He sells top quality patch panels at good prices. Do you need part of the actual bed floor or do you need the rear cross member? They sell patches for the floor in 16x48" chunks.

10-18-2004, 11:17 AM	#4
grnddwn belly dragger Join Date: Feb 2002 Location: sherwood park AB. Canada Posts: 696	Don't buy Goodmark doors they don't fit worth a ****.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.