Steering column wiring harness question - The 1947 - Present Chevrolet & GMC Truck Message Board Network

mbtoomey · 10-19-2004, 08:29 PM

Do the after-market steering columns wiring, plug into the original wiring harness as advertisied, such as the CPP or Billet Specilties without any problems. If I'm gonna spend $500.00 I would like to think everything will work. I'm very close to completing my 71' swb/stepside. Pictures are soon.

Longhorn Man · 10-19-2004, 08:34 PM

Welcome to the forums!
While I have never bought one, nor even looked at one, I'm willing to bet a punch in the gut that the after market columns have the later style plug, which is flat. You can get am adapter from flat to horse shoe shaped connector at the dealer...although, I don't have the P/N here.
Are you going after market just for a tilt, or you wanting the chrome finish, or what.
If it is just for the tilt, you can get a van tilt that will look 99% original for WAY cheaper than that. (and look stock to all but the sharpest observer)

mbtoomey · 10-19-2004, 08:39 PM

Tilt and chrome. I feel 90% sure it will work but just wanted another opinion.

Longhorn Man · 10-19-2004, 08:45 PM

Yeah, the adapters are common...just ask what kind of turn signal harness plug does it have. I think that as long as the column is only equipped with the basics (no wiper controlls, stereo controlls, air bags, TV moniters...ect) and it is just a turn signal and 4 ways...it'll be the flat plug as on the 73 & up columns.

mbtoomey · 10-19-2004, 08:50 PM

Thank-you for the information. I'm gonna keep it simple.

ronthet · 10-21-2004, 04:36 PM

I found Early classic Enterprises have original wiring harness etc with all original connectors. They may be pricing but you may want to check with them. I was checking on the rear harness for my 68. 49.00 from fire wall to rear then 79.00 on to the fixtures. They stated the bulb recep would come out of old base and in with the new. Just a thought. I had to call them as could not find these items listed on web site. 1.888 number in lower left hand corner

10-19-2004, 08:29 PM	#1
mbtoomey mbtoomey Join Date: Oct 2004 Location: Oak Ridge, TN Posts: 8	Steering column wiring harness question Do the after-market steering columns wiring, plug into the original wiring harness as advertisied, such as the CPP or Billet Specilties without any problems. If I'm gonna spend $500.00 I would like to think everything will work. I'm very close to completing my 71' swb/stepside. Pictures are soon.

10-19-2004, 08:34 PM	#2
Longhorn Man its all about the +6 inches Join Date: Jan 2001 Location: Hilliard Ohio Posts: 2,690	Welcome to the forums! While I have never bought one, nor even looked at one, I'm willing to bet a punch in the gut that the after market columns have the later style plug, which is flat. You can get am adapter from flat to horse shoe shaped connector at the dealer...although, I don't have the P/N here. Are you going after market just for a tilt, or you wanting the chrome finish, or what. If it is just for the tilt, you can get a van tilt that will look 99% original for WAY cheaper than that. (and look stock to all but the sharpest observer)

10-19-2004, 08:39 PM	#3
mbtoomey mbtoomey Join Date: Oct 2004 Location: Oak Ridge, TN Posts: 8	Tilt and chrome. I feel 90% sure it will work but just wanted another opinion.

10-19-2004, 08:45 PM	#4
Longhorn Man its all about the +6 inches Join Date: Jan 2001 Location: Hilliard Ohio Posts: 2,690	Yeah, the adapters are common...just ask what kind of turn signal harness plug does it have. I think that as long as the column is only equipped with the basics (no wiper controlls, stereo controlls, air bags, TV moniters...ect) and it is just a turn signal and 4 ways...it'll be the flat plug as on the 73 & up columns.

10-19-2004, 08:50 PM	#5
mbtoomey mbtoomey Join Date: Oct 2004 Location: Oak Ridge, TN Posts: 8	Thank-you for the information. I'm gonna keep it simple.

10-21-2004, 04:36 PM	#6
ronthet Registered User Join Date: Aug 2003 Location: Flower Mound Tx Posts: 18	I found Early classic Enterprises have original wiring harness etc with all original connectors. They may be pricing but you may want to check with them. I was checking on the rear harness for my 68. 49.00 from fire wall to rear then 79.00 on to the fixtures. They stated the bulb recep would come out of old base and in with the new. Just a thought. I had to call them as could not find these items listed on web site. 1.888 number in lower left hand corner



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.