Where to get a rubber bed mat ? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

RShaips · 10-22-2004, 11:33 AM

Does anybody offer a rubber bed mat for a 67 SWB ? I need one and can't find any vendors that sell them. I was told that a early 90's Ford SB mat can be cut down to fit pretty good. Anybody done this ? thanks

Customdeluxe20 · 10-22-2004, 12:02 PM

First time poster here. I got my LWB from Napa but had to cut me f-wells out since I have a 2 "" tub. If you take your time cutting only the front and back shoulnt be too difficult.

dallas71 · 10-22-2004, 12:30 PM

I have seen then at the tractor supply store (if you have one in your area...)

68C15 · 10-22-2004, 01:51 PM

like dallas said, get a universal one & start cutting.

RShaips · 10-22-2004, 01:54 PM

Customdeluxe was it made to fit your truck? What brand was it ? If I could find one where all I had to do was cut the front and back that would be nice.

**john** · 10-22-2004, 06:11 PM

They dont make one for 67-72, but the 73-87 ones fit without trimming. The only difference is the wheel wells are longer on them. The cutout is 3"-4" longer on the front side of the well. Most parts stores carry these. John

10-22-2004, 11:33 AM	#1
RShaips Senior Member Join Date: Jun 2002 Location: Augusta Missouri Posts: 804	Where to get a rubber bed mat ? Does anybody offer a rubber bed mat for a 67 SWB ? I need one and can't find any vendors that sell them. I was told that a early 90's Ford SB mat can be cut down to fit pretty good. Anybody done this ? thanks

10-22-2004, 12:30 PM	#3
dallas71 Registered User Join Date: Mar 2004 Location: Corinth,TX Posts: 444	I have seen then at the tractor supply store (if you have one in your area...) __________________ My 1966 LWB Truck My 1966 SWB Truck

10-22-2004, 01:51 PM	#4
68C15 blood type; Retumbo Join Date: Jan 2004 Location: next to my reloading bench Posts: 10,269	like dallas said, get a universal one & start cutting. __________________ Man rule #77...if you own a 67 stepside with a caddy 472 you will never be in danger of loosing you man card

10-22-2004, 06:11 PM	#6
john member #16 Join Date: Dec 1999 Location: Yuba City Ca. Posts: 3,618	They dont make one for 67-72, but the 73-87 ones fit without trimming. The only difference is the wheel wells are longer on them. The cutout is 3"-4" longer on the front side of the well. Most parts stores carry these. John __________________ john http://67-72chevytrucks.com/vboard/showgroups.php board vendors http://www.flickr.com/photos/1745471...7602865984234/

10-22-2004, 12:02 PM	#2
Customdeluxe20 Registered User Join Date: May 2004 Location: Stevens PA Posts: 1	First time poster here. I got my LWB from Napa but had to cut me f-wells out since I have a 2 "" tub. If you take your time cutting only the front and back shoulnt be too difficult.

10-22-2004, 01:54 PM	#5
RShaips Senior Member Join Date: Jun 2002 Location: Augusta Missouri Posts: 804	Customdeluxe was it made to fit your truck? What brand was it ? If I could find one where all I had to do was cut the front and back that would be nice.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.