??? Autocad Template of 2600# 2500# - The 1947 - Present Chevrolet & GMC Truck Message Board Network

guitarornothin · 10-24-2004, 05:12 PM

It would be HELLA NICE if someone had a Autocad drawing, Template, of some Firestone 2500 -2600 Bag brackets,Because im going to make Custom Brackets,

You know what.

If you have any Drawing files in autocad email me, .......

....Thanks, Ryan

*Shane* · 10-24-2004, 05:17 PM

I would like to take a peep at these as well, that is if someone has them.

guitarornothin · 10-24-2004, 05:23 PM

Waiting........................

i just hope someone has them, or im gonna have to try and do them myself...

new at autocad, not "That good" .....YET!

Tx Firefighter · 10-24-2004, 06:04 PM

You could try this.....

www._make_templates_out_of_carbboard_.com

or

www._building_from_the_seat_of_your_pants_.com

Both of those have worked great for me in the past on similar projects.

guitarornothin · 10-25-2004, 09:26 PM

ttt, STILL waiting,

........................................

*Tanker350* · 10-25-2004, 09:28 PM

I'm a Drafter in AutoCADD, but I'm having surgery on my right hand within the day. Sorry it would end up being a couple months...Sorry

*Shane* · 10-25-2004, 09:28 PM

Your post got hijacked.

Tx Firefighter · 10-25-2004, 09:32 PM

The point I was trying to make, is sometimes it's much easier to just get under the truck with cardboard and scissors and make templates and build them.

I'm speaking from experience here. I've done a good bit of streetrod fabrication. None of it was ever done with a computer though. It always involved laying on my back under the truck.

*Shane* · 10-25-2004, 11:19 PM

Sure it may be easier to you, but that wasn't the question that was asked.

I too have done alot of fabrication (street rods and more) and I have found that the use of a Cad/Cam system is much easier and faster than poster board and scissors when one knows how to use it.

Not meant as a "flame" and I can appreciate your experience Firefighter, but Guitar ask a simple quesion about an ACAD file ... one that others, like myself, would also like answered.

Thus the reason for my "hijacked" comment. There were 5 replies to this post that had absolutely nothing to do with ACAD files. They only wasted time and space.

Again, not meant as a flame ... just my "take on things." Heck, I made my "first" bag templates from cardboard.

Tx Firefighter · 10-25-2004, 11:25 PM

Shane, no flame taken.

As a matter of fact, your point is right on. My reponse was not relevant to his request.

guitarornothin · 10-26-2004, 08:19 PM

thank you shane,

TTT, i think i might try! to draw one, but im new at it, but GOOD, but havent drawn ANYTHING to scale, I will ask my teacher about it tommaro, because my only access to the program is at school.

I have been trying to DL it via Ares, but with dialup its taking forEVER,...

anybody wanna really help me out with a copy of the cd, email me, .....

SHHHH!>>>>>>>..................

Thanks once again Shane.

TugOwar · 10-26-2004, 08:27 PM

Shane (Von Dutch) and TX Firefighter = Class

**raggedjim** · 10-26-2004, 08:44 PM

Guitar, it is good practice to draw everything at full scale in cad, it avoids confusion. This goes for mechanical drawings, not architectural drawings.

cableguy0 · 10-24-2004, 06:37 PM

those links arent real. tx i think your gonna have to give up with that most people dont seem to get it lol... what hes trying to say is to just jump into and go for it the worse you can do is screw it up and have to start over its only metal

cableguy0 · 10-24-2004, 06:49 PM

hmm i now look like a jackass because the post i responded to from saule was deleted. oh well guess it will help others figure it out

saulgoode · 10-24-2004, 06:59 PM

Haha, I wasn't thinkin and tried to get those links to work. I didn't think about what they said. I guess that's what I get for being an aggie.

Saulgoode

cableguy0 · 10-24-2004, 07:20 PM

lol its ok i have done it b4 myself. all it takes is a little brain fart

10-24-2004, 05:12 PM	#1
guitarornothin RUNN over AGAIN!!! Join Date: Jun 2003 Location: Big Spring, Texas Posts: 505	??? Autocad Template of 2600# 2500# It would be HELLA NICE if someone had a Autocad drawing, Template, of some Firestone 2500 -2600 Bag brackets,Because im going to make Custom Brackets, You know what. If you have any Drawing files in autocad email me, ....... ....Thanks, Ryan __________________ 67-72 TRUCKS ROCK 70 SWB shaved and a 72 front clip.and a poly tank. Peep mirrors and a BIG BLOCK 468 in the making. XNXNXNXNXNXNXNXNXNXNX ,/. EMAIL ME HERE!, Dont pm me please ,/.

10-24-2004, 05:23 PM	#3
guitarornothin RUNN over AGAIN!!! Join Date: Jun 2003 Location: Big Spring, Texas Posts: 505	Waiting........................ i just hope someone has them, or im gonna have to try and do them myself... new at autocad, not "That good" .....YET! __________________ 67-72 TRUCKS ROCK 70 SWB shaved and a 72 front clip.and a poly tank. Peep mirrors and a BIG BLOCK 468 in the making. XNXNXNXNXNXNXNXNXNXNX ,/. EMAIL ME HERE!, Dont pm me please ,/.

10-24-2004, 06:04 PM	#4
Tx Firefighter Watch out for your cornhole ! Join Date: Jun 2003 Location: Azle, Texas Posts: 14,162	You could try this..... www._make_templates_out_of_carbboard_.com or www._building_from_the_seat_of_your_pants_.com Both of those have worked great for me in the past on similar projects. __________________ I'm on the Instagram- @Gearhead_Kevin

10-25-2004, 09:26 PM	#5
guitarornothin RUNN over AGAIN!!! Join Date: Jun 2003 Location: Big Spring, Texas Posts: 505	ttt, STILL waiting, ........................................ __________________ 67-72 TRUCKS ROCK 70 SWB shaved and a 72 front clip.and a poly tank. Peep mirrors and a BIG BLOCK 468 in the making. XNXNXNXNXNXNXNXNXNXNX ,/. EMAIL ME HERE!, Dont pm me please ,/.

10-25-2004, 09:32 PM	#8
Tx Firefighter Watch out for your cornhole ! Join Date: Jun 2003 Location: Azle, Texas Posts: 14,162	The point I was trying to make, is sometimes it's much easier to just get under the truck with cardboard and scissors and make templates and build them. I'm speaking from experience here. I've done a good bit of streetrod fabrication. None of it was ever done with a computer though. It always involved laying on my back under the truck. __________________ I'm on the Instagram- @Gearhead_Kevin

10-24-2004, 05:17 PM	#2
Shane Account Suspended Join Date: Jun 2000 Location: over yonder Posts: 14,270	I would like to take a peep at these as well, that is if someone has them.

10-25-2004, 09:28 PM	#6
Tanker350 Account Suspended Join Date: Dec 2003 Location: Palm Desert, Ca Posts: 410	I'm a Drafter in AutoCADD, but I'm having surgery on my right hand within the day. Sorry it would end up being a couple months...Sorry

10-25-2004, 11:19 PM	#9
Shane Account Suspended Join Date: Jun 2000 Location: over yonder Posts: 14,270	Sure it may be easier to you, but that wasn't the question that was asked. I too have done alot of fabrication (street rods and more) and I have found that the use of a Cad/Cam system is much easier and faster than poster board and scissors when one knows how to use it. Not meant as a "flame" and I can appreciate your experience Firefighter, but Guitar ask a simple quesion about an ACAD file ... one that others, like myself, would also like answered. Thus the reason for my "hijacked" comment. There were 5 replies to this post that had absolutely nothing to do with ACAD files. They only wasted time and space. Again, not meant as a flame ... just my "take on things." Heck, I made my "first" bag templates from cardboard.

10-25-2004, 11:25 PM	#10
Tx Firefighter Watch out for your cornhole ! Join Date: Jun 2003 Location: Azle, Texas Posts: 14,162	Shane, no flame taken. As a matter of fact, your point is right on. My reponse was not relevant to his request. __________________ I'm on the Instagram- @Gearhead_Kevin

10-26-2004, 08:19 PM	#11
guitarornothin RUNN over AGAIN!!! Join Date: Jun 2003 Location: Big Spring, Texas Posts: 505	thank you shane, TTT, i think i might try! to draw one, but im new at it, but GOOD, but havent drawn ANYTHING to scale, I will ask my teacher about it tommaro, because my only access to the program is at school. I have been trying to DL it via Ares, but with dialup its taking forEVER,... anybody wanna really help me out with a copy of the cd, email me, ..... SHHHH!>>>>>>>.................. Thanks once again Shane. __________________ 67-72 TRUCKS ROCK 70 SWB shaved and a 72 front clip.and a poly tank. Peep mirrors and a BIG BLOCK 468 in the making. XNXNXNXNXNXNXNXNXNXNX ,/. EMAIL ME HERE!, Dont pm me please ,/.

10-26-2004, 08:27 PM	#12
TugOwar Registered User Join Date: Sep 2004 Location: Pleasanton, TX Posts: 1,723	Shane (Von Dutch) and TX Firefighter = Class

10-26-2004, 08:44 PM	#13
raggedjim Senior Member Join Date: Jun 2002 Location: Murray, Kentucky Posts: 3,476	Guitar, it is good practice to draw everything at full scale in cad, it avoids confusion. This goes for mechanical drawings, not architectural drawings. __________________ Roger '68 Short step - https://67-72chevytrucks.com/vboard/...d.php?t=849675 '69 ('70?) 2wd Blazer '70 GMC Jimmy 2wd '73 Firebird - https://67-72chevytrucks.com/vboard/...d.php?t=853203

10-24-2004, 06:37 PM	#14
cableguy0 Senior Member Join Date: Apr 2000 Location: Delta,Pa Posts: 14,948	those links arent real. tx i think your gonna have to give up with that most people dont seem to get it lol... what hes trying to say is to just jump into and go for it the worse you can do is screw it up and have to start over its only metal __________________ Owner of North Point Car Care in Dundalk Md. We specialize in custom exhaust on both modern and classic vehicles. We are a full service auto shop from classics to modern vehicles. Feel free to contact me with questions. I will give a 10% discount to any board member.

10-24-2004, 06:49 PM	#15
cableguy0 Senior Member Join Date: Apr 2000 Location: Delta,Pa Posts: 14,948	hmm i now look like a jackass because the post i responded to from saule was deleted. oh well guess it will help others figure it out __________________ Owner of North Point Car Care in Dundalk Md. We specialize in custom exhaust on both modern and classic vehicles. We are a full service auto shop from classics to modern vehicles. Feel free to contact me with questions. I will give a 10% discount to any board member.

10-24-2004, 06:59 PM	#16
saulgoode Registered User Join Date: Dec 2003 Location: Houston Posts: 388	Haha, I wasn't thinkin and tried to get those links to work. I didn't think about what they said. I guess that's what I get for being an aggie. Saulgoode



Register or Log In To remove these advertisements.

10-24-2004, 07:20 PM	#17
cableguy0 Senior Member Join Date: Apr 2000 Location: Delta,Pa Posts: 14,948	lol its ok i have done it b4 myself. all it takes is a little brain fart __________________ Owner of North Point Car Care in Dundalk Md. We specialize in custom exhaust on both modern and classic vehicles. We are a full service auto shop from classics to modern vehicles. Feel free to contact me with questions. I will give a 10% discount to any board member.

Register or Log In To remove these advertisements.