|
|
|
11-01-2004, 08:37 PM
|
#1 |
|
someday it will be done!
Join Date: Sep 2004
Location: Lloydminster,AB. Canada
Posts: 1,620
|
"A" pillar question
I tried this in paint and body with no luck so I'll try it here.
I'm in the process of cutting out my front floor,front cab support,and kick panel.My A pillar is still in good shape but I can't get the panels sandwiched in behind the pillar loose.The pillar has that backing piece on it that I thought was just spot welded together but evidently something else is holding it.I don't really wanna replace the pillar just for this.Any advice?  Here's a picture to make it alittle more clear... 
__________________
'72 C-10 Proud owner of a million new and used pieces that used to be and will once again be(god willing) a testament to the term "they don't build em like that anymore.    '80 LWB 2wd beater '67 GMC long fleet (cab donor) '66 long step (parked till it's turn comes around) '65 short step (parts truck that will donate it's bed and possibly frame to the '66) '06 Grand Prix wife's car (she hardly lets me touch it) my pics |
|
|
|
11-01-2004, 08:59 PM
|
#2 |
|
Senior Member
Join Date: Jul 2001
Location: Muskegon,MI,USA
Posts: 6,026
|
All three layers are spotwelded together and they can be difficult to separate. If you can locate the spots you can drill them out.
Jim |
|
|
|
|
11-01-2004, 09:03 PM
|
#3 |
|
someday it will be done!
Join Date: Sep 2004
Location: Lloydminster,AB. Canada
Posts: 1,620
|
thx Jim I was afraid of that
 .
__________________
'72 C-10 Proud owner of a million new and used pieces that used to be and will once again be(god willing) a testament to the term "they don't build em like that anymore. '80 LWB 2wd beater '67 GMC long fleet (cab donor) '66 long step (parked till it's turn comes around) '65 short step (parts truck that will donate it's bed and possibly frame to the '66) '06 Grand Prix wife's car (she hardly lets me touch it) my pics |
|
|
|
 |
| Bookmarks |
|
|
Hybrid Mode
