Bug Shield - The 1947 - Present Chevrolet & GMC Truck Message Board Network

palallin · 11-04-2004, 01:06 PM

Who carries a decent bug shield that fits our trucks? I used to buy from Whitney, but they don't stoop to carrying stuff for vehicles that old anymore. Too much money to be made in stereos for ricers, I guess.

Thanks!

c10crazy · 11-04-2004, 01:10 PM

There is no such thing as a decent bugshield on our trucks. In my humble opinion they look goofy on a classic truck.

sactoC10 · 11-04-2004, 01:50 PM

Ditto c10crazy...

The PO had one on mine, which when removed (prior to my getting it) left six big ugly holes in my grill surround. When I've seen them, they are simply large (like 5-6") straight up and not very attractive. If you have some major bugs to protect your truck from, there's got to be a better way, IMHO.

JT

**CPNE** · 11-04-2004, 02:07 PM

I think slammed trucks are ugly too but I don't make it a point to state that in every post that inquires about bags, c-notches, adjustable tracking arms, etc.

(I haven't got enough free time

)

To address the question, I have not seen one sold new that is contoured for the hood angles, but that does not mean they aren't. A user, I believe 1969GMC, had a used one he was selling a while back. It was contoured properly.

fire235 · 11-04-2004, 02:16 PM

LMC sells them. THey look ok if you like bug shields.

1969 GMC · 11-04-2004, 02:59 PM

I took one off of my truck that the p/o had installed. It is in good shape, has 2 large Allis Chalmers stickers on it (bet ya cant tell where my old farm truck is from, eh :p ), and it has a lot of little superficial cracks in it. It has a bend in the middle and is contoured to the leading edge of the hood. I had it on the parts board for free, but I won't ship it. If you have any relatives in Ohio that could hold it for you, or if you are coming to OH anytime soon, its yours.
Here is a pic of it on my truck:

sorry i dont have a better one

sactoC10 · 11-04-2004, 03:36 PM

A clear one would be better than a tinted one, again in my opinion. Still would be hard (for me) to drill the holes in the grill for the installation. If there were such a thing as a contoured one, then I'd support that over the eighties style flat ones. Since I've never seen a contoured one on one of our trucks, judgement and comments are with-held!

fire235 · 11-04-2004, 04:21 PM

Just looked in LMC and the ones that sell seem to be pretty well contoured with the hood. Didn't look to bad. Also stated that NO drilling was required for install.

useRc10 · 11-04-2004, 06:03 PM

may dad had a bra made for his truck...i think i posted pics before but i'll try to put them up again when i get home

1969 GMC · 11-04-2004, 06:51 PM

Quote:

Originally Posted by fire235

Just looked in LMC and the ones that sell seem to be pretty well contoured with the hood. Didn't look to bad. Also stated that NO drilling was required for install.

Perhaps on the newer ones...but mine had been attached to the hood with screws, not the grille. They attached to the underside "framework" of the hood, so it doesn't leave any nasty visible holes. It is a Deflecta-Shield brand, I am guessing its pretty old.
Anyway, if anyone wants it, they are free to stop by!

useRc10 · 11-04-2004, 09:47 PM

pic isnt very good but hopefully i can get some better ones tommorow

Bobalouie · 11-05-2004, 10:14 AM

There is a company called invinca shield that sells a clear urethane film that you stick to your hood. I am not describing it very well, so check out the site. I am going to use it on my truck when the time comes.

http://www.invinca-shield.com/main.htm

toddtheodd · 11-07-2004, 02:07 PM

With the way the hood is shaped on my 72 I figured I didn't need one. I mean seriously, the bug shield is a 90 degree angle and the hood is an 85 degree angle. Not like the bug shield is going to help much more. It seems like only the bigger bugs hit my windshield anyway.
Todd

Solver · 11-07-2004, 05:49 PM

I run bug shields on a couple of my trucks.
I don't want them so much for the bugs as the rock chips and debris always flying into the front of my truck.
I have had to replace a couple of them also from taking a hit and cracking. I don't think they are the prettiest thing but they do protect the front edge of the hood and cheaper to replace shield than fix dents and repaint hood!
In the pic the red ,green and blue all have shields

sactoC10 · 11-07-2004, 11:38 PM

useRc10,

Doesn't look all that bad. If these were still a fad, maybe someone would be making them.

Peregrine · 11-08-2004, 12:18 AM

If I drove by and saw all those trucks in a row my car would come to a screeching halt and you'd look out your window and see me skipping towards them.

Solver · 11-08-2004, 12:22 AM

even if they had bug shields on the front peregrine? LOL

glock35ipsc · 11-08-2004, 12:24 AM

Quote:

Originally Posted by Peregrine

If I drove by and saw all those trucks in a row my car would come to a screeching halt and you'd look out your window and see me skipping towards them.

Same here, with checkbook in hand!!

R 78 PROJECT · 11-08-2004, 03:45 PM

Quote:

Originally Posted by glock35ipsc

Same here, with checkbook in hand!!

You also may want to wave it up high or the other hand may be picking out the buckshot from your rear,lol lol

Peregrine · 11-08-2004, 12:28 AM

Well, I'd have that hazy "I'm in love" vision, so I probably would let them slide. And about the checkbook, I'd have to disagree. I feel guilty driving the nice truck that I do and knowing that I didn't do any of the work to it. If I only had 10 grand......

avejoe · 11-08-2004, 01:29 AM

My truck does not go fast enough to splat the bugs- they just bounce off and keep flying.

bouncytruck · 11-08-2004, 01:04 PM

I've got a smoked one I took off my '69. It says "Moore Tiling" on it. It is free to anyone that wants to pick it up.

petty · 09-26-2009, 05:47 AM

Quote:

Originally Posted by palallin

Who carries a decent bug shields that fits our trucks? I used to buy from Whitney, but they don't stoop to carrying stuff for vehicles that old anymore. Too much money to be made in stereos for ricers, I guess.

Thanks!

try out on eBay or at carstuff. These two are popular when it comes to bug shield and interior stuffs.

11-04-2004, 01:06 PM	#1
palallin Registered User Join Date: Jul 2002 Location: St. James, MO Posts: 1,238	Bug Shield Who carries a decent bug shield that fits our trucks? I used to buy from Whitney, but they don't stoop to carrying stuff for vehicles that old anymore. Too much money to be made in stereos for ricers, I guess. Thanks! __________________ '69 Longstep K-10: 327/SM465/T-221/Closed Knuckle Dana44/12-bolt.

11-04-2004, 01:10 PM	#2
c10crazy Like a Rock! Join Date: May 2002 Location: USA Posts: 1,092	There is no such thing as a decent bugshield on our trucks. In my humble opinion they look goofy on a classic truck. __________________ 69 LWB Runs great - work in progress Mess with me and you mess with the whole trailer park!

11-04-2004, 01:50 PM	#3
sactoC10 71 DELUX Join Date: Sep 2003 Location: Northern CA / Sac Posts: 1,055	Ditto c10crazy... The PO had one on mine, which when removed (prior to my getting it) left six big ugly holes in my grill surround. When I've seen them, they are simply large (like 5-6") straight up and not very attractive. If you have some major bugs to protect your truck from, there's got to be a better way, IMHO. JT __________________ 5/4 drop LWB wood bed - 15x8 front 235/60 - 15x10 rear 295/50 2003 FORD Escape 1998 Honda VTR1000

11-04-2004, 02:07 PM	#4
CPNE Resident Curmudgeon Join Date: Dec 1999 Location: NH Posts: 6,662	I think slammed trucks are ugly too but I don't make it a point to state that in every post that inquires about bags, c-notches, adjustable tracking arms, etc. (I haven't got enough free time ) To address the question, I have not seen one sold new that is contoured for the hood angles, but that does not mean they aren't. A user, I believe 1969GMC, had a used one he was selling a while back. It was contoured properly. __________________ Currently on or near the homestead: 67 Chevy SWB 2WD stepside 350/3 on tree (Pat's) 67 GMC SWB 2WD Fleet 402/auto (Brian's under construction) 67 Chevy 3/4 ton 2WD 402/auto (Business Hauler) 67 Chevy 1 ton dually 2WD 396/4 speed (Former business hauler, Needs TLC) 68 Chevy 1/2 ton Suburban 2WD 250 six/3 on tree (Brian's Needs TLC) 70 Chevy 3/4 ton 4WD 350/4 speed (Pat's - Disguised as a 68 GMC) 71 Chevy SWB stepside (Crushed by tree - parts donor) 72 Chevy 3/4 ton 4WD (Parts donor) 72 Chevy 3/4 ton 4WD Suburban (Parts Donor) 72 GMC 3/4 ton 4WD 292 six/4 speed (Mine - Disguised as a 67 GMC) 81 GMC 4WD Dually Dump Body 350/4 speed (Business Hauler) 82 Camaro Z/28 355/Super T-10 (Pat's toy) 93 Caprice 9C1 (Brian's Cop Car) 02 Toyota Camry (Reliable but a souless steel and plastic hulk) 2011 2SS RS Camaro M6 Factory Hurst Shifter Maybe I need to sell some of this crap Yet another Bozo with a sawz-all

11-04-2004, 02:59 PM	#6
1969 GMC Registered User Join Date: Feb 2003 Location: The Rubber City Posts: 5,498	I took one off of my truck that the p/o had installed. It is in good shape, has 2 large Allis Chalmers stickers on it (bet ya cant tell where my old farm truck is from, eh :p ), and it has a lot of little superficial cracks in it. It has a bend in the middle and is contoured to the leading edge of the hood. I had it on the parts board for free, but I won't ship it. If you have any relatives in Ohio that could hold it for you, or if you are coming to OH anytime soon, its yours. Here is a pic of it on my truck: sorry i dont have a better one __________________ 1969 GMC K2500 1996 Honda Accord 2007 Kawasaki KLR 650

11-04-2004, 02:16 PM	#5
fire235 Registered User Join Date: Oct 2004 Location: East Texas Posts: 76	LMC sells them. THey look ok if you like bug shields.

11-04-2004, 03:36 PM	#7
sactoC10 71 DELUX Join Date: Sep 2003 Location: Northern CA / Sac Posts: 1,055	A clear one would be better than a tinted one, again in my opinion. Still would be hard (for me) to drill the holes in the grill for the installation. If there were such a thing as a contoured one, then I'd support that over the eighties style flat ones. Since I've never seen a contoured one on one of our trucks, judgement and comments are with-held! __________________ 5/4 drop LWB wood bed - 15x8 front 235/60 - 15x10 rear 295/50 2003 FORD Escape 1998 Honda VTR1000

11-04-2004, 04:21 PM	#8
fire235 Registered User Join Date: Oct 2004 Location: East Texas Posts: 76	Just looked in LMC and the ones that sell seem to be pretty well contoured with the hood. Didn't look to bad. Also stated that NO drilling was required for install.

11-04-2004, 06:03 PM	#9
useRc10 Registered User Join Date: Feb 2001 Location: Mechanicsville, VA, 23111 Posts: 1,138	may dad had a bra made for his truck...i think i posted pics before but i'll try to put them up again when i get home __________________ -'02 Chevy Avalanche, 5.3L, 4x4... needing a small lift and bigger tires -'72 Chevy C-10(350, bored 60 over)dual flowmasters, 3 on the tree -'85 K5 Blazer,305 NO MORE...350 is in,2" lift,33" Mickey Thompson Baja Claw Radials -dads '70 burb (red, 5-7 drop, 350...) www.geocities.com/userc10/truckhome.html AIM: Auntjoedadda

11-04-2004, 09:47 PM	#11
useRc10 Registered User Join Date: Feb 2001 Location: Mechanicsville, VA, 23111 Posts: 1,138	pic isnt very good but hopefully i can get some better ones tommorow Attached Images __________________ -'02 Chevy Avalanche, 5.3L, 4x4... needing a small lift and bigger tires -'72 Chevy C-10(350, bored 60 over)dual flowmasters, 3 on the tree -'85 K5 Blazer,305 NO MORE...350 is in,2" lift,33" Mickey Thompson Baja Claw Radials -dads '70 burb (red, 5-7 drop, 350...) www.geocities.com/userc10/truckhome.html AIM: Auntjoedadda

11-05-2004, 10:14 AM	#12
Bobalouie Fetzer Valve Technician Join Date: Jun 2003 Location: Stillwater, OK Posts: 205	There is a company called invinca shield that sells a clear urethane film that you stick to your hood. I am not describing it very well, so check out the site. I am going to use it on my truck when the time comes. http://www.invinca-shield.com/main.htm __________________ 1972 Chevy K10 SWB

11-07-2004, 02:07 PM	#13
toddtheodd The oddest Todd around Join Date: May 2004 Location: Miami, Florida Posts: 1,418	With the way the hood is shaped on my 72 I figured I didn't need one. I mean seriously, the bug shield is a 90 degree angle and the hood is an 85 degree angle. Not like the bug shield is going to help much more. It seems like only the bigger bugs hit my windshield anyway. Todd

11-07-2004, 05:49 PM	#14
Solver Registered User Join Date: May 2000 Location: Storm Lake, Ia Posts: 1,449	I run bug shields on a couple of my trucks. I don't want them so much for the bugs as the rock chips and debris always flying into the front of my truck. I have had to replace a couple of them also from taking a hit and cracking. I don't think they are the prettiest thing but they do protect the front edge of the hood and cheaper to replace shield than fix dents and repaint hood! In the pic the red ,green and blue all have shields Attached Images __________________ 1972 Cheyenne Super 20 LWB-Blue 1972 Cheyenne Super 10 LWB-Black 1972 Cheyenne Super 10 LWB-Red 1972 Cheyenne Super 10 LWB-green 1972 GMC 4x4 LWB-White 1971 Cheyenne 10 LWB-Ochre 1971 Cheyenne 20 Longhorn-Copper 1971 Cheyenne 20 Longhorn-Black 1969 Custom 10 LWB-lt blue 1968 GMC 3/4 ton-green 1968 1/2 ton swb stepside-silver 1967 Chevrolet CST 10 LWB-green 1967 Chevrolet custom 20 LWB-Maroon

11-07-2004, 11:38 PM	#15
sactoC10 71 DELUX Join Date: Sep 2003 Location: Northern CA / Sac Posts: 1,055	useRc10, Doesn't look all that bad. If these were still a fad, maybe someone would be making them. __________________ 5/4 drop LWB wood bed - 15x8 front 235/60 - 15x10 rear 295/50 2003 FORD Escape 1998 Honda VTR1000

11-08-2004, 12:18 AM	#16
Peregrine Registered User Join Date: Sep 2004 Location: Louisville, Ky Posts: 329	If I drove by and saw all those trucks in a row my car would come to a screeching halt and you'd look out your window and see me skipping towards them. __________________ Brian 72 C10 longbed 350/th400 Let the world change you and you will change the world.



Register or Log In To remove these advertisements.

11-08-2004, 12:22 AM	#17
Solver Registered User Join Date: May 2000 Location: Storm Lake, Ia Posts: 1,449	even if they had bug shields on the front peregrine? LOL __________________ 1972 Cheyenne Super 20 LWB-Blue 1972 Cheyenne Super 10 LWB-Black 1972 Cheyenne Super 10 LWB-Red 1972 Cheyenne Super 10 LWB-green 1972 GMC 4x4 LWB-White 1971 Cheyenne 10 LWB-Ochre 1971 Cheyenne 20 Longhorn-Copper 1971 Cheyenne 20 Longhorn-Black 1969 Custom 10 LWB-lt blue 1968 GMC 3/4 ton-green 1968 1/2 ton swb stepside-silver 1967 Chevrolet CST 10 LWB-green 1967 Chevrolet custom 20 LWB-Maroon

11-08-2004, 12:28 AM	#20
Peregrine Registered User Join Date: Sep 2004 Location: Louisville, Ky Posts: 329	Well, I'd have that hazy "I'm in love" vision, so I probably would let them slide. And about the checkbook, I'd have to disagree. I feel guilty driving the nice truck that I do and knowing that I didn't do any of the work to it. If I only had 10 grand...... __________________ Brian 72 C10 longbed 350/th400 Let the world change you and you will change the world.

11-08-2004, 01:29 AM	#21
avejoe Custer had a plan too. Join Date: Dec 2003 Location: No. California Posts: 344	My truck does not go fast enough to splat the bugs- they just bounce off and keep flying. __________________ 72 K15 GMC (aka Big White) Performance Rockers, Cab Corners, and Floors Fossil Fuel Glutton Neighborhood Nuisance 98 BMW 540i for Speed (Sold ) 05 Subaru Outback for mileage

11-08-2004, 01:04 PM	#22
bouncytruck SKINNY TIRES RULE! Join Date: Sep 2001 Location: Bothell, WA Posts: 11,038	I've got a smoked one I took off my '69. It says "Moore Tiling" on it. It is free to anyone that wants to pick it up. __________________ bouncytruck 1972 K5 The Hauler 1994 K1500 Suburban The Daily2010 Kia Soul Wife's Ride2014 Fiat 500L

Register or Log In To remove these advertisements.