van tilt Question - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**tnblazerk5** · 11-06-2004, 11:16 PM

i have a van tilt i am going to put in a 67 my Question is can i move the whole tilt closer to the dash to give me more arm,belly, room

Longhorn Man · 11-06-2004, 11:32 PM

To a degree...yes you can. I did that in the Longhorn. I feel the wheel is too close in stock configuration myself.
Don't forget on the van tilt, you'll need the intermediate shaft off a late '68 - '72 truck.

Solver · 11-06-2004, 11:38 PM

I just posted earlier about installing 2 tilts today
if you look at the pics they are both installed about 11/2 to 1 3/4" closer to dash than factory.keep in mind that if you do that with a van tilt you may want to adjust where you mount the neutral saftey switch. Maybe 6" up instead of factory distance.

**tnblazerk5** · 11-06-2004, 11:49 PM

Quote:

Originally Posted by Solver

I just posted earlier about installing 2 tilts today
if you look at the pics they are both installed about 11/2 to 1 3/4" closer to dash than factory.keep in mind that if you do that with a van tilt you may want to adjust where you mount the neutral saftey switch. Maybe 6" up instead of factory distance.

yes i looked at them and they look really good in there too !!!!!!!

my neutral switch is on the tranny i put it there when i put a turbo 350 in it about a year ago !!

is there any thing else i need to do ?

Solver · 11-07-2004, 12:55 AM

Just get the column in there and then push in to collapse the intermediate shaft to the position you want it.
I pulled the intermediate shaft completely out to remove old column so when I collapsed the shaft I greased it a little and made sure it slide back and forth so once the column is back in and the rag joint is bolted back together you can push and pull till you get it just right.

**tnblazerk5** · 11-06-2004, 11:44 PM

my 67 already has the correct intermediate shaft on it i put it there when i put the power steering on it about 20 years ago

thanks for the tip though i had to go look at it to make sure i put it in there

just to make sure!!!!! how much more room will i have ? and what all will i have to do to move it closer ?

11-06-2004, 11:16 PM	#1
tnblazerk5 User #12137 Join Date: Apr 2004 Location: kingsport,upper east tenn Posts: 11,598	van tilt Question i have a van tilt i am going to put in a 67 my Question is can i move the whole tilt closer to the dash to give me more arm,belly, room

11-06-2004, 11:38 PM	#3
Solver Registered User Join Date: May 2000 Location: Storm Lake, Ia Posts: 1,449	I just posted earlier about installing 2 tilts today if you look at the pics they are both installed about 11/2 to 1 3/4" closer to dash than factory.keep in mind that if you do that with a van tilt you may want to adjust where you mount the neutral saftey switch. Maybe 6" up instead of factory distance. __________________ 1972 Cheyenne Super 20 LWB-Blue 1972 Cheyenne Super 10 LWB-Black 1972 Cheyenne Super 10 LWB-Red 1972 Cheyenne Super 10 LWB-green 1972 GMC 4x4 LWB-White 1971 Cheyenne 10 LWB-Ochre 1971 Cheyenne 20 Longhorn-Copper 1971 Cheyenne 20 Longhorn-Black 1969 Custom 10 LWB-lt blue 1968 GMC 3/4 ton-green 1968 1/2 ton swb stepside-silver 1967 Chevrolet CST 10 LWB-green 1967 Chevrolet custom 20 LWB-Maroon

11-07-2004, 12:55 AM	#5
Solver Registered User Join Date: May 2000 Location: Storm Lake, Ia Posts: 1,449	Just get the column in there and then push in to collapse the intermediate shaft to the position you want it. I pulled the intermediate shaft completely out to remove old column so when I collapsed the shaft I greased it a little and made sure it slide back and forth so once the column is back in and the rag joint is bolted back together you can push and pull till you get it just right. __________________ 1972 Cheyenne Super 20 LWB-Blue 1972 Cheyenne Super 10 LWB-Black 1972 Cheyenne Super 10 LWB-Red 1972 Cheyenne Super 10 LWB-green 1972 GMC 4x4 LWB-White 1971 Cheyenne 10 LWB-Ochre 1971 Cheyenne 20 Longhorn-Copper 1971 Cheyenne 20 Longhorn-Black 1969 Custom 10 LWB-lt blue 1968 GMC 3/4 ton-green 1968 1/2 ton swb stepside-silver 1967 Chevrolet CST 10 LWB-green 1967 Chevrolet custom 20 LWB-Maroon

11-06-2004, 11:32 PM	#2
Longhorn Man its all about the +6 inches Join Date: Jan 2001 Location: Hilliard Ohio Posts: 2,690	To a degree...yes you can. I did that in the Longhorn. I feel the wheel is too close in stock configuration myself. Don't forget on the van tilt, you'll need the intermediate shaft off a late '68 - '72 truck.

11-06-2004, 11:44 PM	#6
tnblazerk5 User #12137 Join Date: Apr 2004 Location: kingsport,upper east tenn Posts: 11,598	my 67 already has the correct intermediate shaft on it i put it there when i put the power steering on it about 20 years ago thanks for the tip though i had to go look at it to make sure i put it in there just to make sure!!!!! how much more room will i have ? and what all will i have to do to move it closer ?



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.