in need of some pictures PLEASE - The 1947 - Present Chevrolet & GMC Truck Message Board Network

landon4421 · 11-10-2004, 09:26 PM

I am getting ready to put all my brake lines on to my frame. I got me some of them SS ones

Anywho I was wondering if any of you guys have pictures, that mabe you could post up for me

looking for a picture of the brake lines, where they all join togeather on the drivers side frame rail

you know right next to the power steering pump, on the frame. Also one from the pass side back where the line comes off the frame and goto the rear end. Right where the bracket is

I am looking for the pictures so I know what parts to buy next week !

Thanks In advance Landon

landon4421 · 11-10-2004, 09:30 PM

I almost forget, I am working on a 1972 swb c-10 4x4

I have the dana 60 front end and the GM 14 bolt rear :p and Power brakes

**Classic Heartbeat** · 11-10-2004, 09:40 PM

Here you go. WES

landon4421 · 11-10-2004, 10:03 PM

Thanks wes

You wouldnt happen to have a picture of the rear brake lines ? Right where the line comes off the frame and heads to the rear end. There is a bracket there where the brake lines go from hard line to pressure hose (to axle) then back to hard lines out to the brakes :p

Thanks again Landon

LUV2XCLR8 · 11-10-2004, 10:23 PM

Lots Of Pic's Of "gq" On My Sig, Might Have A Few Wes Didn't Post.

**Classic Heartbeat** · 11-10-2004, 11:45 PM

Sorry, I went out to dinner...lol Here you go. The picture with the bracket that hangs below the fram is actually a 3/4 ton 4X4. The other two are 1/2 ton 4X4.... WES

11-10-2004, 09:26 PM	#1
landon4421 Life is Good ! Join Date: Mar 2002 Location: Hollister, Ca. Posts: 1,992	in need of some pictures PLEASE I am getting ready to put all my brake lines on to my frame. I got me some of them SS ones Anywho I was wondering if any of you guys have pictures, that mabe you could post up for me looking for a picture of the brake lines, where they all join togeather on the drivers side frame rail you know right next to the power steering pump, on the frame. Also one from the pass side back where the line comes off the frame and goto the rear end. Right where the bracket is I am looking for the pictures so I know what parts to buy next week ! Thanks In advance Landon __________________ '72 Chevy C10 4x4 shortbed "Project" '71 Chevy C10 2wd longbed "partsrunner" '91 Chevy Burb 4x4 "kidrunner" '14 Honda Accord Sport "commuter"

11-10-2004, 09:30 PM	#2
landon4421 Life is Good ! Join Date: Mar 2002 Location: Hollister, Ca. Posts: 1,992	I almost forget, I am working on a 1972 swb c-10 4x4 I have the dana 60 front end and the GM 14 bolt rear :p and Power brakes __________________ '72 Chevy C10 4x4 shortbed "Project" '71 Chevy C10 2wd longbed "partsrunner" '91 Chevy Burb 4x4 "kidrunner" '14 Honda Accord Sport "commuter"

11-10-2004, 09:40 PM	#3
Classic Heartbeat Project Junkie! Fishing Poor!! Join Date: Dec 1999 Location: Olympia,Wa. 98512 Posts: 10,768	Here you go. WES Last edited by Classic Heartbeat; 10-04-2007 at 07:29 PM.

11-10-2004, 10:03 PM	#4
landon4421 Life is Good ! Join Date: Mar 2002 Location: Hollister, Ca. Posts: 1,992	Thanks wes You wouldnt happen to have a picture of the rear brake lines ? Right where the line comes off the frame and heads to the rear end. There is a bracket there where the brake lines go from hard line to pressure hose (to axle) then back to hard lines out to the brakes :p Thanks again Landon __________________ '72 Chevy C10 4x4 shortbed "Project" '71 Chevy C10 2wd longbed "partsrunner" '91 Chevy Burb 4x4 "kidrunner" '14 Honda Accord Sport "commuter"

11-10-2004, 10:23 PM	#5
LUV2XCLR8 The LuvShack Garage Join Date: Jan 2004 Location: Maple Grove, TN (West Side) Posts: 30,484	Lots Of Pic's Of "gq" On My Sig, Might Have A Few Wes Didn't Post. __________________ Owner/Op: "TN Classic Transport Carriers" The Toy: "Square Vette" 72 Hybrid Blazer Toy Barn: "LuvShack" 40 x 60 x 20 Shop Tow Piggy:"Maddy" 88 Silverado 3500 Hauler: "Feathers" 14 Aluma 8218T

11-10-2004, 11:45 PM	#6
Classic Heartbeat Project Junkie! Fishing Poor!! Join Date: Dec 1999 Location: Olympia,Wa. 98512 Posts: 10,768	Sorry, I went out to dinner...lol Here you go. The picture with the bracket that hangs below the fram is actually a 3/4 ton 4X4. The other two are 1/2 ton 4X4.... WES Last edited by Classic Heartbeat; 10-04-2007 at 07:29 PM.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.