Need a pic of power steering pump w/brackets installed - The 1947 - Present Chevrolet & GMC Truck Message Board Network

jakeslim · 11-11-2004, 12:08 AM

I am missing a bracket for my power steering pump. I have the pump, its cradled in a big bracket, but i'm sure there is another bracket I'm missing(?). I posted on here looking for one, but no one was sure what I needed. I figure if I can get a pic, then I can ask for the right part.

thanks,
jakeslim

Longhorn Man · 11-11-2004, 12:35 AM

What year? what engine? What size pump? What side is the alt on?

Fred T · 11-11-2004, 12:52 AM

Here's a shot of the bracket on my 69, the pump bracket bolts to this one.

Longhorn Man · 11-11-2004, 12:54 AM

That is the small block with the short water pump...as stock (alt on drivers side)

jakeslim · 11-11-2004, 12:58 AM

Quote:

Originally Posted by Longhorn Man

That is the small block with the short water pump...as stock (alt on drivers side)

Yep, thats what i got...short water pump , alt on drivers side, 350...and thats the bracket I need. I will reference that pic in my quest. Is that bolted on to your motor mount?

thanks for the help,
jakeslim

Longhorn Man · 11-11-2004, 01:02 AM

Yup, bols to the motor mount, and that is where they commonly break too.

Wootdog · 11-11-2004, 08:20 PM

I have a small block. No pics. My power steering pump bolts on the left side. It actually has a bolt with a standoff and washers. Kerry

Sweet72 · 11-11-2004, 08:42 PM

Nice looking engine Fred T. There should be a cast iron cradle type bracket that mounts in front of the sheet metal bracket in Fred T's pic.

11-11-2004, 12:08 AM	#1
jakeslim Premium Level Member Join Date: Aug 2004 Location: Northern CA Posts: 829	Need a pic of power steering pump w/brackets installed I am missing a bracket for my power steering pump. I have the pump, its cradled in a big bracket, but i'm sure there is another bracket I'm missing(?). I posted on here looking for one, but no one was sure what I needed. I figure if I can get a pic, then I can ask for the right part. thanks, jakeslim

11-11-2004, 12:52 AM	#3
Fred T Cantankerous Geezer Join Date: Aug 2002 Location: Bel Aire, KS Posts: 6,264	Here's a shot of the bracket on my 69, the pump bracket bolts to this one. __________________ Fred There is no such thing as too much cam...just not enough engine.

11-11-2004, 08:20 PM	#7
Wootdog Senior Member Join Date: Jan 2001 Location: Virginia Beach, Va, USA Posts: 1,677	Where is bolts. I have a small block. No pics. My power steering pump bolts on the left side. It actually has a bolt with a standoff and washers. Kerry __________________ 1969 Chevelle 1990 IROC Z Convertible 2002 Silverado LT

11-11-2004, 08:42 PM	#8
Sweet72 Registered User Join Date: Nov 2003 Location: Alexandria, VA Posts: 1,534	Nice looking engine Fred T. There should be a cast iron cradle type bracket that mounts in front of the sheet metal bracket in Fred T's pic. __________________ '72 GMC SWB C1500 Custom, frame-off in progress. 383 SBC, 9:1CR, Comp Cams XE262H, Scat internal balanced crank, Eagle SIR 6" rods, Keith Black dish pistons, Dart Iron Eagle 72/180 heads, Weiand Stealth intake, Stewart stage I water pump, Holley 4bbl vac sec, TH350 with B&M Shift Improver Kit. 12 bolt positraction.

11-11-2004, 12:35 AM	#2
Longhorn Man its all about the +6 inches Join Date: Jan 2001 Location: Hilliard Ohio Posts: 2,693	What year? what engine? What size pump? What side is the alt on?

11-11-2004, 12:54 AM	#4
Longhorn Man its all about the +6 inches Join Date: Jan 2001 Location: Hilliard Ohio Posts: 2,693	That is the small block with the short water pump...as stock (alt on drivers side)

11-11-2004, 01:02 AM	#6
Longhorn Man its all about the +6 inches Join Date: Jan 2001 Location: Hilliard Ohio Posts: 2,693	Yup, bols to the motor mount, and that is where they commonly break too.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.