|
11-18-2004, 12:02 PM | #1 |
Registered User
Join Date: Jun 2000
Location: Chico, CA
Posts: 1,136
|
Shoulder belts
I'm going to splurge and buy some shoulder belts for my truck. Who carries them? I'd like something that replicates the original style if possible.
__________________
My engine is stock... trust me ;o) |
11-18-2004, 12:57 PM | #2 |
Registered User
Join Date: Nov 2004
Location: MINERAL WELLS WV
Posts: 143
|
I've been looking for the same thing in a blue or white but all that I see is the black belts. I seen some shoulder belts in several different colors for 68-up corvette coupe at www.ecklers.com that I thought could be adapted to a 67-72 chevy truck. Does anyone have access to a 68-72 corvette that could look and see if they would bolt in or could be modified to fit.
|
11-18-2004, 01:05 PM | #3 |
Cantankerous Geezer
Join Date: Aug 2002
Location: Bel Aire, KS
Posts: 6,264
|
Got mine at www.julianos.com
__________________
Fred There is no such thing as too much cam...just not enough engine. |
11-18-2004, 01:10 PM | #4 |
Mike
Join Date: Jan 2003
Location: west chester pa
Posts: 2,473
|
I bought blue ones from Ricks
__________________
70'c/10, 71 suburban4x4 402bb, 72suburban 4/6 drop, 72k/5 4x4 blazer 4" lift 35 tires |
11-18-2004, 01:21 PM | #5 |
Senior Member
Join Date: Jun 2003
Location: Westminster, CO
Posts: 3,071
|
Don"t Buy The Ones From Chevy Duty......they Suck Big Time!!!!
__________________
Alex 1971 Lil' Red 350 SBC 700R4 |
11-18-2004, 01:43 PM | #6 |
67-72 Addict!
Join Date: Feb 2002
Location: The TAX State!
Posts: 7,856
|
I recently installed the 2 point version of these in my dads truck. Very easy to install and can't beat the price!. The center belts are a little too short so I had to buy some angle brackets ($1.69 or so each) from Home Depot and massage them to extend the mounting point to reach up thru the seat. I would recommend the Juliano's anchor plate ($15 for the pair) to mount the retractors. They turned out awesome!. http://cgi.ebay.com/ebaymotors/ws/eB...935575642&rd=1
__________________
Jim 1970 C/10 Fleetside w/Ghost Flames Lowered 4.5" front and 4" rear (Raked) 355/350 Turbo w/shift kit 10" Redneck Performance Verter w/2500 stall Hooker Super Comps part#2808-1 Performer RPM Air-Gap 12 Bolt w/3:73 gears- Eaton Posi Comp Cams XE262 with 1.6 Crane Energizers, Road Demon 625 and Brodix IK 180 heads |
11-18-2004, 02:35 PM | #7 |
Resident Young Old Dude !
Join Date: Jul 2001
Location: Nevada
Posts: 1,948
|
Got mine from Shawn At ****************.. Nice belts...
|
11-19-2004, 09:43 PM | #8 |
Join Date: Dec 1999
Location: Eastern - Manitoba Canada, Winnipeg
Posts: 4,369
|
Ok could someone post a link to the items..dial up sucks trying to surf sites for a correct part.
I'm looking for factory shoulder belts or a real - real close replica. I'd like Green or Black.
__________________
Senior active founding member. 70 3/4 ton GMC Suburban 4x4 250/4 spd. 71 1/2 ton Suburban Chevy 4x4, 350/350 72 Chev 1 ton tow truck 402BB w/Holmes 440 wrecker on propane 2005 FLSTSCI Harley Springer 85 FXSB Harley Lowrider 72 Triumph 650 Bonneville 5spd "Poor people don't have hobbies" Quote from wife. |
11-28-2004, 02:56 PM | #9 | |
Registered User
Join Date: Nov 2004
Location: "Under Montana skies."
Posts: 1,836
|
Quote:
__________________
'71 GMC K20 Suburban, '71 GMC K10 Suburban, '72 Chevy C10 CST Suburban, '72 Chevy K20 clunker pickup. |
|
11-28-2004, 10:55 PM | #10 |
Registered User
Join Date: Jun 2000
Location: Chico, CA
Posts: 1,136
|
Yeah, I'm looking for new factory replica type shoulder belts as well. Anymore suggestions for suppliers?
__________________
My engine is stock... trust me ;o) |
11-28-2004, 11:56 PM | #11 |
67-72 Addict!
Join Date: Feb 2002
Location: The TAX State!
Posts: 7,856
|
I didn't think lap or shoulder replicas were available. The ones I saw when looking look like new generic belts. I would love to see a pic of either style recently purchased to see how they look.
__________________
Jim 1970 C/10 Fleetside w/Ghost Flames Lowered 4.5" front and 4" rear (Raked) 355/350 Turbo w/shift kit 10" Redneck Performance Verter w/2500 stall Hooker Super Comps part#2808-1 Performer RPM Air-Gap 12 Bolt w/3:73 gears- Eaton Posi Comp Cams XE262 with 1.6 Crane Energizers, Road Demon 625 and Brodix IK 180 heads |
11-29-2004, 06:15 PM | #12 |
Registered User
Join Date: May 2004
Location: Canton North Carolina
Posts: 466
|
They are available, but they are made with the newer style webbing. The set I have is made exactly like the originals were with the exception of the web design, originals were a three row pattern and these have a five row pattern. To avoid looking different I bought new lap belts and they have the same pattern as the shoulder belts. As far as I know they are available in all colors - you might try truck shop in crossville tenn, I think the address is [email]trucks72@thetruckshop.com not sure and I will look it up in a minute, and also snakeoyl products as well as cheyenne superman. I bought mine from Jerry Brown in crossville, they came in GM packaging etc. very nice reproductions!!!
Last edited by Harold Shepard; 11-29-2004 at 06:20 PM. |
Bookmarks |
|
|