|
|
|
11-30-2004, 04:56 PM
|
#1 |
|
Registered User
Join Date: Sep 2003
Location: Boise ID
Posts: 609
|
Oil Pan
Has anybody used A deep Sump Oil Pan on there 2-wheel drive with A drop. I am thinking of going A 7-Quart pan for My motor. Any recommendations would be greatly appreciated. THANK YOU!
 Gary
__________________
"72" Red CORVETTE 4-speed 350 "70" Chevy Short Bed early stages of resto. Edel 600 cfm carb Weiand Stealth Intake HEI shorty Headers 4/2 Drop 295 50R 15 TOYO on 10 inch wide corvette rally rims at all 4 corners. "CHEVY RULES"
|
|
|
|
12-01-2004, 03:09 AM
|
#2 |
|
Registered User
Join Date: Sep 2003
Location: Boise ID
Posts: 609
|
ttt anybody
__________________
"72" Red CORVETTE 4-speed 350 "70" Chevy Short Bed early stages of resto. Edel 600 cfm carb Weiand Stealth Intake HEI shorty Headers 4/2 Drop 295 50R 15 TOYO on 10 inch wide corvette rally rims at all 4 corners. "CHEVY RULES"
|
|
|
|
|
12-02-2004, 02:36 PM
|
#3 |
|
Registered User
Join Date: Mar 2004
Location: Alabama
Posts: 705
|
No drop, but do have a 7 qt oil pan in my daily driver. Was on truck by PO so not sure of brand. It angles out at the bottom of each side, so it sits higher than the cross member. Don't think I have ever hit it, but there are a few marks from po, not sure if was in this truck or something else.
__________________
1972 C10 SWB 350 / T400 1972 SWB GMC 350/T350 1972 Cheyenne 20 super "long horn". 402BB / T400 1972 Suburban C10 Deluxe 350 / T350 and a few more.. http://www.myspace.com/afew72s |
|
|
|
|
12-02-2004, 05:05 PM
|
#4 |
|
Registered User
Join Date: Sep 2003
Location: Boise ID
Posts: 609
|
Thank You
Thank You very much for the reply that is the style I am going after.
__________________
"72" Red CORVETTE 4-speed 350 "70" Chevy Short Bed early stages of resto. Edel 600 cfm carb Weiand Stealth Intake HEI shorty Headers 4/2 Drop 295 50R 15 TOYO on 10 inch wide corvette rally rims at all 4 corners. "CHEVY RULES"
|
|
|
|
|
12-02-2004, 10:36 PM
|
#5 |
|
Registered User
Join Date: Mar 2004
Location: Alabama
Posts: 705
|
No problem...
__________________
1972 C10 SWB 350 / T400 1972 SWB GMC 350/T350 1972 Cheyenne 20 super "long horn". 402BB / T400 1972 Suburban C10 Deluxe 350 / T350 and a few more.. http://www.myspace.com/afew72s |
|
|
|
|
12-02-2004, 11:35 PM
|
#6 |
|
What was I thinking??
Join Date: Dec 2003
Location: Commerce City Co
Posts: 637
|
What about a six qt low profile Vette pan? I have used them in some of my 4x4's Sorry no pic
__________________
72 K5 that needs lots of parts.. 71 GMC 3/4 4x4 That doesn't need much which is a good thing I don't think I could aford another money pit... |
|
|
|
 |
| Bookmarks |
|
|
Hybrid Mode
