![]() |
Register or Log In To remove these advertisements. |
|
|
![]() |
|
Thread Tools | Display Modes |
|
![]() |
#1 |
newly minted old timer
Join Date: Dec 1999
Location: Hudson WI
Posts: 3,515
|
![]()
lol. I have a Honda civic as a daily driver. great little car. IM rather good about doing the maintenance on things so when the mileage rolled over I knew it was time to do some things. like adjust the valves. Figured no big deal, I have done this to several kinds of cars.
So I get to the point where the valve cover needs to come off. The book says, dont pry on it. tap it with a soft hammer.. so tap tap tap..... hum.. tap tap tap... tap tap bang bang .. hum.. bang bang bang! you all know the routine lol.. anyway.. nothing, wouldn't come off.. So I look for place to pry. Thinking OK stuid be stupid (knowing my past history of award winning dum acts) so IM really careful. nothing. Dam thing wont come off. So I look again for something I missed.. Checked the book.. I had everything.. so I look for a better place to pry as not to mar the metal causing a leak. I did find a nice little lip.. so i got my pry bar and have it a tug, now what always happens when you pry on something.. dam thing slips off.. anyway. i prayed... it did.. and the other end hit my plastic radiator. that nice felling you all know (hopefully not as well as i do) came over me. sure enough, i saw the oozing of coolant, that liquid trophy of stupidity, instantly awarded to all mechanics at one time or anther. Ever see them little things? Tiny, plastic and $130 bucks at all the places around town. I did find one for 110 on line, will be here tomorrow.. The kicker I guess is the valves still are not adjusted. Wish I was more lazy and would adopt the attitude of most my friends.. if it aint broke, dont fix it.. just thought i would share...IM just glad i can laugh at myself, cuz IM pretty dam funny....but looks are not everything.lol
__________________
____________________________________________ 72 c20 longhorn 65k org miles and counting! 69 k10 Suburban |
![]() |
![]() |
![]() |
#2 |
Registered User
Join Date: Mar 2000
Location: Tucson AZ USA
Posts: 241
|
![]()
Don't worry dude there's a little dum ass in all of us. Some are just worse than others.LOL
------------------ 72LONGHORN 350 CI TURBO 400 A/C P/S P/B HEAVY DUTY SPRINGS ALL THE BELLS AND WHISTLES. TUCSON,AZ. 2001 DODGE RAM WIFES TRUCK 1961 OLDS DYNAMIC 88 394 2BBL UNDER CONST.
__________________
72LONGHORN 350 CI TURBO 400 A/C P/S P/B HEAVY DUTY SPRINGS ALL THE BELLS AND WHISTLES. TUCSON,AZ. 2005 4X4 DODGE RAM 1500 "HEMI"LARAMIE 1961 OLDS DYNAMIC 88 394 4BBL UNDER CONST. |
![]() |
![]() |
![]() |
#3 |
Registered User
Join Date: Nov 2001
Location: Concord, NC
Posts: 2,489
|
![]()
ah...nothin like that has ever happened to me.....YEAH RIGHT......LOL
|
![]() |
![]() |
![]() |
#4 |
Project Junkie! Fishing Poor!!
![]() Join Date: Dec 1999
Location: Olympia,Wa. 98512
Posts: 10,770
|
![]()
Well I'm glad you are able to see the humor in yourself instead of getting angry and inflicting more damage on the offending part.... not so sure I would have stayed so calm.... Two thumbs up to you!! WES www.ClassicHeartbeat.com
------------------ Click (Here) to visit our on-line catolog. E-mail me WEHEPP@attbi.com 72 BB Chevy Blazer 72 BB Chevy Short Fleet 72 SB 3/4 Ton 4X4 72 SB 1/2 Ton SWB 4X4 70 BB Chevy Short Step 70 SB Chevy Short Fleet 69 SB Chevy Short Step 68 SB Chevy Short Step 68 BB GMC Long Fleet "Founder" Classic Heartbeat Pickup Club Olympia, Washington's "Home For Wayword Chevys" www.ClassicHeartbeat.com
__________________
On-line catolog Classic Heartbeat Pickup Parts WEHEPP@comcast.net Call us Toll Free (888) 338-2502 Like Us on Facebook No appointment necessary. 72 BB Chevy Custom Deluxe / Custom Camper 67 I-6 (Soon to be 5.7 LS1) Panel 68 BB Chevy Short Bed 72 6.0 LQ9 Short Bed Chevy 4X4 Olympia's fastest growing truck parts supplier. Olympia's home for Wayward Chevys |
![]() |
![]() |
![]() |
#5 |
aka Crusher, Crushergmc
Join Date: Mar 2000
Location: Oregon
Posts: 1,834
|
![]()
You are definitly not a dumbass. True dumbasses don't know they're a dumbass!
------------------ "KEEP IT DOWN!" 70 Jimmy 454 2wd 56 GMC Big Window
__________________
"KEEP IT DOWN!" 70 Jimmy 454 2wd 56 GMC Big Window "It's funny till someone gets hurt, then it's freakin' hilarious" |
![]() |
![]() |
![]() |
#6 |
"Ochre Ogre"
Join Date: Apr 2000
Location: Springfield, MN
Posts: 3,558
|
![]()
I agree, as far as dumbasses go, you are a smart one!
------------------ 1971 C-10 Suburban 1972 C-10 Suburban 1969 XL Galaxie Fastback 1968 Galaxie 500 Fastback 1974 SCOUT II Montrose, Minnesota
__________________
Bowtie Truck Stop Inc. Mid-West GM Truck Restoration Parts Supplier Your Key Parts, Auto Metal Direct, Dynacorn, and Goodmark dealer. like us @ www.facebook.com/BowtieTruckStop 1971 C-10 Suburban (Ochre) 1971 K-10 Suburban (Ochre) 1972 C-10 Suburban (Ochre) 1972 K-20 Suburban (Yellow- that just aint right!) Springfield, Minnesota 56087 |
![]() |
![]() |
![]() |
#7 |
Account Suspended
Join Date: May 2000
Location: IL
Posts: 0
|
![]()
lol !!! well i wont even try and get into all the retarded things i have done in the past, all of us have dumbass inside of us somewhere, as aforementioned, and Wes has a damned good point about not getting stupid and pissed about it, it done happened now and all you can do is just repair what happened. oh and adjusting valves on those is not the same as on our engines, they are waaaaaaaaaaaaaaaayyyy designed differently, but good luck, I owuldnt even attempt adjusting them myself, i dont know if thats aying something or not, if its running good then i would leave well alone, IMO
have fun and good luck! ------------------ -71/C-10(thx teeitup and crews!)350-4 bolt-4bbl, CH465(thx 71Chev and GMCPaul)longfleetbed now(thnx meathead95)!still building it- -'84/Z28/C'Maro/HO5.0L 700R4- streetstrip shiftkit,3.42(?)alum brk drums/7.5" r/axle, grnd efx, airdam, 15" 5star mags/T-tops/lotsa fun! -79 G20 pass van, 350/th350/10bolt, its a ruster/dailydriver/parts hauler/retriever/deliverer/tool-torch-jacks hauler *paint is overrated Randy- Lincoln, ILrandy@ccaonline.com © RSS Enterprises 2000 |
![]() |
![]() |
![]() |
#8 |
Registered User
Join Date: Nov 2001
Location: Concord, NC
Posts: 2,489
|
![]()
hey mtdave2, you probably already know this, but one thing I would recommend for that honda is replacing the timing belt. not to bad a job. pretty easy if you follow a good manual.....
|
![]() |
![]() |
![]() |
#9 |
Registered User
Join Date: May 2000
Location: Victoria, BC, Canada
Posts: 2,410
|
![]()
You hit a nerve there Dave and just reminded me of a long list of stupid things I have been capable of. Like when I was "reshoeing" the old hoss. I pulled one rear brake assembly apart and replaced the wheel cylinder. For the life of me I couldn't remember how all the springs went back together when I was done. So I pulled the drum off the other side to copy the spring setup. Great, got it all back together, jumped in and started pumping the brake pedal to bleed. Then I hear SPLAT!, uh oh, forgot to put the drum back on the other side! I had to rebuild that wheel cylinder too.
------------------ Southpa 1970 GMC 1500 Custom Victoria, BC, Canada
__________________
1970 GMC 1500 Custom Original 350/TH350 Victoria, BC, Canada You can wish in one hand and crap in the other. See which one gets filled first. |
![]() |
![]() |
![]() |
#10 | |
its all about the +6 inches
Join Date: Jan 2001
Location: Hilliard Ohio
Posts: 2,693
|
![]() Quote:
![]() Adjusting the valvs is easy on hondas...just double check with the feeler guage when you tighten the 10mm lock nut down. You'll probably feel the differance after you finaly get it. ------------------ '69 G.M.C. 350/350. Trying to clean up the left over damage from the Dope-Smokin-Old-Man I've been dubbed the Longhorn Freak/Fanatic/Expert, I just hope I can live up to it. Need to pick up the one ton Longhorn with a PONTIAC 350/350soon. Thanks every one! ![]() Check out The Longhorn Webite. If you need a pic posted, E-mail me at longhornmail@yahoo.com Andy, in Columbus Ohio |
|
![]() |
![]() |
![]() |
#11 |
Listening since '86
Join Date: Sep 2001
Location: Canada
Posts: 1,799
|
![]()
I'm with Wes here, I probably would have pulverized it into little plastic shards!! Then after that, I would have cursed myself for being so stupid!
OT: I did that with a bird house I was trying to put up. I was very carefully trying to nail it to a post, but something went wrong. The bird house kept popping a few panels, and I knew I should have stopped and took a breather, but no, I went a pulverized the birdhouse with the hammer! ------------------ 1970 GMC 1500, 350ci, 3 in a tree http://members.tripod.com/~Jungleman_2/1970GMC.html Vancouver, B.C.
__________________
2007 Saturn Aura - hey it WAS a GM product |
![]() |
![]() |
![]() |
#12 |
Registered User
Join Date: Feb 2000
Location: Brandon, SD, USA
Posts: 1,292
|
![]()
i do things like that all the time and so does my dad but he just gets mad at everything. it is really cool when you can stay calm and keep trying.
__________________
Brandon, SD 69 GMC 1/2 ton 2wd wide long bed with wood 3 on the tree 350 engine 4 bolt main rv cam AIM = Alphray04 |
![]() |
![]() |
![]() |
#13 |
Registered User
Join Date: Dec 2001
Posts: 97
|
![]()
Did you ever get the valve cover off???
|
![]() |
![]() |
![]() |
#14 |
newly minted old timer
Join Date: Dec 1999
Location: Hudson WI
Posts: 3,515
|
![]()
what a day huh.. i never did get the valve cover off. not sure what the trick is. as far as the timing belt i think i was done 60k miles ago.. is it due? ill have to look at the book.
probably a good idea to wait for a while i seem to be in a run of bad luck with mechanical things.. im glad to hear you all have done dum stuff too, at least this one wasnt because i was being realy stupid, like the time i wanted to stoak the camp fire with a gas. lol. cought the whole can on fire, pitched it in the river. had a floating carpet of flame heading down the river... geez, that one was dumb lol oh ya, i must admit i did have the urge to start smashing things, and if i was back home in motana, chances are i would have set the radiator up in the field and got the glock 10 mm.. lol but beeing unemploied and really scraping by, i had to becareful. cant afford much more "mantainence" hehe [This message has been edited by mtdave2 (edited March 13, 2002).]
__________________
____________________________________________ 72 c20 longhorn 65k org miles and counting! 69 k10 Suburban |
![]() |
![]() |
![]() |
#15 |
Senior Member
![]() Join Date: Sep 2001
Location: Seattle, WA, USA
Posts: 5,817
|
![]()
Talk about DUMB ASS. This is probably the dumbest thing I've ever been involved with (I wasn't directly responsible
![]() My dad, a local contractor, and myself were doing an addition on a 1973 split-level house. We had order 96" studs from the lumber yard to build the walls, and had already sheared off the gable sophet to "marry" the new walls to the existing structure. Before we were going to finish the top plate on the walls someone (sadly, not me) noticed that the walls were too high for the existing walls of the house. They were above the roof line! Turns out the house had been built with 92" studs! The trusses were supposed to show up the next day, and we had to work through the night shortening the walls using a jig and a skill saw. That was STUPID. ------------------ '69 3/4 ton C20 2wd w/ 350ci/400THM and a wood bed! '69 3/4 ton Custom 20 2wd w/ ORIGINAL 350ci/4sp Manual and a wood bed (parts beast). Seattle, WA. *See pics of my trucks and project at www.webshots.com!
__________________
'69 3/4 ton C20 2wd-350ci/TH400 '69 3/4 ton Custom 20 2wd-350ci/4sp Manual '99 2wd 5.7 Chevy Tahoe Seattle, WA. |
![]() |
![]() |
![]() |
#16 |
Registered User
Join Date: Jan 2002
Location: Sahuarita, AZ USA
Posts: 2,033
|
![]()
WELCOME TO MY WORLD, Y'ALL
__________________
Bill - Tucson, AZ 47 Chevrolet 2 dr sedan 56 Chevrolet 210 2 dr sedan 66 Chevrolet Malibu 2 dr 4 speed 71 Chevrolet C30 Longhorn 86 Chevrolet Monte Carlo SS (Sold) 01 Chevrolet Tahoe IM - BUSTERWIVE@aol.com |
![]() |
![]() |
![]() |
#17 |
Registered User
Join Date: Dec 2001
Posts: 97
|
![]()
Well, at least no one has admitted to mistaking the bathroom freshener for deodorant......like......me......
|
![]() |
![]() |
![]() |
#18 |
Just Another Crazy Canuck
Join Date: Dec 2000
Location: Richmond,British Columbia Canada
Posts: 1,228
|
![]()
if you want to adjust the valves just pull the plugs and stick finger in and turn them LMAO sorry coudn't resist
I had trouble with the valve cover on my honda too I just wailed on it with a 2x4 and BFH on the front drivers side corner the only good time to mess things up is when when you got a nice big CAT loader to "help the cover off" or the roof or doors........ ahhhhhh the days of the scrapyard did have thier fun moments!! PS anybody ever play Need for Speed 4 Hot Pursuit all the scraping and crashing sounds were made with thta same CAT heheheh that was an extremely fun day you havn't lived til you see a volvo fall 30 feet onto a pickup with a bed full of glass LMAO ------------------ My CANADA includes BEAVER!!!!!!! [img]http://communities.msn.com/_Secure/0NwAzABASh!uohRSfISjhQyAQFlB*NewhOUaHR6bv*u3evbZdsgR9IvkX4X4GCQKh*KzIWBO9**DLq1ZpIJppCQ/Chevy_anim(1).gif[/img] ![]() burlinator2000@hotmail.com Richmond,B.C. [This message has been edited by Burlinator (edited March 13, 2002).]
__________________
1985 ![]() ![]() ![]() soon to be installed: 14bDETROIT,Edelbrock Performer cam,intake and valve springs,Comp roller tips,MSD HEI |
![]() |
![]() |
![]() |
#19 |
Registered User
Join Date: Jan 2002
Location: comox, british columbia
Posts: 110
|
![]()
My father used spray deodorant as hair spray for over a week before complaing to my mother that it did'nt work for him.
Let's just say doing stupid things is heriditary. ------------------ 70 C-10 350 with weind intake,eldelbrock carb,HEI,305 heads,and a mild cam
__________________
70 C-10 350 with weind intake,eldelbrock carb,HEI,305 heads,a mild cam. also a blazer tank w/bed fill,shaved stake pockets and tailgate |
![]() |
![]() |
![]() |
#20 |
Registered User
Join Date: Dec 1999
Location: Surrey, B.C. , Canada
Posts: 874
|
![]()
Ah yes the lovely feeling you get watching that little stream of coolant come out when your prybar snaps and hits the radiator core. That one cost me $200. Also if you work a newer honda, 97+ i think there is a air intake that is bolted on top of the radiator, its the first place your hand rests when looking for something to lean on..... DO NOT LEAN ON IT!!!!! You will snap the top of the radiator. Seen that a few times now (not me thankfully).
Have fun and try not to be too silly. CoryM ------------------ 1970 heavy duty C-10 fleetside sport truck. Vancouver B.C. Canada http://www.geocities.com/chevroletc1070 "Take up our quarrel with the foe: To you from failing hands we throw The torch; be yours to hold it high." Lieutenant Colonel John McCrae, Canadian Army
__________________
1970 heavy duty C-10 fleetside sport truck. Vancouver B.C. Canada http://www.geocities.com/chevroletc1070 "Take up our quarrel with the foe: To you from failing hands we throw The torch; be yours to hold it high." Lieutenant Colonel John McCrae, Canadian Army |
![]() |
![]() |
![]() |
#21 | |
Senior Member
![]() Join Date: Mar 2005
Location: weatherford,texas
Posts: 1,003
|
Re: dont you hate it when you know you are a dumass
Quote:
i did this on my wife's honda civic.i felt like a dumbass. ![]() |
|
![]() |
![]() |
![]() |
#22 |
Registered User
Join Date: Mar 2001
Location: Rapid City, South Dakota
Posts: 222
|
![]()
Dave, Dave, Dave, Just when I was thinking you had it all together!!! and were perfect like all us here on the board. Sorry buddy.
------------------ Bill Rapid City, SD 67 short stepside, in weeds 6Cyl 69 Longhorn CST 396 nice original
__________________
Bill Rapid City, SD 67 short stepside, in weeds 6Cyl 69 Longhorn CST 396 nice original |
![]() |
![]() |
![]() |
#23 |
Senior Member
![]() Join Date: Dec 1999
Location: Darrington, Washington
Posts: 3,963
|
![]()
Heres one a dumb one from me and my stepdad,i broke a 2bbl carb stud on a 61 Impala,we tried everything to get it out heat it up,special tools,well final conclusion was drill it,OH will just stuff the intake with rags,then use the shop vac,keep in mind these bolt holes go into the intake and done have a stoping point they go straight threw,well once done thread replace got all shavings out with shop vac,and on the rags,put on the fresh rebuilt carb,started it up and it knocked like a son of a gun.ran good last time,well pulled the heads and got a piece of metal on top of the piston and it wedged it flattened itself to the top of the piston,i scraped it off,got the motor back together-no more knock-ran sweat,moral of this story is dont always do it the easy was-shoulda just pulled the intake and done it,but no ended up pulling intake anyway,distributor,heads,and all the other bs,but a upper gasket set,put it all back together,and adjust everything.OH i learned from that one,
Or how bout the time when i had some buddies over at my moms when mom and stepdad were vacationing and we were a bit smashed and had some funny stuff we all got the munchies,my mom left me everything to make tacos,and when seasoning the meat the container was one of those big costco ones,and what i thought was the taco seasoning,well was the cinnamon it was in the same style container,and it looked like taco seasoning-hey i was drunk!!!.I cooked it up,made are tacos.First bite we all looked at each other like WTF???they tasted BAD we went over and saw what i did,we all still ate them though,words of advise dont smoke funny stuff and drink especially when cooking,and you have the munchies.Ill never forget that one!!! |
![]() |
![]() |
![]() |
#24 |
Senior Member
![]() Join Date: Dec 1999
Location: Darrington, Washington
Posts: 3,963
|
![]()
OH thought of another incident on a road trip with my stepday,my stomach started to churn,and i HAD to hit the next rest stop,barely made it in,well needless to say-there wasnt any tp,it wasnt pleasent smelling people were commenting,laughing(damn something die in here?)and here i had to say,HELP can someone hand me some toilet paper-well no one did,finally my stepdad came in must of been 10 minutes asked if i was ok,i said can you please hand me some toilet paper-He never left that alone the whole trip!!!
|
![]() |
![]() |
![]() |
#25 |
user # 2756
![]() Join Date: Jun 2001
Location: Chesapeake, Virginia
Posts: 4,612
|
![]()
Just had to add to this after what I did today. I was cutting down a tree for my neighbor to get some extra money, and cut a limb that swung the wrong direction and taped the power lines. Knocked power out to my whole street. Luckily it only took the power guy 5 minutes to replace the fuse. I felt like a magor dumba$$ after that. Oh well no damage to anything but my ego.....
------------------ 1970 GMC K25 Custom Chesapeake, VA My 70 GMCor Webshots http://community.webshots.com/user/70gmc
__________________
1970 K25, 8' stepside bed 350/465/205 44 up front, 60 in the rear 4.10s rolling on 33" Dunlop MTs 1986 K5, 350/465/208 Dana 60/14 bolt from a cucv 36" Super Swampers TSL/SX 1983 K20 w/ CUCV axles, 350/700R4/208 sitting on 37" Goodyears 1986 M1031 6.2 diesel, TH400/NP205 locker in the rear and a LS in the front, all stock for now..... 1986 K30, 350/400/205 dana 60 and 14 bolt. I kept the drivetrain. Body/bad and chassis are gone. 1981 K30, 350/465/205 dana 60 and dually 14 bolt. Has a G80, and a flat bed. Going to replace the flat bed. 1985 K20, 350/400/208 10 bolt and SF 14 bolt. I wonder where I can find some 1 tons. Hmmmmm ![]() |
![]() |
![]() |
![]() |
Bookmarks |
|
|