New Member's First Post-Door Handle Help - The 1947 - Present Chevrolet & GMC Truck Message Board Network

jesgord · 12-04-2004, 09:43 AM

Hello everyone-this is my first post although I have been cruising the board for a couple of weeks now. What a great place filled with knowledgeable people! I recently purchased a ’72 Cheyenne and am excited to work on it. I just replaced my brake master cylinder and now it seems like a booster is next-but I need some help on a simpler problem now. Most of my experience with older cars has been the work I’ve done on my ’68 volvo 1800s which is different ball of wax to say the least. I am trying to reattach a interior door handle to the Cheyenne and for the life of me can not figure out how to mount the clip on the handle so that it clips onto the spindle- I feel like a complete idiot! It's possible my spindle is the shorter version an from a older door but I don’t think so. Could someone please post a pic of how the clip goes on the handle befor it mounts on the spindle? It would be greatly appreciated. Thanks for the help!

7T2 · 12-04-2004, 10:02 AM

<sings> newbies, newbies helping newbies...

Just happened to have mine off and a camera handy:

7T2 · 12-04-2004, 10:07 AM

By the way, the little clip is commonly referred to as an "Oh Jesus" clip, because of the tendancy of the owner to scream "OH JESUS!" as it shoots past their head when removing it.

LUV2XCLR8 · 12-04-2004, 10:09 AM

Quote:

Originally Posted by 7T2

By the way, the little clip is commonly referred to as an "Oh Jesus" clip, because of the tendancy of the owner to scream "OH JESUS!" as it shoots past their head when removing it.

LMFAO AND ROTF

JESGORD - WELCOME 2 THE BOARD FROM WEST 10-UH-C

**Palf70Step** · 12-04-2004, 10:05 AM

Yeah sometimes it seems silly the things we go to question, but then sometimse they just don't make sense till they are pointed out. Welcome to the board and a wealth of knowledge.

jesgord · 12-04-2004, 10:37 AM

Thanks 7T2. I tried it that way and it didn't clip into place. Maybe it is a shorter door spindle thats my problem?

neonlarry · 12-04-2004, 04:16 PM

When you put it on you have to give it a pretty good push or tap it with a rubber mallet. The pieces of spring that are protuding into the hole where the shaft goes need to be pushed out by the end of the shaft so the handle will slide down and then the springs will snick into the grove about ½" down the shaft.

jesgord · 12-04-2004, 05:43 PM

Thanks Neonlarry -I'll get a mallet out and give 'er a good whack. I like to be carefull-maybe I've just been too gentle

LONGHAIR · 12-04-2004, 06:33 PM

OK, 3 things.......

7T2, while your picture is helpful.....The clip is on wrong. It goes in from the other side. Those little bumps (on the left in your pic) are there to keep it from sliding on too far. If it goes in too far the handle can fall off. The bends that fit into the grove move off-center to a narrower place on the shaft.

Second, You shouldn't need a mallet. If the handle fits the splines properly with-out the clip being installed (check it first) then it only takes a little pressure to get it back on. The taper on the end of the shaft opens the clip, you might need to turn it a bit to align the splines.

Third, it depends upon how you got it apart. (That is the question most people ask) If you stretched the clip, it may not fit right.

I always heard the "Jesus clip" was because........once it flies across the room....only Jesus knows where it went.

jesgord · 12-04-2004, 06:59 PM

So longhair, from what you are saying, it sounds to me like it goes in front of the bumps on the left side of the pic not over them? Is that right?

LUV2XCLR8 · 12-04-2004, 07:06 PM

Quote:

Originally Posted by jesgord

So longhair, from what you are saying, it sounds to me like it goes in front of the bumps on the left side of the pic not over them? Is that right?

THERE ARE ACTUALLY BUMPS ON BOTH SIDES, ONE SIDE HAS ONE, THE
OTHER SIDE HAS TWO, BOTH WILL WORK, ONE WAY WILL BE TIGHTER.

7T2 · 12-04-2004, 07:10 PM

Quote:

Originally Posted by jesgord

So longhair, from what you are saying, it sounds to me like it goes in front of the bumps on the left side of the pic not over them? Is that right?

Longhair's right, my bad.

While there IS a standoff on the other side as well (hard to see in the picture), mounting it that way would make it really difficult to get the clip off with a door handle removal tool.

It should look like this:

jesgord · 12-04-2004, 07:33 PM

got it! Thanks guys

Blue Beard · 12-04-2004, 09:22 PM

Welcome from SW Washington State...

krue · 12-05-2004, 11:34 AM

Welcome from South Mississippi!

FRENCHBLUE72 · 12-05-2004, 05:34 PM

Welcome from southern oregon hope you got your door handle problem fixed...

jesgord · 12-05-2004, 05:45 PM

Thanks for all of the welcomes and the help. My clip was bent. Went to the parts store, got a new one and it snapped right on-no mallet needed.

71-longbed · 12-05-2004, 07:14 PM

Welcome from Oregon ... now that we've seen the door handle ... get some pics of your truck

12-04-2004, 09:43 AM	#1
jesgord Registered User Join Date: Nov 2004 Location: Orient, NY Posts: 27	New Member's First Post-Door Handle Help Hello everyone-this is my first post although I have been cruising the board for a couple of weeks now. What a great place filled with knowledgeable people! I recently purchased a ’72 Cheyenne and am excited to work on it. I just replaced my brake master cylinder and now it seems like a booster is next-but I need some help on a simpler problem now. Most of my experience with older cars has been the work I’ve done on my ’68 volvo 1800s which is different ball of wax to say the least. I am trying to reattach a interior door handle to the Cheyenne and for the life of me can not figure out how to mount the clip on the handle so that it clips onto the spindle- I feel like a complete idiot! It's possible my spindle is the shorter version an from a older door but I don’t think so. Could someone please post a pic of how the clip goes on the handle befor it mounts on the spindle? It would be greatly appreciated. Thanks for the help!

12-04-2004, 10:02 AM	#2
7T2 Active Member Join Date: Dec 2004 Location: Marysville, OH Posts: 667	<sings> newbies, newbies helping newbies... Just happened to have mine off and a camera handy: Attached Images

12-04-2004, 10:05 AM	#5
Palf70Step State of Confusion! Join Date: Jul 2002 Location: Gulfport, MS USA Posts: 47,216	Yeah sometimes it seems silly the things we go to question, but then sometimse they just don't make sense till they are pointed out. Welcome to the board and a wealth of knowledge. __________________ Bill 1970 Chevy Custom/10 LWB Fleetside 2010 Toyota Tacoma PreRunner SR5 Double Cab - DD Member of Louisiana Classic Truck Club (LCTC) Bill's Gallery Life isn't tied with a bow, but it's still a gift. Live simply. Love generously. Care deeply. Speak kindly. Leave the rest to God!

12-04-2004, 10:37 AM	#6
jesgord Registered User Join Date: Nov 2004 Location: Orient, NY Posts: 27	Thanks 7T2. I tried it that way and it didn't clip into place. Maybe it is a shorter door spindle thats my problem? Last edited by jesgord; 12-04-2004 at 10:43 AM.

12-04-2004, 04:16 PM	#7
neonlarry Registered User Join Date: Feb 2002 Location: Vacaville, CA Posts: 2,745	When you put it on you have to give it a pretty good push or tap it with a rubber mallet. The pieces of spring that are protuding into the hole where the shaft goes need to be pushed out by the end of the shaft so the handle will slide down and then the springs will snick into the grove about ½" down the shaft. __________________ 70 C/10 Light Red 350/TH350, HEI, Duals w/40 series Flows, 91 seat, LED taillights 99 Pontiac S/C GTP, SLP Ram Air hood, GMPP Konis & springs 95 Neon ACR, MP PCM, AFX UDP, 3.0 CAI

12-04-2004, 10:07 AM	#3
7T2 Active Member Join Date: Dec 2004 Location: Marysville, OH Posts: 667	By the way, the little clip is commonly referred to as an "Oh Jesus" clip, because of the tendancy of the owner to scream "OH JESUS!" as it shoots past their head when removing it.

12-04-2004, 05:43 PM	#8
jesgord Registered User Join Date: Nov 2004 Location: Orient, NY Posts: 27	Thanks Neonlarry -I'll get a mallet out and give 'er a good whack. I like to be carefull-maybe I've just been too gentle

12-04-2004, 06:33 PM	#9
LONGHAIR just can't cover up my redneck Join Date: May 2004 Location: Columbus OH Posts: 11,414	OK, 3 things....... 7T2, while your picture is helpful.....The clip is on wrong. It goes in from the other side. Those little bumps (on the left in your pic) are there to keep it from sliding on too far. If it goes in too far the handle can fall off. The bends that fit into the grove move off-center to a narrower place on the shaft. Second, You shouldn't need a mallet. If the handle fits the splines properly with-out the clip being installed (check it first) then it only takes a little pressure to get it back on. The taper on the end of the shaft opens the clip, you might need to turn it a bit to align the splines. Third, it depends upon how you got it apart. (That is the question most people ask) If you stretched the clip, it may not fit right. I always heard the "Jesus clip" was because........once it flies across the room....only Jesus knows where it went.

12-04-2004, 06:59 PM	#10
jesgord Registered User Join Date: Nov 2004 Location: Orient, NY Posts: 27	So longhair, from what you are saying, it sounds to me like it goes in front of the bumps on the left side of the pic not over them? Is that right?

12-04-2004, 07:33 PM	#13
jesgord Registered User Join Date: Nov 2004 Location: Orient, NY Posts: 27	got it! Thanks guys

12-04-2004, 09:22 PM	#14
Blue Beard Registered User Join Date: Jan 2003 Location: Washington State Posts: 8,831	Welcome from SW Washington State... __________________ 1970 Chev CST 2003 Harley Fatboy 1975 Chevrolet Step Van 1956 Chev Bel Air 1977 Blazer 2WD For Sale $3000.00 1978 Blazer 2WD For Sale $7000.00 1978 Silverado 2005 Monte Carlo

12-05-2004, 11:34 AM	#15
krue Designated A-hole! Join Date: Mar 2003 Location: South Mississippi Posts: 36,448	Welcome from South Mississippi! __________________ "If it ain't broke, fix it 'til it is!" Being stupid ain't illegal. We're Still Debt Free Except for the House!!! www.daveramsey.com 70 GMC SWB Stepside project "Green Booger" soon to be 6.0l/4l80e 93 S-10 "Poppaw's Truck"

12-05-2004, 05:34 PM	#16
FRENCHBLUE72 PROJECT 7DEUCE Join Date: Dec 2002 Location: GRANTS PASS OR Posts: 21,606	Welcome from southern oregon hope you got your door handle problem fixed... __________________ GO BIG GREEN GO DUCKS MEMBER #6377 72 k-5 daily driver 6'' lift 35'' 350-350-205 slowly getting rust free. Project "7DEUCE" check out my build http://67-72chevytrucks.com/vboard/s...d.php?t=267665 Tim Powell..R.I.P EastSideLowlife..... R.I.P..

12-05-2004, 05:45 PM	#17
jesgord Registered User Join Date: Nov 2004 Location: Orient, NY Posts: 27	Thanks for all of the welcomes and the help. My clip was bent. Went to the parts store, got a new one and it snapped right on-no mallet needed.

12-05-2004, 07:14 PM	#18
71-longbed Its Magically Delicious Join Date: Jan 2003 Location: oregon Posts: 2,398	Welcome from Oregon ... now that we've seen the door handle ... get some pics of your truck __________________ 71 C10 LWB 350sbc -TH350 12 bolt 3.42 Posi Of all my favorite things to do, The utmost is to have a brew. My love grows for my foamy friend, with each thirst-quenching elbow bend. Beer so frosty, smooth, and cold it's paradise pure liquid gold. Yes beer means many things to me that's all for now cus I gotta pee.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.