edelbrock intake f/s - The 1947 - Present Chevrolet & GMC Truck Message Board Network

CHEVYE · 01-08-2005, 02:17 AM

edelbrock performer intake for small block. very clean and in good shape. cost $115 new in summit. i`ll take $60 plus the ride, thanks, eric.

suville · 01-08-2005, 04:10 PM

Is it possible to get pics of the head flange mating surface? Electrolisis usually does a number on aluminum intakes. And what would shipping to 98264 cost? Thanks for your time.

CHEVYE · 01-08-2005, 04:51 PM

sorry for poor pic quality. all mating surfaces are excellent, it was not in use for very long. i`d have to check on shipping but i would probably guess $10-$12, thanks, eric.

CHEVYE · 01-08-2005, 11:00 PM

ttt.

CHEVYE · 01-10-2005, 03:05 PM

ttt.... one more time, no one needs this?

Putter · 01-10-2005, 05:22 PM

That isn't the one from my (pending) smallbock is it???? (**cringing slightly**)

CHEVYE · 01-10-2005, 05:57 PM

no sir! yours is brand new out of the box and hasn`t even had a carb on it yet. i`ve got 3 of these and a rpm air gap laying in the garage, i just need to lighten up on all of this stuff laying around.

vtblazer · 01-10-2005, 06:07 PM

Quote:

Originally Posted by CHEVYE

a rpm air gap

Is it for sale also?
If so, could you let me know via pm about cost/condition please?
Thanks.

CHEVYE · 01-10-2005, 06:37 PM

Quote:

Originally Posted by vtblazer

Is it for sale also?
If so, could you let me know via pm about cost/condition please?
Thanks.

nah, that one`s going on my baby.

LUV2XCLR8 · 01-10-2005, 06:49 PM

ERIC

HOW ARE YOU GOING TO GET MY FENDERS HERE THIS
WEEKEND WITH ALL OF THIS STUFF LOADED INTO YOUR RIDE

CHEVYE · 01-10-2005, 07:03 PM

Quote:

Originally Posted by LUV2XCLR8

ERIC

HOW ARE YOU GOING TO GET MY FENDERS HERE THIS
WEEKEND WITH ALL OF THIS STUFF LOADED INTO YOUR RIDE

i`ve got the engine/trans strapped to a pallet on the back of the truck. and the rest in boxes.

vtblazer · 01-10-2005, 06:49 PM

Quote:

Originally Posted by CHEVYE

nah, that one`s going on my baby.

Figures...had to ask though. Thanks for the reply.

Putter · 01-10-2005, 06:07 PM

Wheeeew. I was startin' to fret there for a second. Oh well, quittin' time. Gotta' get home for supper!

01-08-2005, 02:17 AM	#1
CHEVYE my gas saver Join Date: Sep 2003 Location: Clarksville, TN Posts: 2,046	edelbrock intake f/s edelbrock performer intake for small block. very clean and in good shape. cost $115 new in summit. i`ll take $60 plus the ride, thanks, eric. Attached Images __________________ 85' SWB, 4.3/TH350, getting ready for paint 84`SWB, 462ci./TH400, cowl hood, 15" billet spec., flows, blazer buckets/console, flat black 71`SWB, project ebay feedback

01-08-2005, 04:51 PM	#3
CHEVYE my gas saver Join Date: Sep 2003 Location: Clarksville, TN Posts: 2,046	sorry for poor pic quality. all mating surfaces are excellent, it was not in use for very long. i`d have to check on shipping but i would probably guess $10-$12, thanks, eric. Attached Images __________________ 85' SWB, 4.3/TH350, getting ready for paint 84`SWB, 462ci./TH400, cowl hood, 15" billet spec., flows, blazer buckets/console, flat black 71`SWB, project ebay feedback

01-08-2005, 11:00 PM	#4
CHEVYE my gas saver Join Date: Sep 2003 Location: Clarksville, TN Posts: 2,046	ttt. __________________ 85' SWB, 4.3/TH350, getting ready for paint 84`SWB, 462ci./TH400, cowl hood, 15" billet spec., flows, blazer buckets/console, flat black 71`SWB, project ebay feedback

01-10-2005, 03:05 PM	#5
CHEVYE my gas saver Join Date: Sep 2003 Location: Clarksville, TN Posts: 2,046	ttt.... one more time, no one needs this? __________________ 85' SWB, 4.3/TH350, getting ready for paint 84`SWB, 462ci./TH400, cowl hood, 15" billet spec., flows, blazer buckets/console, flat black 71`SWB, project ebay feedback

01-10-2005, 05:22 PM	#6
Putter More Cowbell.... Join Date: Mar 2004 Location: Puckett, MS Posts: 3,569	That isn't the one from my (pending) smallbock is it???? (cringing slightly) __________________ *There once was a member from Puckett.....Who ( fill in the blank blank blank* ) bucket**

01-08-2005, 04:10 PM	#2
suville Registered User Join Date: Jun 2003 Location: Mtn. Home, Idaho Posts: 906	Is it possible to get pics of the head flange mating surface? Electrolisis usually does a number on aluminum intakes. And what would shipping to 98264 cost? Thanks for your time.

01-10-2005, 05:57 PM	#7
CHEVYE my gas saver Join Date: Sep 2003 Location: Clarksville, TN Posts: 2,046	no sir! yours is brand new out of the box and hasn`t even had a carb on it yet. i`ve got 3 of these and a rpm air gap laying in the garage, i just need to lighten up on all of this stuff laying around. __________________ 85' SWB, 4.3/TH350, getting ready for paint 84`SWB, 462ci./TH400, cowl hood, 15" billet spec., flows, blazer buckets/console, flat black 71`SWB, project ebay feedback

01-10-2005, 06:49 PM	#10
LUV2XCLR8 The LuvShack Garage Join Date: Jan 2004 Location: Maple Grove, TN (West Side) Posts: 30,484	ERIC HOW ARE YOU GOING TO GET MY FENDERS HERE THIS WEEKEND WITH ALL OF THIS STUFF LOADED INTO YOUR RIDE __________________ Owner/Op: "TN Classic Transport Carriers" The Toy: "Square Vette" 72 Hybrid Blazer Toy Barn: "LuvShack" 40 x 60 x 20 Shop Tow Piggy:"Maddy" 88 Silverado 3500 Hauler: "Feathers" 14 Aluma 8218T

01-10-2005, 06:07 PM	#13
Putter More Cowbell.... Join Date: Mar 2004 Location: Puckett, MS Posts: 3,569	Wheeeew. I was startin' to fret there for a second. Oh well, quittin' time. Gotta' get home for supper! __________________ *There once was a member from Puckett.....Who ( fill in the blank blank blank* ) bucket**



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.