Still looking for steering wheel - The 1947 - Present Chevrolet & GMC Truck Message Board Network

HeavyD · 01-11-2005, 10:32 PM

I posted this a few months ago but thought I would try again. I would like to put a 3 spoke steering wheel (aluminum spokes with black rim) on my truck but was hoping not to have to shell out repro prices (about $500 Canadian by time all accessories are added in) for a new one. Does anyone have one in decent shape they would like to part?

Here is a pic of what I would like:

72dually · 01-11-2005, 10:53 PM

I know what that is, very nice, Ive had 2, 1 LS5, 1 396
How much are you willing to pay in US dollars

f.monroe · 01-12-2005, 12:16 AM

Have you looked on Ebay .I think they have reproductions for about $175 US. Where did you find that picture ? I have a 1970 SS396 right now that is a factory Cranberry Red car with code 788 Factory Red Bucket seat interior .I wish it looked like that one .Frank

todds3535 · 01-12-2005, 12:32 AM

Not sure if this is exactly what your looking for, but I located this one on eBay.

http://cgi.ebay.com/ebaymotors/ws/eB...518714576&rd=1

todds3535 · 01-12-2005, 12:36 AM

And another......

http://cgi.ebay.com/ebaymotors/ws/eB...517957594&rd=1

HeavyD · 01-12-2005, 01:06 AM

Thanks everyone. I can buy a repo here for $350 Canadian or so, but that does not include horn cap or taxes. I was hoping to pay around 200 or so US for a good used one. I will see what I can do with that last ebay one. Thanks again.

70 shorty · 01-12-2005, 02:01 PM

I don't know, but I'd like to have the car that that wheel is attached to!

**StingRay** · 01-12-2005, 02:09 PM

I found mine complete in a Buick Skyhawk for 15 bucks. I still stumble across the odd one in other than black once in a while. It's been along time since I've found a black one but it's still worth lookin'.

Chevy Muscle · 01-12-2005, 02:16 PM

I really like those wheels and have considered buying one for my Blazer.

Grant sells a repo that looks pretty good. It's the 967 model:
http://www.grantproducts.com/

The MSRP is about $160 or so US with the bowtie horn button.

One issue is that the dish is over 4" and I would be afraid that our trucks column setup is so close now that it would put the wheel too close to you.

72BLAZERDUDE · 01-12-2005, 02:39 PM

Try WWW.summitracing.com . They have a repo with foam grips for 68.00. Its Grant #969

HeavyD · 01-12-2005, 03:00 PM

StingRay: I have looked at Skyhawk wheels, but always see colors, not black. They are nice, but I need a black one so I guess I have to pay the $.

Already Gone: I might try RPM today. One repo guy in Ontario quoted me 500 bucks for complete setup. Original Parts Group wants $152 for wheel alone, or $250 for a kit with horn cap, etc. $250 converted to USD is $299, so even with shipping it might still be cheaper to buy across border. I don't mind paying for good parts, but I have seen buckets/console (and your newer buckets) on here for that amount.

At least others have an idea of what this stuff will cost now. I am going to check around to see who will give me the best deal. Thanks to all who responded.

01-11-2005, 10:32 PM	#1
HeavyD Senior Member Join Date: Sep 2004 Location: Wakaw, Sask, Canada Posts: 3,180	Still looking for steering wheel I posted this a few months ago but thought I would try again. I would like to put a 3 spoke steering wheel (aluminum spokes with black rim) on my truck but was hoping not to have to shell out repro prices (about $500 Canadian by time all accessories are added in) for a new one. Does anyone have one in decent shape they would like to part? Here is a pic of what I would like: __________________ "You can take the man out of PA, but you can't take PA out of the man"

01-11-2005, 10:53 PM	#2
72dually Senior Member Join Date: Apr 2004 Location: Northern Arizona Posts: 687	I know what that is, very nice, Ive had 2, 1 LS5, 1 396 How much are you willing to pay in US dollars Last edited by 72dually; 01-11-2005 at 11:01 PM.

01-12-2005, 12:16 AM	#3
f.monroe Senior Member Join Date: May 2004 Location: Caldwell,Tx. Posts: 3,648	Wheel Have you looked on Ebay .I think they have reproductions for about $175 US. Where did you find that picture ? I have a 1970 SS396 right now that is a factory Cranberry Red car with code 788 Factory Red Bucket seat interior .I wish it looked like that one .Frank

01-12-2005, 12:32 AM	#4
todds3535 Registered User Join Date: Mar 2004 Location: Michigan Posts: 142	Not sure if this is exactly what your looking for, but I located this one on eBay. http://cgi.ebay.com/ebaymotors/ws/eB...518714576&rd=1 __________________ 1987 K5 Blazer 350 TBI / Sold.... Never argue with an idiot, he'll drag you down to his level and beat you with experience.

01-12-2005, 12:36 AM	#5
todds3535 Registered User Join Date: Mar 2004 Location: Michigan Posts: 142	And another...... http://cgi.ebay.com/ebaymotors/ws/eB...517957594&rd=1 __________________ 1987 K5 Blazer 350 TBI / Sold.... Never argue with an idiot, he'll drag you down to his level and beat you with experience.

01-12-2005, 01:06 AM	#6
HeavyD Senior Member Join Date: Sep 2004 Location: Wakaw, Sask, Canada Posts: 3,180	Thanks everyone. I can buy a repo here for $350 Canadian or so, but that does not include horn cap or taxes. I was hoping to pay around 200 or so US for a good used one. I will see what I can do with that last ebay one. Thanks again. __________________ "You can take the man out of PA, but you can't take PA out of the man"

01-12-2005, 02:01 PM	#7
70 shorty Where's my beer? Join Date: Oct 2004 Location: Glen Allen, VA Posts: 1,772	I don't know, but I'd like to have the car that that wheel is attached to! __________________ 70 C10, shortstep, .30 over 250,Hurst shifted 3 spd parts hauler. Holley 390, Clifford Intake, Header, ported cylinder head, unknown bigger cam. 79 Corvette L82, 4 spd, black, red interior, headers, flowmasters, and unkown bigger cam. '03 Grand Cherokee Laredo, 4.0 4x4 daily driver. 165K miles, and runs great '08 Tahoe LTZ 4x4 155K

01-12-2005, 02:09 PM	#8
StingRay Senior Member Join Date: Mar 2000 Location: Saskatoon,SK,Canada Posts: 2,487	I found mine complete in a Buick Skyhawk for 15 bucks. I still stumble across the odd one in other than black once in a while. It's been along time since I've found a black one but it's still worth lookin'. __________________ Saskatoon, Saskatchewan Canada

01-12-2005, 02:16 PM	#9
Chevy Muscle < 69 Blazer Join Date: Mar 2004 Location: Nevada, TX Posts: 292	I really like those wheels and have considered buying one for my Blazer. Grant sells a repo that looks pretty good. It's the 967 model: http://www.grantproducts.com/ The MSRP is about $160 or so US with the bowtie horn button. One issue is that the dish is over 4" and I would be afraid that our trucks column setup is so close now that it would put the wheel too close to you.

01-12-2005, 02:39 PM	#10
72BLAZERDUDE Registered User Join Date: Jan 2002 Location: WATAUGA,TX Posts: 675	Try WWW.summitracing.com . They have a repo with foam grips for 68.00. Its Grant #969 __________________ 72 2wd 307/AT/AC/TILT WHEEL 78 JIMMY HIGH SIERRA

01-12-2005, 03:00 PM	#11
HeavyD Senior Member Join Date: Sep 2004 Location: Wakaw, Sask, Canada Posts: 3,180	StingRay: I have looked at Skyhawk wheels, but always see colors, not black. They are nice, but I need a black one so I guess I have to pay the $. Already Gone: I might try RPM today. One repo guy in Ontario quoted me 500 bucks for complete setup. Original Parts Group wants $152 for wheel alone, or $250 for a kit with horn cap, etc. $250 converted to USD is $299, so even with shipping it might still be cheaper to buy across border. I don't mind paying for good parts, but I have seen buckets/console (and your newer buckets) on here for that amount. At least others have an idea of what this stuff will cost now. I am going to check around to see who will give me the best deal. Thanks to all who responded. __________________ "You can take the man out of PA, but you can't take PA out of the man"



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.