Rear Door Emblem - The 1947 - Present Chevrolet & GMC Truck Message Board Network

vtblazer · 01-12-2005, 07:58 AM

Trying to find the "chevrolet" emblem for the rear right barn door.
Driver quality is fine, just something that's complete/whole with the studs intact.

Florida Mike · 01-12-2005, 02:50 PM

Is the emblem the same on a tailgate of a sub?

vtblazer · 01-12-2005, 04:35 PM

Quote:

Originally Posted by Florida Mike

Is the emblem the same on a tailgate of a sub?

Not sure...

bagged91 · 01-12-2005, 04:58 PM

I think it is but again, not 100% positive. Anybody have any idea on how to straighten one?

**CPNE** · 01-12-2005, 05:02 PM

It is I know

vtblazer · 01-12-2005, 05:21 PM

Quote:

Originally Posted by CPNE

It is I know

I was waiting for you to tell us, took ya long enough. :p

Oh yeah, thanks.

**CPNE** · 01-12-2005, 05:26 PM

I'm still recovering from the shock of seeing that "great white"

. Can't call it Ochre Winfrey now, maybe Kirstie Alley or Delta Burke?

vtblazer · 01-12-2005, 05:56 PM

Your killin' me.

I know, sorry bud, had to do it.
I' liked "Ochre Winfrey" too.

olblue60@aol.com · 01-27-2005, 06:56 PM

They are a tough find. Took me over a year to find one and its all pitted. I understand that they are the same as either pre 71 or 71 Chevrolet van and before for a couple of years. Then the emblem is the same on the vans for another couple of years after,except for the fact that there are only 3 mounting posts. Hope it helps. I still found them broken on everything that I found.If you find a second one in nice cond, keep me in mind.I'll probably end up painting mine black its so rough.good luck!

John

P.S. Still selling that rust free Blazer?

olblue60@aol.com · 01-27-2005, 07:00 PM

Bagged
I think that pot metal needs to be heated to bend. Dont know how hot though. Dont melt it! I'm sure that there are people on the site that know.

bagged91 · 01-28-2005, 12:05 AM

Thanks. The emblem on my 72' Parts burb is pretty decent(not a lot of pits) but has a slight bend in it from the dent above it on the gate. I haven't touched it yet. I'm hoping to get it off in one piece, straighten it and have it and the ring around the lockbutton and the handle replated someday...

Florida Mike · 01-28-2005, 12:30 AM

There was one on a tailgate in a junkyard here a month ago it had some pitting but ill see if it will come off this weekend if you like.....
mike

Florida Mike · 01-29-2005, 07:09 PM

Went to the yard today...was closed. Will try again.
mike

vtblazer · 01-29-2005, 07:17 PM

Quote:

Originally Posted by Florida Mike

Went to the yard today...was closed. Will try again.
mike

very

thanks

Florida Mike · 01-31-2005, 07:40 PM

Went back and got it today....some pitting and a slight bend but oughta be o.k. for a driver IMHO.....pm me an address..vt blazer

vtblazer · 01-31-2005, 09:37 PM

Appreciate the efforts, pm sent.

Florida Mike · 02-05-2005, 11:08 PM

please pm when ya get it.
mike

bagged91 · 02-06-2005, 12:29 AM

Have fun putting it on. I don't think I've ever dropped a 5/16 socket so many times as I did today putting my extra emblem on the new burb. What a PITA trying to get it out.

01-12-2005, 07:58 AM	#1
vtblazer Registered User Join Date: Oct 2003 Location: Central Vermont Posts: 8,537	Rear Door Emblem Trying to find the "chevrolet" emblem for the rear right barn door. Driver quality is fine, just something that's complete/whole with the studs intact.

01-12-2005, 04:58 PM	#4
bagged91 Out draggin' Join Date: Jan 2004 Location: Pitman,NJ Posts: 1,574	I think it is but again, not 100% positive. Anybody have any idea on how to straighten one? __________________ 91 GMC Xcab LB-Bags/bd/caddy clip SOLD 72 C10 Cheyenne Super LWB SOLD 92 GMC K1500 Burb 72 C10 Burb (ex. Cheesewagon)SOLD 72 C20 Burb parts truck 71 C10 Burb "project"

01-12-2005, 05:02 PM	#5
CPNE Resident Curmudgeon Join Date: Dec 1999 Location: NH Posts: 6,662	It is I know __________________ Currently on or near the homestead: 67 Chevy SWB 2WD stepside 350/3 on tree (Pat's) 67 GMC SWB 2WD Fleet 402/auto (Brian's under construction) 67 Chevy 3/4 ton 2WD 402/auto (Business Hauler) 67 Chevy 1 ton dually 2WD 396/4 speed (Former business hauler, Needs TLC) 68 Chevy 1/2 ton Suburban 2WD 250 six/3 on tree (Brian's Needs TLC) 70 Chevy 3/4 ton 4WD 350/4 speed (Pat's - Disguised as a 68 GMC) 71 Chevy SWB stepside (Crushed by tree - parts donor) 72 Chevy 3/4 ton 4WD (Parts donor) 72 Chevy 3/4 ton 4WD Suburban (Parts Donor) 72 GMC 3/4 ton 4WD 292 six/4 speed (Mine - Disguised as a 67 GMC) 81 GMC 4WD Dually Dump Body 350/4 speed (Business Hauler) 82 Camaro Z/28 355/Super T-10 (Pat's toy) 93 Caprice 9C1 (Brian's Cop Car) 02 Toyota Camry (Reliable but a souless steel and plastic hulk) 2011 2SS RS Camaro M6 Factory Hurst Shifter Maybe I need to sell some of this crap Yet another Bozo with a sawz-all

01-12-2005, 05:26 PM	#7
CPNE Resident Curmudgeon Join Date: Dec 1999 Location: NH Posts: 6,662	I'm still recovering from the shock of seeing that "great white" . Can't call it Ochre Winfrey now, maybe Kirstie Alley or Delta Burke? __________________ Currently on or near the homestead: 67 Chevy SWB 2WD stepside 350/3 on tree (Pat's) 67 GMC SWB 2WD Fleet 402/auto (Brian's under construction) 67 Chevy 3/4 ton 2WD 402/auto (Business Hauler) 67 Chevy 1 ton dually 2WD 396/4 speed (Former business hauler, Needs TLC) 68 Chevy 1/2 ton Suburban 2WD 250 six/3 on tree (Brian's Needs TLC) 70 Chevy 3/4 ton 4WD 350/4 speed (Pat's - Disguised as a 68 GMC) 71 Chevy SWB stepside (Crushed by tree - parts donor) 72 Chevy 3/4 ton 4WD (Parts donor) 72 Chevy 3/4 ton 4WD Suburban (Parts Donor) 72 GMC 3/4 ton 4WD 292 six/4 speed (Mine - Disguised as a 67 GMC) 81 GMC 4WD Dually Dump Body 350/4 speed (Business Hauler) 82 Camaro Z/28 355/Super T-10 (Pat's toy) 93 Caprice 9C1 (Brian's Cop Car) 02 Toyota Camry (Reliable but a souless steel and plastic hulk) 2011 2SS RS Camaro M6 Factory Hurst Shifter Maybe I need to sell some of this crap Yet another Bozo with a sawz-all

01-27-2005, 06:56 PM	#9
olblue60@aol.com member Join Date: Dec 2003 Location: Silver Spring Md.20901 Posts: 2,031	They are a tough find. Took me over a year to find one and its all pitted. I understand that they are the same as either pre 71 or 71 Chevrolet van and before for a couple of years. Then the emblem is the same on the vans for another couple of years after,except for the fact that there are only 3 mounting posts. Hope it helps. I still found them broken on everything that I found.If you find a second one in nice cond, keep me in mind.I'll probably end up painting mine black its so rough.good luck! John P.S. Still selling that rust free Blazer? __________________ 1967 C/K10 Chevy Panel 1968 C/K20 Chevy Pickup 1968 C/K10 Chevy Suburban 1941 Chevy Sedan Delivery 1960 Chevy Sedan Delivery 1972 Camaro SS 396 #s matching 1971 Harley FX Superglide

01-12-2005, 02:50 PM	#2
Florida Mike Registered User Join Date: Jul 2004 Location: Seffner, Florida Posts: 88	Is the emblem the same on a tailgate of a sub?

01-12-2005, 05:56 PM	#8
vtblazer Registered User Join Date: Oct 2003 Location: Central Vermont Posts: 8,537	Your killin' me. I know, sorry bud, had to do it. I' liked "Ochre Winfrey" too.

01-27-2005, 07:00 PM	#10
olblue60@aol.com member Join Date: Dec 2003 Location: Silver Spring Md.20901 Posts: 2,031	Bagged I think that pot metal needs to be heated to bend. Dont know how hot though. Dont melt it! I'm sure that there are people on the site that know. __________________ 1967 C/K10 Chevy Panel 1968 C/K20 Chevy Pickup 1968 C/K10 Chevy Suburban 1941 Chevy Sedan Delivery 1960 Chevy Sedan Delivery 1972 Camaro SS 396 #s matching 1971 Harley FX Superglide

01-28-2005, 12:05 AM	#11
bagged91 Out draggin' Join Date: Jan 2004 Location: Pitman,NJ Posts: 1,574	Thanks. The emblem on my 72' Parts burb is pretty decent(not a lot of pits) but has a slight bend in it from the dent above it on the gate. I haven't touched it yet. I'm hoping to get it off in one piece, straighten it and have it and the ring around the lockbutton and the handle replated someday... Attached Images __________________ 91 GMC Xcab LB-Bags/bd/caddy clip SOLD 72 C10 Cheyenne Super LWB SOLD 92 GMC K1500 Burb 72 C10 Burb (ex. Cheesewagon)SOLD 72 C20 Burb parts truck 71 C10 Burb "project"

01-28-2005, 12:30 AM	#12
Florida Mike Registered User Join Date: Jul 2004 Location: Seffner, Florida Posts: 88	There was one on a tailgate in a junkyard here a month ago it had some pitting but ill see if it will come off this weekend if you like..... mike

01-29-2005, 07:09 PM	#13
Florida Mike Registered User Join Date: Jul 2004 Location: Seffner, Florida Posts: 88	Went to the yard today...was closed. Will try again. mike

01-31-2005, 07:40 PM	#15
Florida Mike Registered User Join Date: Jul 2004 Location: Seffner, Florida Posts: 88	Went back and got it today....some pitting and a slight bend but oughta be o.k. for a driver IMHO.....pm me an address..vt blazer

01-31-2005, 09:37 PM	#16
vtblazer Registered User Join Date: Oct 2003 Location: Central Vermont Posts: 8,537	Thanks Appreciate the efforts, pm sent.

02-05-2005, 11:08 PM	#17
Florida Mike Registered User Join Date: Jul 2004 Location: Seffner, Florida Posts: 88	please pm when ya get it. mike

02-06-2005, 12:29 AM	#18
bagged91 Out draggin' Join Date: Jan 2004 Location: Pitman,NJ Posts: 1,574	Have fun putting it on. I don't think I've ever dropped a 5/16 socket so many times as I did today putting my extra emblem on the new burb. What a PITA trying to get it out. __________________ 91 GMC Xcab LB-Bags/bd/caddy clip SOLD 72 C10 Cheyenne Super LWB SOLD 92 GMC K1500 Burb 72 C10 Burb (ex. Cheesewagon)SOLD 72 C20 Burb parts truck 71 C10 Burb "project"



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.