1967 C Series Chevy Truck for sale!!! - The 1947 - Present Chevrolet & GMC Truck Message Board Network

seandaly · 01-12-2005, 11:18 AM

Got a 1967 RWD Wood bed Chevy truck that's gotta go!

250CI Straight 6, 4 speed (granny gear)

Starts, runs well, drives ok (from what I can tell, I never go more than a mile in it). I currently use it as a property truck to move some stuff around the yard. I was going to restore it but never found the time. It's a no-frills truck. No power steering, no power brakes.

Frame is great, everything works, additional springs installed in rear. Wood bed is rough, cab needs work. All electrical parts seem to work. (directionals, heater fan, wipers, etc).

Was going to donate it before 12/31 before the new tax law went into effect but decided that it would be a waste as someone here might actually restore and enjoy it.

If anyone is interested, email me and I'll send you a picture. I cannot deliver this truck so it will need to be picked up.

Any realistic offer will be considered.

Also, this truck currently does not have a title, as they are not required in NH. If a title is needed, I can have a search done but it'll take a bit of time.

The truck is in Rochester NH.

Seandaly@yahoo.com

**'70_402** · 01-12-2005, 01:06 PM

if you don't mind me asking. what book are you going by for that price??

spencra · 01-12-2005, 01:14 PM

That is a 69 or 70 model. Or a 1967 with a 69-70 front clip.

seandaly · 01-12-2005, 03:12 PM

For all I know, it could be a different year, but it was last registered as a 1967. (this was in NH, which is known for housing morons at the DMV)

Vin # CCS142B104048 (can't find a decoder to give me the year)

Also have this number on the plate in the glovebox: CS10704

From what I can tell, that means 1/2 ton, C10, Step-side 6.5ft bed.

Doesn't help with year very much.

Anyone have any ideas where I can find the year (either by VIN or searching elsewhere on the truck?)

I was looking at Kelly blue book and that price was the middle range for a 1967 C10 shortbed Pickup, I6 4spd. Not what it's worth, but what I may have been able to write off if donated.

spencra · 01-12-2005, 03:20 PM

Quote:

Originally Posted by seandaly

For all I know, it could be a different year, but it was last registered as a 1967. (this was in NH, which is known for housing morons at the DMV)

Vin # CCS142B104048 (can't find a decoder to give me the year)

Also have this number on the plate in the glovebox: CS10704

From what I can tell, that means 1/2 ton, C10, Step-side 6.5ft bed.

Doesn't help with year very much.

Anyone have any ideas where I can find the year (either by VIN or searching elsewhere on the truck?)

I was looking at Kelly blue book and that price was the middle range for a 1967 C10 shortbed Pickup, I6 4spd. Not what it's worth, but what I may have been able to write off if donated.

DMV employees in CT aren't much different.
Here is some production info:

1967
1/2-Ton Commercial - Model C/Series 10 - 115-in. w.b
MODEL BODY TYPE PRICE WEIGHT PROD.TOTAL
CS10703 Chassis & Cab 2223 2914 2790
CS10734 Fleetside 6.5ft 2371 3333 43940
CS10704 Step-Side 6.5ft 2333 3255 45606

Looks like somebody swapped out the front clip at some point. Also converted it from a stepside to a stakebody.

seandaly · 01-12-2005, 04:14 PM

Judging all of the decoders out there, it seems that the cab (at least) is a 1972.

Going by the 6th digit of the VIN, which is 2.

I could be very wrong here...

Would there be a VIN on the side of the block that I could grab?

Anywhere else that I could locate the year?

I could part this thing out, but I'd be more likely to just sell it locally to someone else wanting a property truck. I don't really have the time to strip it down.

If over the next week or so, no one here ends up wanting it, I might stick it on ebay for a week. If I don't see someone there wanting to restore it (or take it to part it out for another resto), I'll put it at the end of the driveway with a for-sale sign on it.

I'd really hate to see this truck stripped or parted out... The frame is good and the engine is still strong. I'd rather see someone move hay or stones around on thier farm with it as I do.

Sean

**CPNE** · 01-12-2005, 04:33 PM

what is your asking price?

spencra · 01-12-2005, 04:39 PM

According to the code on your glove box door it is a 67. Of course the glove box door also could have been replaced with a different one. The sure way to tell is to decode the VIN plate on the cab. That is what the DMV will go by anyway. I wouldn't go by the block # either because that could easily have been switched at some point also.

spencra · 01-12-2005, 04:45 PM

Quote:

Originally Posted by CPNE

what is your asking price?

I'd like to know too. If you don't have an idea as to what to ask for I really wouldn't go by Kelly Blue book. You have to take into account all the options, how original the truck is, and of course the condition. This is purely an opinion of course, but from what I can see from the pic, your description and comparing it to prices of other trucks that I have seen in similar condition, I would say anywhere from the $1000-$1500 range. That is from what I could see. Because the truck has no desireable options, at least none that you have mentioned it could be less. If it has the desireable options it could run a little more.

**special-K** · 01-12-2005, 11:14 PM

Don`t think there`s a book quote for a peiced together truck,no offense.You`d have done well to donated for $5000.

seandaly · 01-12-2005, 11:24 PM

Don't really care about what it's worth in a book...

Just curious if anyone here wants the truck.

It's worth either what a running truck is worth, or what the parts are worth, and I don't want to strip the parts.

seandaly · 01-13-2005, 04:29 PM

Also might want to note that the odometer claims 51814 miles.

I know that this has probably turned over at least once... The seller swore to me (and put it in the bill of sale) that the odometer statement was true, but I'm not sure if NH actually has tough odometer statement laws.

stllookn · 01-13-2005, 04:37 PM

The PO was right...the odometer is incapable of lying...LOL! It could have rolled over 5 times...it just can't tell you that...neither can he unfortunately!

**CPNE** · 01-13-2005, 04:54 PM

I'd rather you set the price and go from there. If it's within reason I may be interested. I've bought 40 or so of these trucks and know pretty much what it's worth to me, but I don't want to insult anybody with what may be a lowball offer. FYI that 1 ton I pictured had an asking price was $2000 and I managed to get it for $1200. It is a BB truck that had current tags and inspection, with the majority of the rust issues dealt with.

You can personal message me with your asking price if you'd like.

01-12-2005, 11:18 AM	#1
seandaly Registered User Join Date: Apr 2004 Posts: 10	1967 C Series Chevy Truck for sale!!! (New oversized pics) Got a 1967 RWD Wood bed Chevy truck that's gotta go! 250CI Straight 6, 4 speed (granny gear) Starts, runs well, drives ok (from what I can tell, I never go more than a mile in it). I currently use it as a property truck to move some stuff around the yard. I was going to restore it but never found the time. It's a no-frills truck. No power steering, no power brakes. Frame is great, everything works, additional springs installed in rear. Wood bed is rough, cab needs work. All electrical parts seem to work. (directionals, heater fan, wipers, etc). Was going to donate it before 12/31 before the new tax law went into effect but decided that it would be a waste as someone here might actually restore and enjoy it. If anyone is interested, email me and I'll send you a picture. I cannot deliver this truck so it will need to be picked up. Any realistic offer will be considered. Also, this truck currently does not have a title, as they are not required in NH. If a title is needed, I can have a search done but it'll take a bit of time. The truck is in Rochester NH. Seandaly@yahoo.com Last edited by seandaly; 01-14-2005 at 02:54 PM. Reason: Add picture

01-12-2005, 01:06 PM	#2
'70_402 Senior Member Join Date: Dec 2003 Location: Pampa, Texas Posts: 1,553	if you don't mind me asking. what book are you going by for that price?? __________________ https://www.ebay.com/itm/29620574751...mis&media=COPY

01-12-2005, 01:14 PM	#3
spencra This, is my BOOMSTICK! Join Date: Oct 2003 Location: Berlin, CT Posts: 1,310	That is a 69 or 70 model. Or a 1967 with a 69-70 front clip. __________________ Larry Got rid of my projects for now. 1980 Jeep CJ7 1998 Nissan Sentra (my car) 2001 Toyota Sienna (wife's, of course)

01-12-2005, 03:12 PM	#4
seandaly Registered User Join Date: Apr 2004 Posts: 10	Front clip may well have been replaced. For all I know, it could be a different year, but it was last registered as a 1967. (this was in NH, which is known for housing morons at the DMV) Vin # CCS142B104048 (can't find a decoder to give me the year) Also have this number on the plate in the glovebox: CS10704 From what I can tell, that means 1/2 ton, C10, Step-side 6.5ft bed. Doesn't help with year very much. Anyone have any ideas where I can find the year (either by VIN or searching elsewhere on the truck?) I was looking at Kelly blue book and that price was the middle range for a 1967 C10 shortbed Pickup, I6 4spd. Not what it's worth, but what I may have been able to write off if donated.

01-12-2005, 04:14 PM	#6
seandaly Registered User Join Date: Apr 2004 Posts: 10	The VIN # makes me want to believe that it's a 1972 Judging all of the decoders out there, it seems that the cab (at least) is a 1972. Going by the 6th digit of the VIN, which is 2. I could be very wrong here... Would there be a VIN on the side of the block that I could grab? Anywhere else that I could locate the year? I could part this thing out, but I'd be more likely to just sell it locally to someone else wanting a property truck. I don't really have the time to strip it down. If over the next week or so, no one here ends up wanting it, I might stick it on ebay for a week. If I don't see someone there wanting to restore it (or take it to part it out for another resto), I'll put it at the end of the driveway with a for-sale sign on it. I'd really hate to see this truck stripped or parted out... The frame is good and the engine is still strong. I'd rather see someone move hay or stones around on thier farm with it as I do. Sean

01-12-2005, 04:33 PM	#7
CPNE Resident Curmudgeon Join Date: Dec 1999 Location: NH Posts: 6,662	what is your asking price? __________________ Currently on or near the homestead: 67 Chevy SWB 2WD stepside 350/3 on tree (Pat's) 67 GMC SWB 2WD Fleet 402/auto (Brian's under construction) 67 Chevy 3/4 ton 2WD 402/auto (Business Hauler) 67 Chevy 1 ton dually 2WD 396/4 speed (Former business hauler, Needs TLC) 68 Chevy 1/2 ton Suburban 2WD 250 six/3 on tree (Brian's Needs TLC) 70 Chevy 3/4 ton 4WD 350/4 speed (Pat's - Disguised as a 68 GMC) 71 Chevy SWB stepside (Crushed by tree - parts donor) 72 Chevy 3/4 ton 4WD (Parts donor) 72 Chevy 3/4 ton 4WD Suburban (Parts Donor) 72 GMC 3/4 ton 4WD 292 six/4 speed (Mine - Disguised as a 67 GMC) 81 GMC 4WD Dually Dump Body 350/4 speed (Business Hauler) 82 Camaro Z/28 355/Super T-10 (Pat's toy) 93 Caprice 9C1 (Brian's Cop Car) 02 Toyota Camry (Reliable but a souless steel and plastic hulk) 2011 2SS RS Camaro M6 Factory Hurst Shifter Maybe I need to sell some of this crap Yet another Bozo with a sawz-all

01-12-2005, 04:39 PM	#8
spencra This, is my BOOMSTICK! Join Date: Oct 2003 Location: Berlin, CT Posts: 1,310	According to the code on your glove box door it is a 67. Of course the glove box door also could have been replaced with a different one. The sure way to tell is to decode the VIN plate on the cab. That is what the DMV will go by anyway. I wouldn't go by the block # either because that could easily have been switched at some point also. __________________ Larry Got rid of my projects for now. 1980 Jeep CJ7 1998 Nissan Sentra (my car) 2001 Toyota Sienna (wife's, of course)

01-12-2005, 11:14 PM	#10
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,851	Don`t think there`s a book quote for a peiced together truck,no offense.You`d have done well to donated for $5000. __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

01-12-2005, 11:24 PM	#11
seandaly Registered User Join Date: Apr 2004 Posts: 10	Blue book. Don't really care about what it's worth in a book... Just curious if anyone here wants the truck. It's worth either what a running truck is worth, or what the parts are worth, and I don't want to strip the parts.

01-13-2005, 04:29 PM	#12
seandaly Registered User Join Date: Apr 2004 Posts: 10	Not that I believe it but... Also might want to note that the odometer claims 51814 miles. I know that this has probably turned over at least once... The seller swore to me (and put it in the bill of sale) that the odometer statement was true, but I'm not sure if NH actually has tough odometer statement laws.

01-13-2005, 04:37 PM	#13
stllookn Saving 1 truck at a time! Join Date: Aug 2001 Location: Kent, WA Posts: 6,465	The PO was right...the odometer is incapable of lying...LOL! It could have rolled over 5 times...it just can't tell you that...neither can he unfortunately! __________________ '68 C20 Longhorn 50th Anniversary 400/TH400 '68 C20 Longhorn 50th Anniversary 468/TH400w/buckets '72 C20 Halfhorn (Longhorn w/o cab and front clip) '69 Flxible Cruiser (look up ugly in the dictionary)

01-13-2005, 04:54 PM	#14
CPNE Resident Curmudgeon Join Date: Dec 1999 Location: NH Posts: 6,662	I'd rather you set the price and go from there. If it's within reason I may be interested. I've bought 40 or so of these trucks and know pretty much what it's worth to me, but I don't want to insult anybody with what may be a lowball offer. FYI that 1 ton I pictured had an asking price was $2000 and I managed to get it for $1200. It is a BB truck that had current tags and inspection, with the majority of the rust issues dealt with. You can personal message me with your asking price if you'd like. __________________ Currently on or near the homestead: 67 Chevy SWB 2WD stepside 350/3 on tree (Pat's) 67 GMC SWB 2WD Fleet 402/auto (Brian's under construction) 67 Chevy 3/4 ton 2WD 402/auto (Business Hauler) 67 Chevy 1 ton dually 2WD 396/4 speed (Former business hauler, Needs TLC) 68 Chevy 1/2 ton Suburban 2WD 250 six/3 on tree (Brian's Needs TLC) 70 Chevy 3/4 ton 4WD 350/4 speed (Pat's - Disguised as a 68 GMC) 71 Chevy SWB stepside (Crushed by tree - parts donor) 72 Chevy 3/4 ton 4WD (Parts donor) 72 Chevy 3/4 ton 4WD Suburban (Parts Donor) 72 GMC 3/4 ton 4WD 292 six/4 speed (Mine - Disguised as a 67 GMC) 81 GMC 4WD Dually Dump Body 350/4 speed (Business Hauler) 82 Camaro Z/28 355/Super T-10 (Pat's toy) 93 Caprice 9C1 (Brian's Cop Car) 02 Toyota Camry (Reliable but a souless steel and plastic hulk) 2011 2SS RS Camaro M6 Factory Hurst Shifter Maybe I need to sell some of this crap Yet another Bozo with a sawz-all



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.