4 spd tilt - The 1947 - Present Chevrolet & GMC Truck Message Board Network

71/454 · 01-15-2005, 09:54 PM

Hey, I was wondering what the availability and pricing is like for a tilt column for a 4speed on the floor truck. are they common to come across used and if anybody has an idea of price and or where to get one thanks alot.

**PICKMUP** · 01-15-2005, 10:36 PM

A good used one will sell for about $300...a newly built OEM/stock $400+. Look at a new Flaming River like this. The quality is much better than OEM and looks real close.

71/454 · 01-18-2005, 02:27 PM

Thanks I'll check them out!

Deuce · 01-18-2005, 06:12 PM

Sent you a PM 71/454

*Gee_Emm* · 01-18-2005, 11:52 PM

http://cgi.ebay.com/ebaymotors/ws/eB...category=42606

**Yukon Jack** · 01-19-2005, 12:16 PM

Quote:

Originally Posted by Gee_Emm

http://cgi.ebay.com/ebaymotors/ws/eB...category=42606

Bidding ended at $731

Staceydude · 01-19-2005, 12:04 AM

I found some Ididit tilt columns for standard shift for $285.00 shipped.

These are the steel ones, not polished.

I figure for the price why not ust get one of them instead of dropping a bunch of money on an original that probably needs rebuilt. Of course not original but at least it gives a fat guy like me more "room"

Of course I will investigate more and look into the Flaming river.

Anyone have any experience with either?

Regards,

Stace

junkyardjohn · 01-19-2005, 12:26 PM

Quote:

Originally Posted by Staceydude

I found some Ididit tilt columns for standard shift for $285.00 shipped.

These are the steel ones, not polished.

I figure for the price why not ust get one of them instead of dropping a bunch of money on an original that probably needs rebuilt. Of course not original but at least it gives a fat guy like me more "room"
Regards,
Stace

I'VE GOT AN I-DIDIT FLOOR SHIFT TILT COLLUMN THAT I BOUGHT FOR AROUND $300 (STEEL - NOT POLISHED) . ORIGINALITY DOESN'T MATTER TO ME, SO THIS MADE A WHOLE LOT MORE SENSE TO ME THAN SHELLING OUT $300 (OR $731) FOR A USED ONE. I HAVEN'T GOT THIS PROJECT ON THE ROAD YET, BUT IT SURE LOOKS GOOD.

JOHN

arkracing · 01-19-2005, 05:49 PM

I feel better about the one I bought off of Jose.
$731 - wow that is alot of money

Jwill41 · 01-19-2005, 08:16 PM

whoa, i wish i had a few of those laying around.

**special-K** · 01-20-2005, 08:27 AM

Factory 4spd tilt:Rare.

01-15-2005, 09:54 PM	#1
71/454 Turbo Guy Join Date: Jan 2005 Location: Calgary Alberta Posts: 353	4 spd tilt Hey, I was wondering what the availability and pricing is like for a tilt column for a 4speed on the floor truck. are they common to come across used and if anybody has an idea of price and or where to get one thanks alot.

01-15-2005, 10:36 PM	#2
PICKMUP "Trucks with Class" Join Date: Jul 2000 Location: OLYMPIA, WA, USA Posts: 8,158	A good used one will sell for about $300...a newly built OEM/stock $400+. Look at a new Flaming River like this. The quality is much better than OEM and looks real close. Attached Images __________________ Email: frankeham@comcast.net Phone: 360-956-7170 Last edited by PICKMUP; 01-15-2005 at 10:39 PM.

01-18-2005, 06:12 PM	#4
Deuce Registered User Join Date: Apr 2004 Location: Calgary, Alberta,Canada Posts: 1,595	Sent you a PM 71/454 __________________ I know what your thinking.......I have ESPN. Sometimes it's easier to do things the hard way. Fesler Built 1968 Chevy C10....Must resist the urge to mess with it!!

01-19-2005, 12:04 AM	#7
Staceydude Registered User Join Date: Jun 2004 Location: DFW Area Texas Posts: 436	I found some Ididit tilt columns for standard shift for $285.00 shipped. These are the steel ones, not polished. I figure for the price why not ust get one of them instead of dropping a bunch of money on an original that probably needs rebuilt. Of course not original but at least it gives a fat guy like me more "room" Of course I will investigate more and look into the Flaming river. Anyone have any experience with either? Regards, Stace Last edited by Staceydude; 01-19-2005 at 12:12 AM.

01-19-2005, 05:49 PM	#9
arkracing Weekend Warrior Join Date: Oct 2004 Location: CT Posts: 1,787	I feel better about the one I bought off of Jose. $731 - wow that is alot of money __________________ -'07 GMC Sierra K2500HD -'66 C10 Suburban -'68/'71 K20 Service Bed Project -'69 Chevy C30 Mason Dump -'33Ford P/U 396ChevyPowered

01-18-2005, 02:27 PM	#3
71/454 Turbo Guy Join Date: Jan 2005 Location: Calgary Alberta Posts: 353	Thanks I'll check them out!

01-18-2005, 11:52 PM	#5
Gee_Emm Account Suspended Join Date: Sep 2000 Posts: 3,991	http://cgi.ebay.com/ebaymotors/ws/eB...category=42606

01-19-2005, 08:16 PM	#10
Jwill41 Registered User Join Date: Aug 2002 Location: Farmers Branch, Tx Posts: 1,009	whoa, i wish i had a few of those laying around. __________________ http://www.picturetrail.com/jwill41 67 1/2 ton GMC short step side 68 1/2 ton Chevy long fleet side 72 1/2 ton Chevy Suburban 99 1/2 ton Chevy Suburban founder (and only member) of the primer/clearcoat club

01-20-2005, 08:27 AM	#11
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,851	Factory 4spd tilt:Rare. __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.