Complete 79 front clip from Burban - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Staceydude · 01-26-2005, 11:41 PM

Hey All,

We finally got the motor out of the Burban,

We pulled the front clip off as one unit so I am going to offer it here for sale.

This is basicall the entire front clip still bolted together.

Both front fenders are in really good shape.

The core support has the standard rust under the battery.

It has the headlights in it that work

Grill has some good headlight trim and there is a good dent or two in the grill surround. The bumper would be driver quality, few spots here and there dinged or dented.

The Battery tray is there and has some rust on it but still holds well and does not look terrible.

The hood has the standard 70 chevy hood rust along the front edge.

I will start this at $150.00 OBO.

I have to go to Houston area this weekend to pick up a shortbed frame so I could deliver it along the way

I will also trade this for

BBC or SBC parts.... 67-72 parts.... Tools... Stereo...

Whatever..... you may have.

I will post pics on the thread tomorrow evening. And as said will deliver along the route to Houston on Saturday so if you want it let me know.

I have soem other parts if you are interested PM me with what you need.

Best regards,

Stace

*Hot Rod Willy* · 01-26-2005, 11:51 PM

what else you got for this?

*Hot Rod Willy* · 01-26-2005, 11:53 PM

Also any 73-87 truck parts? p/m me lets chat

Staceydude · 01-27-2005, 01:10 AM

Hey Willy,

I sent you a PM.

Will get the pics up as long as I get home from work before dark.

Regards,

Stacey

79BIG10 · 01-27-2005, 01:37 AM

Do you have a 12 bolt rear from the truck? I'm looking for a rear axle and may haev some BBC parts you may need soon in my possesion.

Staceydude · 01-27-2005, 11:15 AM

I do have the 12 bolt. I may need to useit but will not knows until after this weekend.

I will put you onto it first if I do not use it.

It is a good 12 bolt and I think it is a posi unit. The burb is a trailering special and has some huge leaf springs on it as well. plus the big back brakes.

Regards,

Stacey

79BIG10 · 01-27-2005, 02:43 PM

Thanks Stacey. Let me know once you decide and if you don't use it can you let me know the gearing on it?

Staceydude · 01-27-2005, 06:01 PM

Quote:

Originally Posted by 79BIG10

Thanks Stacey. Let me know once you decide and if you don't use it can you let me know the gearing on it?

Any idea what kind of BBC parts you may have?

It is raining like a dog here. If I get brave I will scoot under the burb to look over the rear end and post up the ratio and posi info.

Regards,

Stace

79BIG10 · 01-31-2005, 12:55 AM

Quote:

Originally Posted by Staceydude

Any idea what kind of BBC parts you may have?

It is raining like a dog here. If I get brave I will scoot under the burb to look over the rear end and post up the ratio and posi info.

Regards,

Stace

Stacey- I've got a 360? BBC out of a big truck. It's complete from intake to bottom pan minus the valve covers. I'm using the block and 4 pistons and rods for another project. The heads, intake, crank, other misc parts. are not going to be used.

On the axle the gearing would be great if they were 3.73 but if not you can keep the guts as I have a 3.73 gear setup with gov-loc. I just need a donor axle for me to get resetup and then get rebuilt drum to drum for fresh axle.

79BIG10 · 02-01-2005, 07:58 PM

Any luck Stacey?

Staceydude · 01-27-2005, 05:48 PM

Note the front of the hood again has some rust.

Also note on the pics of the left front grill the dent in the grill.

Staceydude · 01-27-2005, 05:52 PM

Dashpad and tilt column with key if anyone is interested.

Dashpad has a couple of cracks by the speaker but otherwise is pretty nice.

Tilt column is very tight without the wheel or with if I have another one in the closet.

Staceydude · 01-27-2005, 05:58 PM

Oh... The front bumper while not perfect is better than I thought it was. In the above pics you can see it pretty good.

Regards,

Stace

Jonboy · 01-27-2005, 07:20 PM

seems like it was a 3.40 ratio rear.

Staceydude · 01-27-2005, 08:19 PM

Hey Jon,

Could be, I just went for a walk outside and I am to much of a wimp to crawl under it in this weather (don't laugh dudes from up north... I am Texas climatized).

May have to drain it and pull the cover to see if it is a Posi and for sure on the gears.

Best regards,

Stacey

f.monroe · 01-27-2005, 08:49 PM

If I remember correctly, 3.40 was what was listed on the tag in the glove box .Seems like you got some good use out of the Sub. Big block still running good?.Frank

Staceydude · 01-27-2005, 08:58 PM

Hey Frank,

Still ran like a champ when pulled. I drove that thing all over the metroplex numerous times without a hitch.

Ran great.

Best regards,

Stacey

76HighSierra · 01-28-2005, 01:05 AM

I got dibs on those wheel centers, if you arent using them.

cib101abn · 01-28-2005, 09:51 AM

PM sent

low 84 · 01-28-2005, 10:51 AM

how much for the dash pad and tilt w/wheel?

thanks

Staceydude · 01-28-2005, 11:28 AM

Dash pad I will sell cheap since it has the cracks.... How about $25.00 OBO

The tilt column with key and padded wheel I will sell for $105.00 OBO if I have the extra wheel at my house. Without the wheel I would sell it for $85.00 OBO

Let me know asap if this will work as I am heading to Houston tomorrow morning.

We can meet somewhere near there. I am heading to Rosenburg early early.

Let me know. This would save shipping charges and be easier on all of us.

Regards,

Stacey

Staceydude · 01-28-2005, 12:12 PM

The front clip may be spoken for as well as the dash pad.

Regards,

Stacey

Staceydude · 01-28-2005, 06:02 PM

If I have not gotten back with you about a part you want in Houston area let me know asap.

Thanks

Stacey

low 84 · 01-28-2005, 09:36 PM

i'd like to get that dash pad, but i'll be working all day tommorow and won't be able to get to the houston area. if you still have it when you get back let me know how shipping would be. thanks

Staceydude · 01-28-2005, 09:43 PM

The dash pad and front clip are spoken for.

I still have the column left and some other parts I have not listed.

I pulled the column this evening and it is in very good shape. I will leave the wheel on it as I found my other wheel which was given to me by a friend. It has the keys in it etc. The shifter handle has some surface rust on it but the rest of it is nice. The tilt is very tight and the blinkers cancel and everything.

Low 84, I am actually driving right through Bryan tomorrow morning. So if you are interested in the tilt with wheel make an offer. I will bring it with me.

I will PM you my cell number.

Regards,

Stacey

01-26-2005, 11:41 PM	#1
Staceydude Registered User Join Date: Jun 2004 Location: DFW Area Texas Posts: 436	Complete 79 front clip from Burban Hey All, We finally got the motor out of the Burban, We pulled the front clip off as one unit so I am going to offer it here for sale. This is basicall the entire front clip still bolted together. Both front fenders are in really good shape. The core support has the standard rust under the battery. It has the headlights in it that work Grill has some good headlight trim and there is a good dent or two in the grill surround. The bumper would be driver quality, few spots here and there dinged or dented. The Battery tray is there and has some rust on it but still holds well and does not look terrible. The hood has the standard 70 chevy hood rust along the front edge. I will start this at $150.00 OBO. I have to go to Houston area this weekend to pick up a shortbed frame so I could deliver it along the way I will also trade this for BBC or SBC parts.... 67-72 parts.... Tools... Stereo... Whatever..... you may have. I will post pics on the thread tomorrow evening. And as said will deliver along the route to Houston on Saturday so if you want it let me know. I have soem other parts if you are interested PM me with what you need. Best regards, Stace

01-27-2005, 01:37 AM	#5
79BIG10 I'm back with 2nd truck! Join Date: Feb 2002 Location: Texas Posts: 3,774	Do you have a 12 bolt rear from the truck? I'm looking for a rear axle and may haev some BBC parts you may need soon in my possesion. __________________ 1979 Chevrolet Bonanza Big10 "Tootsie Roll" 1985 Chevrolet Silverado (wife's) Member of the Southern Bowties Club "Don't underestimate how sexy a fat man who drinks to excess can be." Homer Simpson

01-27-2005, 02:43 PM	#7
79BIG10 I'm back with 2nd truck! Join Date: Feb 2002 Location: Texas Posts: 3,774	Thanks Stacey. Let me know once you decide and if you don't use it can you let me know the gearing on it? __________________ 1979 Chevrolet Bonanza Big10 "Tootsie Roll" 1985 Chevrolet Silverado (wife's) Member of the Southern Bowties Club "Don't underestimate how sexy a fat man who drinks to excess can be." Homer Simpson

02-01-2005, 07:58 PM	#10
79BIG10 I'm back with 2nd truck! Join Date: Feb 2002 Location: Texas Posts: 3,774	Any luck Stacey? __________________ 1979 Chevrolet Bonanza Big10 "Tootsie Roll" 1985 Chevrolet Silverado (wife's) Member of the Southern Bowties Club "Don't underestimate how sexy a fat man who drinks to excess can be." Homer Simpson

01-27-2005, 05:48 PM	#11
Staceydude Registered User Join Date: Jun 2004 Location: DFW Area Texas Posts: 436	Here are some pics of the front clip Note the front of the hood again has some rust. Also note on the pics of the left front grill the dent in the grill. Attached Images

01-26-2005, 11:51 PM	#2
Hot Rod Willy No longer a Member Join Date: Dec 2004 Location: Oklahoma Posts: 130	what else you got for this?

01-26-2005, 11:53 PM	#3
Hot Rod Willy No longer a Member Join Date: Dec 2004 Location: Oklahoma Posts: 130	Also any 73-87 truck parts? p/m me lets chat

01-27-2005, 01:10 AM	#4
Staceydude Registered User Join Date: Jun 2004 Location: DFW Area Texas Posts: 436	Hey Willy, I sent you a PM. Will get the pics up as long as I get home from work before dark. Regards, Stacey

01-27-2005, 11:15 AM	#6
Staceydude Registered User Join Date: Jun 2004 Location: DFW Area Texas Posts: 436	I do have the 12 bolt. I may need to useit but will not knows until after this weekend. I will put you onto it first if I do not use it. It is a good 12 bolt and I think it is a posi unit. The burb is a trailering special and has some huge leaf springs on it as well. plus the big back brakes. Regards, Stacey

01-27-2005, 05:52 PM	#12
Staceydude Registered User Join Date: Jun 2004 Location: DFW Area Texas Posts: 436	Dashpad and tilt column with key if anyone is interested Dashpad and tilt column with key if anyone is interested. Dashpad has a couple of cracks by the speaker but otherwise is pretty nice. Tilt column is very tight without the wheel or with if I have another one in the closet. Attached Images

01-27-2005, 05:58 PM	#13
Staceydude Registered User Join Date: Jun 2004 Location: DFW Area Texas Posts: 436	Oh... The front bumper while not perfect is better than I thought it was. In the above pics you can see it pretty good. Regards, Stace

01-27-2005, 07:20 PM	#14
Jonboy Slots go on anything! Join Date: May 2003 Location: Richardson, TX Posts: 5,957	seems like it was a 3.40 ratio rear. __________________ 1974 Jimmy- 5.3/4L80e/NP241

01-27-2005, 08:19 PM	#15
Staceydude Registered User Join Date: Jun 2004 Location: DFW Area Texas Posts: 436	Hey Jon, Could be, I just went for a walk outside and I am to much of a wimp to crawl under it in this weather (don't laugh dudes from up north... I am Texas climatized). May have to drain it and pull the cover to see if it is a Posi and for sure on the gears. Best regards, Stacey

01-27-2005, 08:49 PM	#16
f.monroe Senior Member Join Date: May 2004 Location: Caldwell,Tx. Posts: 3,648	Rear If I remember correctly, 3.40 was what was listed on the tag in the glove box .Seems like you got some good use out of the Sub. Big block still running good?.Frank

01-27-2005, 08:58 PM	#17
Staceydude Registered User Join Date: Jun 2004 Location: DFW Area Texas Posts: 436	Hey Frank, Still ran like a champ when pulled. I drove that thing all over the metroplex numerous times without a hitch. Ran great. Best regards, Stacey



Register or Log In To remove these advertisements.

01-28-2005, 01:05 AM	#18
76HighSierra DAMN, I love Big Blocks! Join Date: Aug 2003 Location: New Mexico, USA Posts: 619	I got dibs on those wheel centers, if you arent using them. __________________ Marc Bona Hobbs, New Mexico 1976 1/2 ton GMC High Sierra. 454 c.i.d./ TH400. *Soon to get a mild warming over.* 3.40 rear.

01-28-2005, 09:51 AM	#19
cib101abn Screaming Eagle Join Date: Oct 2004 Location: SW of Houston Posts: 288	PM sent __________________ "Basic Research is what I am doing when I don't know what I am doing." Dr. Werner VonBraun (Rocket Scientist) Contributing Member 79 GMC SWB w/402 79 Chev SWB w400 sm blk being built remnants of 72 Cheyenne (selling)

01-28-2005, 10:51 AM	#20
low 84 Registered User Join Date: Jan 2002 Location: Houston, TX Posts: 2,144	how much for the dash pad and tilt w/wheel? thanks __________________ '51 F100, backhalf with a narrowed 9 and coil overs, 18.5" mickeys, monte front clip, +400" sbc in the works '05 1500 Crew Cab RIP '84 swb 5/7 drop, solid cammed 408 w/ fully ported dart heads, th350 w/ 10 inch hughes, 12 bolt w/ 3.73 richmonds and a locker '80 swb 4x4 in progress: 7" lift, 350 th350/np205, d44 and 1.5" ORD tie rod, 14BFF w/discs , armored diff covers, 40" MTR's

01-28-2005, 11:28 AM	#21
Staceydude Registered User Join Date: Jun 2004 Location: DFW Area Texas Posts: 436	Dash pad I will sell cheap since it has the cracks.... How about $25.00 OBO The tilt column with key and padded wheel I will sell for $105.00 OBO if I have the extra wheel at my house. Without the wheel I would sell it for $85.00 OBO Let me know asap if this will work as I am heading to Houston tomorrow morning. We can meet somewhere near there. I am heading to Rosenburg early early. Let me know. This would save shipping charges and be easier on all of us. Regards, Stacey

01-28-2005, 12:12 PM	#22
Staceydude Registered User Join Date: Jun 2004 Location: DFW Area Texas Posts: 436	The front clip may be spoken for as well as the dash pad. Regards, Stacey

01-28-2005, 06:02 PM	#23
Staceydude Registered User Join Date: Jun 2004 Location: DFW Area Texas Posts: 436	If I have not gotten back with you about a part you want in Houston area let me know asap. Thanks Stacey Last edited by Staceydude; 01-28-2005 at 06:06 PM.

01-28-2005, 09:36 PM	#24
low 84 Registered User Join Date: Jan 2002 Location: Houston, TX Posts: 2,144	i'd like to get that dash pad, but i'll be working all day tommorow and won't be able to get to the houston area. if you still have it when you get back let me know how shipping would be. thanks __________________ '51 F100, backhalf with a narrowed 9 and coil overs, 18.5" mickeys, monte front clip, +400" sbc in the works '05 1500 Crew Cab RIP '84 swb 5/7 drop, solid cammed 408 w/ fully ported dart heads, th350 w/ 10 inch hughes, 12 bolt w/ 3.73 richmonds and a locker '80 swb 4x4 in progress: 7" lift, 350 th350/np205, d44 and 1.5" ORD tie rod, 14BFF w/discs , armored diff covers, 40" MTR's

01-28-2005, 09:43 PM	#25
Staceydude Registered User Join Date: Jun 2004 Location: DFW Area Texas Posts: 436	The dash pad and front clip are spoken for. I still have the column left and some other parts I have not listed. I pulled the column this evening and it is in very good shape. I will leave the wheel on it as I found my other wheel which was given to me by a friend. It has the keys in it etc. The shifter handle has some surface rust on it but the rest of it is nice. The tilt is very tight and the blinkers cancel and everything. Low 84, I am actually driving right through Bryan tomorrow morning. So if you are interested in the tilt with wheel make an offer. I will bring it with me. I will PM you my cell number. Regards, Stacey

Register or Log In To remove these advertisements.