Attaching fender emblems? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Custom 68 · 01-30-2005, 10:01 PM

I dont think I can reattach the fender emblems on my 68 with the fenders installed. How have you "attached" them Glue, epoxy douple sided tape or what.
Thanks
Dave

*Randy70C-10* · 01-30-2005, 10:21 PM

The correct way would be to pull the inner fender wells out the get to the studs but you can use double sided tape.

**southern parts** · 01-30-2005, 10:32 PM

You can use a barrel clip. Maybe some of the venders carry them. If not check with your local auto paint and body store.

Longhorn Man · 01-30-2005, 10:57 PM

Personally, i've always used 3M emblim adhesive. Never had a problem yet.

jhow66 · 01-31-2005, 12:01 AM

NAPA carries barrel clips--have them on my fender badges.

Custom 68 · 01-31-2005, 10:11 AM

I will do some checking on the barrel clips. The inner fenders are out but there is just not quite enough room to get in there. I had left the inner fenders off because I thought there was more room but it is tight.
Thanks
Dave

01-30-2005, 10:01 PM	#1
Custom 68 Registered User Join Date: Nov 2001 Location: Springfield, MO Posts: 2,939	Attaching fender emblems? I dont think I can reattach the fender emblems on my 68 with the fenders installed. How have you "attached" them Glue, epoxy douple sided tape or what. Thanks Dave __________________ Dave 1968 Custom Chevy with turbo charged 5.3 gen III 4l80e swap 1967-71 GMC 3/4 ton long step 4x4 (not sure what year exactly?) "A good friend will bail you out of jail...but a true friend will be sitting next to you saying "that was frekin awesome". "If it doesn't fit force it...If it breaks then it needed to be replaced anyway!"

01-31-2005, 12:01 AM	#5
jhow66 Registered User Join Date: Jun 2002 Location: Knoxville Tenn. Posts: 3,058	NAPA carries barrel clips--have them on my fender badges. __________________ 56 Chevy Bel-Air 2dr. HT (purchased new) 71 Chevy Cheyenne SWB PU (502HO) 65 GMC short bed step--work in progress and my gofer

01-31-2005, 10:11 AM	#6
Custom 68 Registered User Join Date: Nov 2001 Location: Springfield, MO Posts: 2,939	I will do some checking on the barrel clips. The inner fenders are out but there is just not quite enough room to get in there. I had left the inner fenders off because I thought there was more room but it is tight. Thanks Dave __________________ Dave 1968 Custom Chevy with turbo charged 5.3 gen III 4l80e swap 1967-71 GMC 3/4 ton long step 4x4 (not sure what year exactly?) "A good friend will bail you out of jail...but a true friend will be sitting next to you saying "that was frekin awesome". "If it doesn't fit force it...If it breaks then it needed to be replaced anyway!"

01-30-2005, 10:21 PM	#2
Randy70C-10 Account Suspended Join Date: Mar 2001 Location: Virginia Beach, Va. U.S.A. Posts: 15,320	The correct way would be to pull the inner fender wells out the get to the studs but you can use double sided tape.

01-30-2005, 10:32 PM	#3
southern parts Senior Member Join Date: Apr 2003 Location: Elberton Ga. Posts: 3,472	You can use a barrel clip. Maybe some of the venders carry them. If not check with your local auto paint and body store.

01-30-2005, 10:57 PM	#4
Longhorn Man its all about the +6 inches Join Date: Jan 2001 Location: Hilliard Ohio Posts: 2,690	Personally, i've always used 3M emblim adhesive. Never had a problem yet.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.