To good to be true..... - The 1947 - Present Chevrolet & GMC Truck Message Board Network

firemanchuck · 02-05-2005, 04:59 PM

I am the new owner of a 1972 gmc blazer 4x4. I wanted a chevy but this was one hell of a deal. Te body is in decent shape minus the usual rust spots. Ipaid $600.00 bucks for this thing and it actually runs, 4-wheel drive even works. The hard top is in pretty bad shape though. Is they're a company out there that makes new hard tops for these things? The onlyrelly bad body damage is the right rear quarter panel. I think Iwill have to remove it and weld in a new one. I don't know much about blazers, just the trucks is this a hard fix? I hope to get some pics soon.

Chuck

beagler · 02-05-2005, 07:42 PM

I don't know much about the blazers but there aint nuttin on these years of trucks you can't do with a little time and a lot of headache on some things. ttt for ya hope you get the answer to your ?. Good luck with it. Lets see some pics of it too if ya can.

**JIMs70GMC** · 02-05-2005, 08:04 PM

Oh the horror, it's a "Jimmy" not a Blazer.

Anyway sounds like a good deal.

Here's some good reading/pics: http://67-72chevytrucks.com/vboard/s....php3?t=136685

72 CustomCamper · 02-05-2005, 11:14 PM

68w/sbc406 · 02-06-2005, 12:17 AM

hgs_notes · 02-06-2005, 12:24 AM

There is a 72 Jimmy blazer with a good single wall top sitting in the junkyard a couple miles south of me. I pulled the rear hatch off last year and sent it to another board member. The back seat is also in excellent shape.

I know its a long drive though.

Mike

krue · 02-06-2005, 12:43 AM

Sounds like you got a good deal!

Joe67 · 02-08-2005, 12:14 PM

Quote:

Originally Posted by firemanchuck

I am the new owner of a 1972 gmc blazer 4x4. I wanted a chevy but this was one hell of a deal. Te body is in decent shape minus the usual rust spots. Ipaid $600.00 bucks for this thing and it actually runs, 4-wheel drive even works. The hard top is in pretty bad shape though. Is they're a company out there that makes new hard tops for these things? The onlyrelly bad body damage is the right rear quarter panel. I think Iwill have to remove it and weld in a new one. I don't know much about blazers, just the trucks is this a hard fix? I hope to get some pics soon.

Chuck

Sounds like a good buy to me

Get some pics up

02-05-2005, 04:59 PM	#1
firemanchuck FightingFire Saving Lives Join Date: Mar 2003 Location: Tulsa, Oklahoma Posts: 65	To good to be true..... I am the new owner of a 1972 gmc blazer 4x4. I wanted a chevy but this was one hell of a deal. Te body is in decent shape minus the usual rust spots. Ipaid $600.00 bucks for this thing and it actually runs, 4-wheel drive even works. The hard top is in pretty bad shape though. Is they're a company out there that makes new hard tops for these things? The onlyrelly bad body damage is the right rear quarter panel. I think Iwill have to remove it and weld in a new one. I don't know much about blazers, just the trucks is this a hard fix? I hope to get some pics soon. Chuck

02-05-2005, 07:42 PM	#2
beagler Registered User Join Date: Oct 2004 Location: Cincy, OH Posts: 190	I don't know much about the blazers but there aint nuttin on these years of trucks you can't do with a little time and a lot of headache on some things. ttt for ya hope you get the answer to your ?. Good luck with it. Lets see some pics of it too if ya can. __________________ '71 GMC 350 bored, cam'd, straight pipes LOOKING FOR A 4x4 redz 1970 K5 "Time has stopped for our classic trucks, and as such maintain nostalgia and simplicity of the vehicles and of an era passed."

02-05-2005, 08:04 PM	#3
JIMs70GMC user # 2756 Join Date: Jun 2001 Location: Chesapeake, Virginia Posts: 4,612	Oh the horror, it's a "Jimmy" not a Blazer. Anyway sounds like a good deal. Here's some good reading/pics: http://67-72chevytrucks.com/vboard/s....php3?t=136685 __________________ 1970 K25, 8' stepside bed 350/465/205 44 up front, 60 in the rear 4.10s rolling on 33" Dunlop MTs 1986 K5, 350/465/208 Dana 60/14 bolt from a cucv 36" Super Swampers TSL/SX 1983 K20 w/ CUCV axles, 350/700R4/208 sitting on 37" Goodyears 1986 M1031 6.2 diesel, TH400/NP205 locker in the rear and a LS in the front, all stock for now..... 1986 K30, 350/400/205 dana 60 and 14 bolt. I kept the drivetrain. Body/bad and chassis are gone. 1981 K30, 350/465/205 dana 60 and dually 14 bolt. Has a G80, and a flat bed. Going to replace the flat bed. 1985 K20, 350/400/208 10 bolt and SF 14 bolt. I wonder where I can find some 1 tons. Hmmmmm Last edited by JIMs70GMC; 02-05-2005 at 08:08 PM.

02-05-2005, 11:14 PM	#4
72 CustomCamper huh ??? Join Date: Nov 2002 Location: Fredericksburg,Va. Posts: 3,368	Attached Images __________________ 90 Blazer Silverado 350w/ 700R4 and 32" Kelly's "I am a bomb technician. If you see me running try to keep up!"

02-06-2005, 12:17 AM	#5
68w/sbc406 Got Light Emitting Diode? Join Date: Apr 2004 Location: Newberg, OR Posts: 2,485	__________________ 1968 1/2 ton 2wd lwb 6 lug disc and bags up front. Next c notch and rear bags '02 Chevy Silverado LT ext cab short bed 2WD 5/7 drop on 22's(the family car) 1993 Cherokee work ride/weekend wheeler

02-06-2005, 12:24 AM	#6
hgs_notes GEARHEAD Join Date: Aug 2003 Location: MN Posts: 6,126	There is a 72 Jimmy blazer with a good single wall top sitting in the junkyard a couple miles south of me. I pulled the rear hatch off last year and sent it to another board member. The back seat is also in excellent shape. I know its a long drive though. Mike __________________ If no one knows what you're doing, they can't tell you you're doing it wrong HG's Dream Car Build - Shelby Cobra Kit Build your own adjustable track bar 71 Long Fleet C/10 72 Jimmy 4x4 (Junkyard Jimmy) HG's Plow Truck '78 K35 Dually Bigass Farm Truck HG's thread of miscellaneous stuff

02-06-2005, 12:43 AM	#7
krue Designated A-hole! Join Date: Mar 2003 Location: South Mississippi Posts: 36,448	Sounds like you got a good deal! __________________ "If it ain't broke, fix it 'til it is!" Being stupid ain't illegal. We're Still Debt Free Except for the House!!! www.daveramsey.com 70 GMC SWB Stepside project "Green Booger" soon to be 6.0l/4l80e 93 S-10 "Poppaw's Truck"



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.