WTB aluminum slots - The 1947 - Present Chevrolet & GMC Truck Message Board Network

HeavyD · 02-09-2005, 12:49 AM

I am still looking for a set of aluminum slot wheels, 15x8 preferred, 5 bolt with no unilug if possible. There must be a set left somewhere??

Edit: If anyone has a set but are unwilling to ship to Canada, I am heading down to Minnesota within a month and they could be shipped there.

Tx Firefighter · 02-09-2005, 07:39 AM

You can still buy them new if you can't turn up a set of used ones.

CLICKY

454_72_4X4 · 02-09-2005, 10:31 AM

Set or 2 or 4?
Big 5 bolt or small 5 pattern (5x5 or 5x4-3/4)?
I've got a pair of 7's but I think they are 4-3/4 pattern only and a couple pair of 10's but they are unilug.
The 7's are on a friends S-10 thats he's not driving and a set ofthe 10's I "sold" to another "friend" about a year ago but haven't seen any $ yet.
Also have a set of 14x6 small pattern.

HeavyD · 02-09-2005, 02:23 PM

Tx I looked at that site many times and never clicked onto the 2nd page of vintage wheels! Thanks alot. I will have to call them and see what prices are.
4x4, I should have mentioned I need 5 on 5 pattern, 4 of them preferred, but 2 would be better than none.
I am looking for a set that look like the ones these 2 trucks. Hope its Ok if I use these pictures.
Thanks.

HeavyD · 02-09-2005, 06:25 PM

Ttt

mooneyes · 02-09-2005, 06:50 PM

..i remember when slots where a dime a dozen and can't seem to find them anywhere now a days..i found my front ones at a parts swap but the back ones i got from a guy i work with but were 5 on 4 3/4 so i redrilled my axels and drums...good luck..here's another pic for ya

**MJN** · 02-09-2005, 06:54 PM

hmmmm, not to hijack the post or anything but how desireable are 6 lug 15x8 or 15x10 slots?

LUV2XCLR8 · 02-09-2005, 06:58 PM

Quote:

Originally Posted by MJN

hmmmm, not to hijack the post or anything but how desireable are 6 lug 15x8 or 15x10 slots?

I WOULD LIKE A SET OF 6 LUG 15 X 10'S

Quote:

Originally Posted by Tx Firefighter

You can still buy them new if you can't turn up a set of used ones.

CLICKY

WOW, NOT BAD, IMHO, $525.00 FOR A SET OF 6 LUG 17 X 8 RIMS

HeavyD · 02-09-2005, 08:17 PM

I am considering new ones, but they look shallower than the ones in the pics posted. I like 8 inches wide, but deep looking, like you guys have. There is a guy here that has lots, but he wants $900.00 CAD a set for them. I don't mind paying $$ for good parts, but that seems a little much. I will have to see what the new Ansen slots look like..those pics make them look rather shallow. Anyone who wants to jack the thread feel free..maybe if it stays at the top long enough a set will come up for me

454_72_4X4 · 02-09-2005, 08:30 PM

$900! CAD

What's that convert to US dollars?

HeavyD · 02-09-2005, 08:35 PM

$721 and change.

cleatussnow · 02-09-2005, 09:22 PM

I picked mine up from a buddy. 15 x 10 (6 lug) I really like the look on a 4X4.

I have seen them at Swap Meets here and there, there is a company called AKH do a google search for them. They are in WA and have just about everything. If not you can get on a waiting list for what you are looking for.

Cleatus.

Jesse72 · 02-09-2005, 10:14 PM

I picked up a set with my truck of 6 lug 15x7or8 for a hundred bucks but im not gettin rid of them they are sweet hope u find a nice set

HeavyD · 02-10-2005, 12:54 AM

JDL do you have set for sale?

454_72_4X4 · 02-10-2005, 02:46 AM

Hey Heavy, JDL posted in my "wheels wanted" thread.
Guessing you already seen it though. I'm not interested in slots myself but maybe he has what you're lookin for.
From the pic he posted they look like they might be 8's. Dunno though.

Here's my 10's on the back of the Regal, (might be spoken for though);

HeavyD · 02-10-2005, 04:02 AM

Ya, I sent JDL a pm, and hope he sees it if he wants to sell them. Anyone here know JDL?

454_72_4X4 · 02-10-2005, 04:26 AM

I don't know him but I live about 70 miles from him!

HeavyD · 02-10-2005, 01:41 PM

ttt.

mooneyes · 02-10-2005, 05:38 PM

..they do pop up on ebay once in awhile but sometimes under odd headings..so i always searched for mag wheels, slotted wheels, ansen , fenton...etc

HeavyD · 02-10-2005, 08:06 PM

I will try that as well. The best thing about this site is usually there are pics of the truck with the rims on it, so one can see what the package looks like. Some are shallow dished, while others are deep. Thanks for the tip.

see ten · 02-10-2005, 11:16 PM

I would like to see some pics of the 17" slots that American Racing is making now. I think they would look sweet on my C10 but I would want to see them in person first.

**Richard** · 02-11-2005, 02:12 AM

If you are interested I can see if I can find the receipt for the MT Challengers I purchased some time back. They are like the old slots but with a more modern look. A plus is that they were made by Alcoa and are forged (unlike all the new cast MT wheels) The company I purchased from had bought up all the old stock. I paid under $700 for all 4 15x10 wheels. Finding the center caps was tough though.

02-09-2005, 12:49 AM	#1
HeavyD Senior Member Join Date: Sep 2004 Location: Wakaw, Sask, Canada Posts: 3,180	WTB aluminum slots (will pick up in U.S.) I am still looking for a set of aluminum slot wheels, 15x8 preferred, 5 bolt with no unilug if possible. There must be a set left somewhere?? Edit: If anyone has a set but are unwilling to ship to Canada, I am heading down to Minnesota within a month and they could be shipped there. __________________ "You can take the man out of PA, but you can't take PA out of the man" Last edited by HeavyD; 02-09-2005 at 02:55 AM.

02-09-2005, 07:39 AM	#2
Tx Firefighter Watch out for your cornhole ! Join Date: Jun 2003 Location: Azle, Texas Posts: 14,162	You can still buy them new if you can't turn up a set of used ones. CLICKY __________________ I'm on the Instagram- @Gearhead_Kevin

02-09-2005, 10:31 AM	#3
454_72_4X4 Registered User Join Date: Apr 2004 Location: N.E. MO Posts: 1,749	Set or 2 or 4? Big 5 bolt or small 5 pattern (5x5 or 5x4-3/4)? I've got a pair of 7's but I think they are 4-3/4 pattern only and a couple pair of 10's but they are unilug. The 7's are on a friends S-10 thats he's not driving and a set ofthe 10's I "sold" to another "friend" about a year ago but haven't seen any $ yet. Also have a set of 14x6 small pattern. __________________ 72 C20 4X4 454 4 speed 89 Trans Am (was) 305 TPI 700r4 93 C1500 2wd Extended cab 350 700r4 98 Sonoma (TPI outa the Trans Am) 03 Yamaha 660 Raptor 03/04 660 Raptor 07 700 Raptor 85 Honda Odyssey

02-09-2005, 02:23 PM	#4
HeavyD Senior Member Join Date: Sep 2004 Location: Wakaw, Sask, Canada Posts: 3,180	Tx I looked at that site many times and never clicked onto the 2nd page of vintage wheels! Thanks alot. I will have to call them and see what prices are. 4x4, I should have mentioned I need 5 on 5 pattern, 4 of them preferred, but 2 would be better than none. I am looking for a set that look like the ones these 2 trucks. Hope its Ok if I use these pictures. Thanks. __________________ "You can take the man out of PA, but you can't take PA out of the man" Last edited by HeavyD; 02-10-2005 at 01:26 AM.

02-09-2005, 06:25 PM	#5
HeavyD Senior Member Join Date: Sep 2004 Location: Wakaw, Sask, Canada Posts: 3,180	Ttt __________________ "You can take the man out of PA, but you can't take PA out of the man"

02-09-2005, 06:50 PM	#6
mooneyes Registered User Join Date: Jan 2002 Location: Slippery Rock PA USA Posts: 1,692	..i remember when slots where a dime a dozen and can't seem to find them anywhere now a days..i found my front ones at a parts swap but the back ones i got from a guy i work with but were 5 on 4 3/4 so i redrilled my axels and drums...good luck..here's another pic for ya Attached Images __________________ Ken Lyons, Slippery rock pa 68 short step 327 t10 4 gear 72 2wd blazer project 70 lwb 305/700r driver 78 caprice project 02 cavalier D.D ( hate it!!)

02-09-2005, 06:54 PM	#7
MJN Registered User Join Date: Feb 2000 Location: Maquoketa, Ia/ Orr, Mn Posts: 3,045	hmmmm, not to hijack the post or anything but how desireable are 6 lug 15x8 or 15x10 slots?

02-09-2005, 08:17 PM	#9
HeavyD Senior Member Join Date: Sep 2004 Location: Wakaw, Sask, Canada Posts: 3,180	I am considering new ones, but they look shallower than the ones in the pics posted. I like 8 inches wide, but deep looking, like you guys have. There is a guy here that has lots, but he wants $900.00 CAD a set for them. I don't mind paying $$ for good parts, but that seems a little much. I will have to see what the new Ansen slots look like..those pics make them look rather shallow. Anyone who wants to jack the thread feel free..maybe if it stays at the top long enough a set will come up for me __________________ "You can take the man out of PA, but you can't take PA out of the man"

02-09-2005, 08:30 PM	#10
454_72_4X4 Registered User Join Date: Apr 2004 Location: N.E. MO Posts: 1,749	$900! CAD What's that convert to US dollars? __________________ 72 C20 4X4 454 4 speed 89 Trans Am (was) 305 TPI 700r4 93 C1500 2wd Extended cab 350 700r4 98 Sonoma (TPI outa the Trans Am) 03 Yamaha 660 Raptor 03/04 660 Raptor 07 700 Raptor 85 Honda Odyssey

02-09-2005, 08:35 PM	#11
HeavyD Senior Member Join Date: Sep 2004 Location: Wakaw, Sask, Canada Posts: 3,180	$721 and change. __________________ "You can take the man out of PA, but you can't take PA out of the man"

02-09-2005, 09:22 PM	#12
cleatussnow Registered User Join Date: Jun 2002 Location: Pleasanton, CA Posts: 162	I picked mine up from a buddy. 15 x 10 (6 lug) I really like the look on a 4X4. I have seen them at Swap Meets here and there, there is a company called AKH do a google search for them. They are in WA and have just about everything. If not you can get on a waiting list for what you are looking for. Cleatus. Attached Images __________________ "What we are dealin' with here is a complete lack of respect for the law...." Beuford T. Justice

02-09-2005, 10:14 PM	#13
Jesse72 Registered User Join Date: Jan 2005 Location: Ohio Posts: 171	I picked up a set with my truck of 6 lug 15x7or8 for a hundred bucks but im not gettin rid of them they are sweet hope u find a nice set __________________ Jesse 72 4x4 Sold 59 GMC air ride ls swap

02-10-2005, 12:54 AM	#14
HeavyD Senior Member Join Date: Sep 2004 Location: Wakaw, Sask, Canada Posts: 3,180	JDL do you have set for sale? __________________ "You can take the man out of PA, but you can't take PA out of the man"

02-10-2005, 02:46 AM	#15
454_72_4X4 Registered User Join Date: Apr 2004 Location: N.E. MO Posts: 1,749	Hey Heavy, JDL posted in my "wheels wanted" thread. Guessing you already seen it though. I'm not interested in slots myself but maybe he has what you're lookin for. From the pic he posted they look like they might be 8's. Dunno though. Here's my 10's on the back of the Regal, (might be spoken for though); __________________ 72 C20 4X4 454 4 speed 89 Trans Am (was) 305 TPI 700r4 93 C1500 2wd Extended cab 350 700r4 98 Sonoma (TPI outa the Trans Am) 03 Yamaha 660 Raptor 03/04 660 Raptor 07 700 Raptor 85 Honda Odyssey

02-10-2005, 04:02 AM	#16
HeavyD Senior Member Join Date: Sep 2004 Location: Wakaw, Sask, Canada Posts: 3,180	Ya, I sent JDL a pm, and hope he sees it if he wants to sell them. Anyone here know JDL? __________________ "You can take the man out of PA, but you can't take PA out of the man"



Register or Log In To remove these advertisements.

02-10-2005, 04:26 AM	#17
454_72_4X4 Registered User Join Date: Apr 2004 Location: N.E. MO Posts: 1,749	I don't know him but I live about 70 miles from him! __________________ 72 C20 4X4 454 4 speed 89 Trans Am (was) 305 TPI 700r4 93 C1500 2wd Extended cab 350 700r4 98 Sonoma (TPI outa the Trans Am) 03 Yamaha 660 Raptor 03/04 660 Raptor 07 700 Raptor 85 Honda Odyssey

02-10-2005, 01:41 PM	#18
HeavyD Senior Member Join Date: Sep 2004 Location: Wakaw, Sask, Canada Posts: 3,180	ttt. __________________ "You can take the man out of PA, but you can't take PA out of the man"

02-10-2005, 05:38 PM	#19
mooneyes Registered User Join Date: Jan 2002 Location: Slippery Rock PA USA Posts: 1,692	..they do pop up on ebay once in awhile but sometimes under odd headings..so i always searched for mag wheels, slotted wheels, ansen , fenton...etc __________________ Ken Lyons, Slippery rock pa 68 short step 327 t10 4 gear 72 2wd blazer project 70 lwb 305/700r driver 78 caprice project 02 cavalier D.D ( hate it!!)

02-10-2005, 08:06 PM	#20
HeavyD Senior Member Join Date: Sep 2004 Location: Wakaw, Sask, Canada Posts: 3,180	I will try that as well. The best thing about this site is usually there are pics of the truck with the rims on it, so one can see what the package looks like. Some are shallow dished, while others are deep. Thanks for the tip. __________________ "You can take the man out of PA, but you can't take PA out of the man"

02-10-2005, 11:16 PM	#21
see ten WTB this ad Join Date: Sep 2004 Location: Lafayette Georgia Posts: 5,074	17" slots I would like to see some pics of the 17" slots that American Racing is making now. I think they would look sweet on my C10 but I would want to see them in person first.

02-11-2005, 02:12 AM	#22
Richard Senior Member Join Date: Dec 1999 Location: Southern California Posts: 2,855	If you are interested I can see if I can find the receipt for the MT Challengers I purchased some time back. They are like the old slots but with a more modern look. A plus is that they were made by Alcoa and are forged (unlike all the new cast MT wheels) The company I purchased from had bought up all the old stock. I paid under $700 for all 4 15x10 wheels. Finding the center caps was tough though. __________________ Richard 1972 K10 Custom Deluxe SWB Fleetside My build https://67-72chevytrucks.com/vboard/...d.php?t=800746

Register or Log In To remove these advertisements.