Parts & cab F/S From 67 Stepside - The 1947 - Present Chevrolet & GMC Truck Message Board Network

67mbsc · 02-19-2005, 12:16 PM

I have the following parts to sell that are my extra parts. All located near Myrtle Beach, S.C., and I can take them to the meet on March 17. I will post pictures as I can get them taken. All prices are PLUS shipping if available.

Stepside Fenders with NO cut-out, and with the steps. Very nice, no rot. $475.00 for all four pieces.

67 small window cab, needs some floor repair, and kick panel. Rockers are actually pretty good. Should have one corner put in. With title and/or bill of sale $200.00 No shipping on this cab. No glass, no doors.

LWB Stepside Bed Panels, one needs some rust repair, not all that bad. $250.00? for the pair.

67 GMC frame, shortened. With title and/or bill of sale. $100.00

All front suspension parts from this frame, $75.00.

Stepside Tail Gate, needs some work, $50.00.

Seat, needs recovered, with tracks, $25.00.

Step Side Rear bumper, has some extra holes from a plate bolted for a trailer hitch. $30.00

I can't think of a better reason to get the little lady to agree to go get more parts than to take her to Myrtle Beach!!!!

69ShortStep · 02-19-2005, 02:01 PM

I am interested in the tailgate and rear bumper, Is the tailgate original ( GMC or CHEV)? Is the rear bumper chromed or painted? do you have any pictures?

68 chevy truck-TPI · 02-19-2005, 03:33 PM

interested in the drivers side stepbed fender without the step. can you post pic's or email them to: dharrison01@alltel.net

67mbsc · 02-20-2005, 01:41 AM

69Shortstep; the tailgate is original GMC, the rear bumper is painted steel original. I hope to get some pictures soon, I've been really sick which is why I'm selling a lot of parts. Thanks. And, as for the rear Step Fenders, same way, I hope to get some pics Sunday for yall.

67mbsc · 02-20-2005, 10:08 AM

Hey!!!!!!! I can't figure out how to attach the pics!!!! Can someone help me??? In the meantime, if you want pics, please let me know.
EastCoastMPG@yahoo.com

LUV2XCLR8 · 02-20-2005, 10:28 AM

I CAN POST FOR YA luv2xclr8@charter.net, OR LOOK ON THE "FAQ'S" SECTION FOR HELP ON POSTING PIC'S

Joe67 · 02-21-2005, 01:06 PM

Are the rear stepside bed outer panels the same for a SWB? If so, how much to ship to 48035?

67mbsc · 02-21-2005, 09:07 PM

At this time, I'm holding the rear Step Fenders for a member till next week. If you're interested, please let me know.
THanks

67mbsc · 02-21-2005, 09:09 PM

67c10, it is my understanding and thinking that my long wheel base bedsies will not work for a SWB.

kaycee · 02-21-2005, 11:05 PM

Do you have the rear tail light/backup light harness ?

67mbsc · 02-21-2005, 11:28 PM

kaycee, I just saw that harness today, from the body connector to the end of it,(probably about 6-8 feet, I'd guess?) lets say $15.00 plus the shipping? Let me know.
Thanks

Joe67 · 02-22-2005, 08:54 AM

Quote:

Originally Posted by 67mbsc

67c10, it is my understanding and thinking that my long wheel base bedsies will not work for a SWB.

No problem, thanks

kaycee · 02-22-2005, 11:44 PM

Sounds good do u have any pics? PM me

qksilver · 02-27-2005, 10:55 AM

i am interested in the frame, but no offense, only if it was done clean. I am here by Fort Bragg, might be able to pick it up the week end of the 13th. If I can get my wife to agree, we will be down for her birthday. Don't know if she will agree to dragging a trailer with us.
Thanks,
Steve

67mbsc · 02-27-2005, 11:15 AM

Hey Steve,
Yes, the frame was done right. There needs to be the fishplate finished, that's all. The frame is really, really clean, too. That weekend, I think, is when we have a really big meet here, I'm going to be there a lot, and trying to sell some parts, too. So, if you are interested, please PM me so we can work out the details.

67mbsc · 03-02-2005, 07:27 AM

Still have parts to sell

john@thepier · 03-02-2005, 02:17 PM

Is the GMC gill and top bar available.

67mbsc · 03-02-2005, 02:20 PM

Yep, the Grille is available. you can write me direct at

EastCoastMPG@yahoo.com

Thanks

john@thepier · 03-02-2005, 02:28 PM

I have sent you a message to your e-mail

**special-K** · 03-04-2005, 08:07 AM

Could you send me pics of the bedsides,fenders,&steps?Also the cab.

67mbsc · 03-04-2005, 02:41 PM

Hey!
I'll be glad to send some pics, but I'm leaving for a few days, I will send them when I get back. Write me at
EastCoastMPG@yahoo.com
Thanks

dapolice1 · 03-04-2005, 05:48 PM

WIll you sale just the steps without the fenders?
That might help you move the fenders a little easier.
Lemme know.

dapolice1 · 03-09-2005, 01:27 PM

Quote:

Originally Posted by dapolice1

WIll you sale just the steps without the fenders?
That might help you move the fenders a little easier.
Lemme know.

?????

**smitty62** · 03-04-2005, 08:56 PM

Yeah---I'd be interested in the fenders without the steps!

**special-K** · 03-05-2005, 07:24 AM

Can I get an update on what you still have for sale?

02-19-2005, 12:16 PM	#1
67mbsc Senior Member Join Date: Jan 2005 Location: Myrtle Beach, South Carolina Posts: 266	Parts & cab F/S From 67 Stepside I have the following parts to sell that are my extra parts. All located near Myrtle Beach, S.C., and I can take them to the meet on March 17. I will post pictures as I can get them taken. All prices are PLUS shipping if available. Stepside Fenders with NO cut-out, and with the steps. Very nice, no rot. $475.00 for all four pieces. 67 small window cab, needs some floor repair, and kick panel. Rockers are actually pretty good. Should have one corner put in. With title and/or bill of sale $200.00 No shipping on this cab. No glass, no doors. LWB Stepside Bed Panels, one needs some rust repair, not all that bad. $250.00? for the pair. 67 GMC frame, shortened. With title and/or bill of sale. $100.00 All front suspension parts from this frame, $75.00. Stepside Tail Gate, needs some work, $50.00. Seat, needs recovered, with tracks, $25.00. Step Side Rear bumper, has some extra holes from a plate bolted for a trailer hitch. $30.00 I can't think of a better reason to get the little lady to agree to go get more parts than to take her to Myrtle Beach!!!!

02-20-2005, 01:41 AM	#4
67mbsc Senior Member Join Date: Jan 2005 Location: Myrtle Beach, South Carolina Posts: 266	Pics & Parts 69Shortstep; the tailgate is original GMC, the rear bumper is painted steel original. I hope to get some pictures soon, I've been really sick which is why I'm selling a lot of parts. Thanks. And, as for the rear Step Fenders, same way, I hope to get some pics Sunday for yall.

02-20-2005, 10:08 AM	#5
67mbsc Senior Member Join Date: Jan 2005 Location: Myrtle Beach, South Carolina Posts: 266	Pics!!! Hey!!!!!!! I can't figure out how to attach the pics!!!! Can someone help me??? In the meantime, if you want pics, please let me know. EastCoastMPG@yahoo.com

02-20-2005, 10:28 AM	#6
LUV2XCLR8 The LuvShack Garage Join Date: Jan 2004 Location: Maple Grove, TN (West Side) Posts: 30,468	I CAN POST FOR YA luv2xclr8@charter.net, OR LOOK ON THE "FAQ'S" SECTION FOR HELP ON POSTING PIC'S __________________ Owner/Op: "TN Classic Transport Carriers" The Toy: "Square Vette" 72 Hybrid Blazer Toy Barn: "LuvShack" 40 x 60 x 20 Shop Tow Piggy:"Maddy" 88 Silverado 3500 Hauler: "Feathers" 14 Aluma 8218T

02-21-2005, 01:06 PM	#7
Joe67 67 is sold Join Date: Apr 2001 Location: Troy, Michigan Posts: 6,733	Are the rear stepside bed outer panels the same for a SWB? If so, how much to ship to 48035? __________________ Joe - Formerly 67c10step ------------------------------- 1967 Chevy Stepside - ECE 4/6, fuelcell, 5lug - SOLD gr8lakes - My ebay auctions Click here to order forum apparel :: Click here to become a subscribing member

02-19-2005, 02:01 PM	#2
69ShortStep Registered User Join Date: Jan 2004 Location: Canal Winchester, OH Posts: 143	I am interested in the tailgate and rear bumper, Is the tailgate original ( GMC or CHEV)? Is the rear bumper chromed or painted? do you have any pictures?

02-19-2005, 03:33 PM	#3
68 chevy truck-TPI A WORK IN PROGRESS Join Date: Apr 2004 Location: toccoa, georgia Posts: 205	interested in the drivers side stepbed fender without the step. can you post pic's or email them to: dharrison01@alltel.net

02-21-2005, 09:07 PM	#8
67mbsc Senior Member Join Date: Jan 2005 Location: Myrtle Beach, South Carolina Posts: 266	Fenders At this time, I'm holding the rear Step Fenders for a member till next week. If you're interested, please let me know. THanks

02-21-2005, 09:09 PM	#9
67mbsc Senior Member Join Date: Jan 2005 Location: Myrtle Beach, South Carolina Posts: 266	stepside panels 67c10, it is my understanding and thinking that my long wheel base bedsies will not work for a SWB.

02-21-2005, 11:05 PM	#10
kaycee Registered User Join Date: Jan 2000 Location: Wyoming USA Posts: 2,453	Do you have the rear tail light/backup light harness ? __________________ 2001 Silverado K-1500 2005 FXDWG stage3 69 CHEVY Short/Step 327/4L60 373 posi 63 IMPALA 327/4L60

02-21-2005, 11:28 PM	#11
67mbsc Senior Member Join Date: Jan 2005 Location: Myrtle Beach, South Carolina Posts: 266	kaycee, I just saw that harness today, from the body connector to the end of it,(probably about 6-8 feet, I'd guess?) lets say $15.00 plus the shipping? Let me know. Thanks

02-22-2005, 11:44 PM	#13
kaycee Registered User Join Date: Jan 2000 Location: Wyoming USA Posts: 2,453	Sounds good do u have any pics? PM me __________________ 2001 Silverado K-1500 2005 FXDWG stage3 69 CHEVY Short/Step 327/4L60 373 posi 63 IMPALA 327/4L60

02-27-2005, 10:55 AM	#14
qksilver Senior Member Join Date: Dec 2004 Location: Southern Pines NC Posts: 3,853	i am interested in the frame, but no offense, only if it was done clean. I am here by Fort Bragg, might be able to pick it up the week end of the 13th. If I can get my wife to agree, we will be down for her birthday. Don't know if she will agree to dragging a trailer with us. Thanks, Steve

02-27-2005, 11:15 AM	#15
67mbsc Senior Member Join Date: Jan 2005 Location: Myrtle Beach, South Carolina Posts: 266	Frame Hey Steve, Yes, the frame was done right. There needs to be the fishplate finished, that's all. The frame is really, really clean, too. That weekend, I think, is when we have a really big meet here, I'm going to be there a lot, and trying to sell some parts, too. So, if you are interested, please PM me so we can work out the details.

03-02-2005, 07:27 AM	#16
67mbsc Senior Member Join Date: Jan 2005 Location: Myrtle Beach, South Carolina Posts: 266	NEBODY else need pics??? Still have parts to sell



Register or Log In To remove these advertisements.

03-02-2005, 02:17 PM	#17
john@thepier Senior Member Join Date: Aug 2004 Location: Lake Geneva, WI 53147 Posts: 970	Is the GMC gill and top bar available.

03-02-2005, 02:20 PM	#18
67mbsc Senior Member Join Date: Jan 2005 Location: Myrtle Beach, South Carolina Posts: 266	GMC Grille Yep, the Grille is available. you can write me direct at EastCoastMPG@yahoo.com Thanks

03-02-2005, 02:28 PM	#19
john@thepier Senior Member Join Date: Aug 2004 Location: Lake Geneva, WI 53147 Posts: 970	I have sent you a message to your e-mail

03-04-2005, 08:07 AM	#20
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,851	Could you send me pics of the bedsides,fenders,&steps?Also the cab. __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

03-04-2005, 02:41 PM	#21
67mbsc Senior Member Join Date: Jan 2005 Location: Myrtle Beach, South Carolina Posts: 266	Pictures Hey! I'll be glad to send some pics, but I'm leaving for a few days, I will send them when I get back. Write me at EastCoastMPG@yahoo.com Thanks

03-04-2005, 05:48 PM	#22
dapolice1 We can roll all Day!! Join Date: Jul 2003 Location: Austin, Tx. Posts: 165	WIll you sale just the steps without the fenders? That might help you move the fenders a little easier. Lemme know.

03-04-2005, 08:56 PM	#24
smitty62 Registered User Join Date: May 2002 Location: North Carolina Posts: 1,234	Yeah---I'd be interested in the fenders without the steps! __________________ Stepsides look like real trucks! Smitty

03-05-2005, 07:24 AM	#25
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,851	Can I get an update on what you still have for sale? __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

Register or Log In To remove these advertisements.