Factory stainless steel headers - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Frank_Zeller · 02-19-2005, 06:06 PM

These are factory 1986 stainless steel headers/manifolds used on ¾ ton 350 4-speed trucks. These trucks did not have the catalytic converters and had factory duals. They accept a 2.5-inch head pipe and have the thick flange with tube stand off that will allow the use of the factory brackets used with the cast iron manifolds. I spent a lot of time fixing these up to use on my 69 but they hit the dam frame mount that the motor mount attaches to. These are similar to the GM headers used on the 85 and up Corvettes. Perfect for lowered trucks. See pics for details $75.00

[IMG]

f.monroe · 02-19-2005, 08:42 PM

I am interested .Where are you at in Austin ?How much is shipping to Bryan, Tx. 77808 .A business address .You can contact me tomorrow at 979-272-9403. thanks Frank

Cethern · 02-19-2005, 09:52 PM

That is pretty cool I had heard of using those but could not remember the yr truck to get them.

I wonder if those would fit my 72 or 71 both 4x4's

Frank_Zeller · 02-19-2005, 11:03 PM

I'm in North West Austin off 183 and Spicewood Springs Road

Dont think they will fit 71-72 4x4. I have my V8 in 6 cly position which I think is the same as the 4x4 V8 position.

Eyegore · 02-20-2005, 12:25 PM

Frank did you have factory AC on the 86, I know that headers on a 350 require modifications to the AC braket, do these require the same modification? And were their air ports on the manifolds, I know you said it was a non cat version, but I'm looking at the shiney spots at where the header connects to the head and it appears to be welded over air ports.
I ask since my 86 does have cats and i'm installing a 350 and I would love headers, but I need the air ports.

Thanks

Tom

ghitch75 · 02-22-2005, 04:16 PM

Quote:

Originally Posted by Frank_Zeller

I'm in North West Austin off 183 and Spicewood Springs Road

Dont think they will fit 71-72 4x4. I have my V8 in 6 cly position which I think is the same as the 4x4 V8 position.

so are you saying they would fit a 79 3/4 ton 4x4?

Frank_Zeller · 02-20-2005, 01:02 PM

Tom,

I cut a round piece of steel for each port and welded them closed. Then ground it flat. If you had to you could drill and tap again. They should work with the stock 86 AC brakets.

Frank

**fine69** · 02-20-2005, 01:15 PM

Boys i have these headers on my 85 Chevy towtruck. Very nice. A steal at this price.

cochran63 · 02-20-2005, 09:48 PM

I have a set but they came off of an 86 scotsdale with a th400. I have been told that these were a one year deal and only came on the scotsdales/

muddyole 69 · 02-20-2005, 10:51 PM

next in line plz btw mailbox is full

f.monroe · 02-21-2005, 12:53 AM

I am going to pass for now .Thanks Frank

Frank_Zeller · 02-21-2005, 06:52 AM

Mail box cleaned out

Frank_Zeller · 02-22-2005, 06:02 PM

I dont know. I've only seen them on 3/4 ton 2 wheel drives. I'm not well versed in the 73-86 Trucks.

plumbcut · 02-22-2005, 06:40 PM

those are pretty cool, I have never seen them before...

BigBlockBurris · 02-22-2005, 06:55 PM

Are these still available? If so will you figure shipping to NC 28083?
Please email me at Mburris@carolina.rr.com

Thanks

BBB

Frank_Zeller · 02-22-2005, 07:15 PM

Still have them.....

Frank_Zeller · 02-24-2005, 08:39 AM

I have had a lot of inquires on shipping. So to make it easy. $100 delivered to the 48 states.

ghitch75 · 03-01-2005, 09:21 AM

do you still have these headers?

Frank_Zeller · 03-01-2005, 09:33 AM

Quote:

Originally Posted by ghitch75

do you still have these headers?

Yes I still got them. Lowered the price to 75.00

Frank_Zeller · 03-01-2005, 10:59 AM

sale pending

ghitch75 · 03-07-2005, 09:38 AM

frank yhpm

02-19-2005, 06:06 PM	#1
Frank_Zeller Registered User Join Date: Jun 2001 Location: Austin, Texas Posts: 796	Factory stainless steel headers PRICE REDUCED These are factory 1986 stainless steel headers/manifolds used on ¾ ton 350 4-speed trucks. These trucks did not have the catalytic converters and had factory duals. They accept a 2.5-inch head pipe and have the thick flange with tube stand off that will allow the use of the factory brackets used with the cast iron manifolds. I spent a lot of time fixing these up to use on my 69 but they hit the dam frame mount that the motor mount attaches to. These are similar to the GM headers used on the 85 and up Corvettes. Perfect for lowered trucks. See pics for details $75.00 [IMG] __________________ 69 SWB C/10 5-6 drop 700R4 69 Firebird Convert 455 4 spd 70 Torino GT Convert Austin-Texas Last edited by Frank_Zeller; 02-27-2005 at 12:22 PM.

02-19-2005, 08:42 PM	#2
f.monroe Senior Member Join Date: May 2004 Location: Caldwell,Tx. Posts: 3,648	Manifolds I am interested .Where are you at in Austin ?How much is shipping to Bryan, Tx. 77808 .A business address .You can contact me tomorrow at 979-272-9403. thanks Frank

02-19-2005, 09:52 PM	#3
Cethern What was I thinking?? Join Date: Dec 2003 Location: Commerce City Co Posts: 636	That is pretty cool I had heard of using those but could not remember the yr truck to get them. I wonder if those would fit my 72 or 71 both 4x4's __________________ 72 K5 that needs lots of parts.. 71 GMC 3/4 4x4 That doesn't need much which is a good thing I don't think I could aford another money pit...

02-19-2005, 11:03 PM	#4
Frank_Zeller Registered User Join Date: Jun 2001 Location: Austin, Texas Posts: 796	I'm in North West Austin off 183 and Spicewood Springs Road Dont think they will fit 71-72 4x4. I have my V8 in 6 cly position which I think is the same as the 4x4 V8 position. __________________ 69 SWB C/10 5-6 drop 700R4 69 Firebird Convert 455 4 spd 70 Torino GT Convert Austin-Texas Last edited by Frank_Zeller; 02-19-2005 at 11:06 PM.

02-20-2005, 12:25 PM	#5
Eyegore What Hump? Join Date: Apr 2003 Location: New River AZ Posts: 2,009	Frank did you have factory AC on the 86, I know that headers on a 350 require modifications to the AC braket, do these require the same modification? And were their air ports on the manifolds, I know you said it was a non cat version, but I'm looking at the shiney spots at where the header connects to the head and it appears to be welded over air ports. I ask since my 86 does have cats and i'm installing a 350 and I would love headers, but I need the air ports. Thanks Tom __________________ Lil red 86 c-10 99 Sub 78 Camper Special w/ 454

02-20-2005, 01:02 PM	#7
Frank_Zeller Registered User Join Date: Jun 2001 Location: Austin, Texas Posts: 796	Tom, I cut a round piece of steel for each port and welded them closed. Then ground it flat. If you had to you could drill and tap again. They should work with the stock 86 AC brakets. Frank __________________ 69 SWB C/10 5-6 drop 700R4 69 Firebird Convert 455 4 spd 70 Torino GT Convert Austin-Texas

02-20-2005, 01:15 PM	#8
fine69 Senior Member Join Date: Dec 1999 Location: Urbana,Ohio,USA Posts: 4,618	Boys i have these headers on my 85 Chevy towtruck. Very nice. A steal at this price. __________________ 2008 Chevy HHR 1/2 panel. 1949 Chevy Panel truck(just sittin, waiting) Board member #6

02-20-2005, 09:48 PM	#9
cochran63 Registered User Join Date: Jan 2004 Location: Oklahoma Posts: 1,057	I have a set but they came off of an 86 scotsdale with a th400. I have been told that these were a one year deal and only came on the scotsdales/ __________________ Youth soon passes away, but immaturity can last a life time.

02-20-2005, 10:51 PM	#10
muddyole 69 Senior Member Join Date: Jan 2004 Location: SE Ohio Posts: 1,121	headers next in line plz btw mailbox is full __________________ hav'n fun be'n me

02-21-2005, 12:53 AM	#11
f.monroe Senior Member Join Date: May 2004 Location: Caldwell,Tx. Posts: 3,648	I am going to pass for now .Thanks Frank

02-21-2005, 06:52 AM	#12
Frank_Zeller Registered User Join Date: Jun 2001 Location: Austin, Texas Posts: 796	Mail box cleaned out __________________ 69 SWB C/10 5-6 drop 700R4 69 Firebird Convert 455 4 spd 70 Torino GT Convert Austin-Texas

02-22-2005, 06:02 PM	#13
Frank_Zeller Registered User Join Date: Jun 2001 Location: Austin, Texas Posts: 796	I dont know. I've only seen them on 3/4 ton 2 wheel drives. I'm not well versed in the 73-86 Trucks. __________________ 69 SWB C/10 5-6 drop 700R4 69 Firebird Convert 455 4 spd 70 Torino GT Convert Austin-Texas

02-22-2005, 06:40 PM	#14
plumbcut california fill Join Date: Apr 2004 Location: Sunny So-Cal Posts: 694	those are pretty cool, I have never seen them before...

02-22-2005, 06:55 PM	#15
BigBlockBurris Registered User Join Date: Nov 2001 Location: Concord,NC,USA Posts: 743	Manifolds Are these still available? If so will you figure shipping to NC 28083? Please email me at Mburris@carolina.rr.com Thanks BBB

02-22-2005, 07:15 PM	#16
Frank_Zeller Registered User Join Date: Jun 2001 Location: Austin, Texas Posts: 796	Still have them..... __________________ 69 SWB C/10 5-6 drop 700R4 69 Firebird Convert 455 4 spd 70 Torino GT Convert Austin-Texas



Register or Log In To remove these advertisements.

02-24-2005, 08:39 AM	#17
Frank_Zeller Registered User Join Date: Jun 2001 Location: Austin, Texas Posts: 796	I have had a lot of inquires on shipping. So to make it easy. $100 delivered to the 48 states. __________________ 69 SWB C/10 5-6 drop 700R4 69 Firebird Convert 455 4 spd 70 Torino GT Convert Austin-Texas

03-01-2005, 09:21 AM	#18
ghitch75 Registered User Join Date: Mar 2004 Location: B.F.E. Indiana Posts: 92	do you still have these headers?

03-01-2005, 10:59 AM	#20
Frank_Zeller Registered User Join Date: Jun 2001 Location: Austin, Texas Posts: 796	sale pending __________________ 69 SWB C/10 5-6 drop 700R4 69 Firebird Convert 455 4 spd 70 Torino GT Convert Austin-Texas

03-07-2005, 09:38 AM	#21
ghitch75 Registered User Join Date: Mar 2004 Location: B.F.E. Indiana Posts: 92	frank yhpm

Register or Log In To remove these advertisements.