Time to sell my project parts - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Chevy Wrench · 02-26-2005, 06:04 PM

Hey everyone. I need to get rid of my 1967 project parts...so here is the list. Please note that the body parts must be local pick up only. Prices are firm. Please use my email address to contact me, jbfiske@hotmail.com

1 set of McGaughys 2 1/2 " drop spindles with rotors, bearings, seals, calipers
Everything is brand new/ never mounted. $300.00 Smokin' deal SOLD

1 set of one peice windows, brand new. $250.00 ( Im not sure of the brand, I will have to check) Complete kit incl. glass, hardware and instructions. SOLD

I have a set of doors with a little rust (repairable) and 6x9 holes at the bottom. $25.00 each

Used windsheild cowl. $15.00

Used hood off 67 p/u. $25.00

Transmission TH 350 recently rebuilt $400.00 no shipping

Used tailgate swb $25.00

Just updated. I was going through my stuff and found a brand new billet HEI distributor minus cap, rotor and coil. Selling cheap...$85.00 Shipping incl. within the 48 SMOKIN' DEAL!!!!!!!!!!!!!!!!!!!!!!!!!!

Thanks for looking, if there is anything you need that I might have, please email me at jbfiske@hotmail.com Please do not pm me. I cant check it as offen as my email. You can also call me @ (801) 483-3192 9am-10pm Thanks again.
John

aitch · 02-26-2005, 06:20 PM

I want to go to one piece windows. I am interested.
Have you found the mfgr?

aitch

**hilljob26** · 02-26-2005, 07:39 PM

i am interseted in the one piece windows as well,is there anyone that will ship those for me,unless chevy wrench is willin to help a guy out,heck,if you were closer i trade ya a nos grill for em

Chevy Wrench · 02-26-2005, 07:46 PM

I think the kit is from Brothers, although Im not 100% sure. The reason Im selling the parts is because Im no longer going to build the truck and need money. I recently lost my job and need to pay bills and feed kids. By the way, if anyone in the Salt Lake area knows of any automotive repair shops looking for a good tech, let me know. I have over 15 years experiance. Plus I would work with you on the price of any parts you want if you hooked me up with a good job.

Joe67 · 02-26-2005, 08:00 PM

Quote:

Front grill and core support (67 Chevy) $35.00

That is a smokin' deal

HeavyD · 02-26-2005, 08:36 PM

Hey does the grille, core support, and hood have any rust? I have a relative in Salt Lake..this might work for me.

Chevy Wrench · 02-26-2005, 08:39 PM

I forgot to list the transmission I have. Its a TH350 rebuilt. I dont know all of the specs on it, but from what I have heard about it, it has been built for power. Never been installed after the rebuild. I will let it go for $400.00

Chevy Wrench · 02-26-2005, 08:44 PM

The grill, support and hood are in good condition. Just surface rust if any. The hood has holes drilled into it on the front edge. I dont know if they were for a bug deflector or for factory trim. But there is about 10 or 15 of them. Could be filled in very easily. I would post pics, but my camera was stolen about a month ago. Thanks.

HeavyD · 02-26-2005, 08:58 PM

I will take the core support and grille. Give me a day or so to get my nephew to pick them up. Thanks.

Chevy Wrench · 02-27-2005, 01:33 AM

Heavy D, sent you an email. Thanks

extd56 · 02-27-2005, 01:58 AM

What part numbers are the dropped spindles? Interested

**hilljob26** · 02-27-2005, 06:56 PM

im tellin ya man,if you will ship this stuff,you will have the money you need right now,we are all willing to help you out as long as you can help us,think about it,theres alot of 67-72 junkies out here,

camaro__thunder · 02-27-2005, 11:09 PM

woo hoo 4th in line for the windows ! if shipping is possible

Chevy Wrench · 02-28-2005, 10:40 AM

Sorry guys, shipping is not an option at this time. BTW frame is now in 5 peices, sad to see it go like that.

Chevy Wrench · 03-02-2005, 05:33 PM

ttt

joelboxt · 03-02-2005, 05:44 PM

im interested in that distributor.. but you for sure will not ship that eh?

what brand is it?

Chevy Wrench · 03-02-2005, 11:14 PM

I guess I could ship the dist. Give me your zip to see how much the ride would be.

Chevy Wrench · 03-02-2005, 11:35 PM

I dont know what brand it is, I bought it a few years ago. I do have new cap and rotor for it and a used coil. No price difference. Still $80 plus shipping.

By the way, if anyone is interested in anything else, I will be shipping all of the small stuff. I dont want to ship any body parts. As always, buyer pays shipping costs.

Ice68 · 03-03-2005, 02:17 AM

Hello,
I'm interested in the McGaughys drop spindles for my '68 or '72 Chevy Truck. I just need to find out who still living in SLC that I know

. Thinkin' about the hood, cowl, bedsides and doors for my dad's '67 he's getting ready to rebuild.
Thanks,
Leroy

Chevy Wrench · 03-03-2005, 11:08 AM

I can ship the spindles, but I think the cost would be too much. At the least, 2 boxes at about 40lbs each...??

Chevy Wrench · 03-04-2005, 12:19 AM

ttt

Chevy Wrench · 03-05-2005, 08:19 PM

ttt

Chevy Wrench · 03-07-2005, 12:45 AM

Ok guys ( and gals) time to get serious about selling this stuff. I can ship everything except the body panels. Those drop spindles are a smokin' deal!!! Brand new, never mounted, and just about everything you would need to convert to 5 lug disc brakes...$300.00 Just the spindles alone are $249.00 from McGaughys. You get 2 1/2" dropped spindles, new rotors, innner and outter bearings ( with all hardware), oil seals, 2 pair of loaded calipers, tie rod ends, upper and lower ball joints. The only thing I cant sell you is the time to install it all. Please note, this kit fits 63-70 1/2 ton trucks
Brand new billet HEI Dist. Cap, rotor, and a used coil. No, I dont know the brand. Blowin this one out. $85.00 SHIPPED!!!! within the lower 48.
I still have the one peice window kit. Might have it sold on Monday, will update. $250.00 + the ride. It is a Brothers kit, btw. SOLD
Everything else I have is way too big to ship.

LUV2XCLR8 · 03-13-2005, 08:27 PM

TTT, JUST BECAUSE I LIKE YOUR LOCATION PHRASE

Chevy Wrench · 03-13-2005, 02:53 PM

You're looking at about $70.00 for shipping. I have someone else interested in them. If the sale falls through, suville is next in line.

02-26-2005, 06:04 PM	#1
Chevy Wrench former desert rat Join Date: Feb 2003 Location: salt lake city, utah Home of the 3 M's Mormons, methlabs and minivans Posts: 320	Time To Sell Parts>>>good Deals Inside Hey everyone. I need to get rid of my 1967 project parts...so here is the list. Please note that the body parts must be local pick up only. Prices are firm. Please use my email address to contact me, jbfiske@hotmail.com 1 set of McGaughys 2 1/2 " drop spindles with rotors, bearings, seals, calipers Everything is brand new/ never mounted. $300.00 Smokin' deal SOLD 1 set of one peice windows, brand new. $250.00 ( Im not sure of the brand, I will have to check) Complete kit incl. glass, hardware and instructions. SOLD I have a set of doors with a little rust (repairable) and 6x9 holes at the bottom. $25.00 each Used windsheild cowl. $15.00 Used hood off 67 p/u. $25.00 Transmission TH 350 recently rebuilt $400.00 no shipping Used tailgate swb $25.00 Just updated. I was going through my stuff and found a brand new billet HEI distributor minus cap, rotor and coil. Selling cheap...$85.00 Shipping incl. within the 48 SMOKIN' DEAL!!!!!!!!!!!!!!!!!!!!!!!!!! Thanks for looking, if there is anything you need that I might have, please email me at jbfiske@hotmail.com Please do not pm me. I cant check it as offen as my email. You can also call me @ (801) 483-3192 9am-10pm Thanks again. John __________________ 94 Chevy Silverado Ext cab 4/6 drop w/ 18's and 2500watt system (work truck). 67 Chevy swb under const. frame off custom, 20's, bagged and a large rat under the hood,and a 1940 Chevy truck under const. Last edited by Chevy Wrench; 03-20-2005 at 06:41 PM.

02-26-2005, 06:20 PM	#2
aitch Senior Member Join Date: Sep 2004 Location: N.W. Arkansas Posts: 456	One piece windows I want to go to one piece windows. I am interested. Have you found the mfgr? aitch

02-26-2005, 07:39 PM	#3
hilljob26 Registered User Join Date: Dec 2004 Location: Gypsum Kansas 67448 Posts: 1,681	i am interseted in the one piece windows as well,is there anyone that will ship those for me,unless chevy wrench is willin to help a guy out,heck,if you were closer i trade ya a nos grill for em __________________ 21 2500hd duramax 58 apache HILLJOB GRAPHIX--for all your graphic needs My build thread http://67-72chevytrucks.com/vboard/s...d.php?t=542497 LS ENGINE SWAP INFORMATION THREAD http://67-72chevytrucks.com/vboard/s...d.php?t=377348 4l60 to an NP205 http://67-72chevytrucks.com/vboard/s...43#post3697343

02-26-2005, 07:46 PM	#4
Chevy Wrench former desert rat Join Date: Feb 2003 Location: salt lake city, utah Home of the 3 M's Mormons, methlabs and minivans Posts: 320	I think the kit is from Brothers, although Im not 100% sure. The reason Im selling the parts is because Im no longer going to build the truck and need money. I recently lost my job and need to pay bills and feed kids. By the way, if anyone in the Salt Lake area knows of any automotive repair shops looking for a good tech, let me know. I have over 15 years experiance. Plus I would work with you on the price of any parts you want if you hooked me up with a good job. __________________ 94 Chevy Silverado Ext cab 4/6 drop w/ 18's and 2500watt system (work truck). 67 Chevy swb under const. frame off custom, 20's, bagged and a large rat under the hood,and a 1940 Chevy truck under const.

02-26-2005, 08:36 PM	#6
HeavyD Senior Member Join Date: Sep 2004 Location: Wakaw, Sask, Canada Posts: 3,179	Hey does the grille, core support, and hood have any rust? I have a relative in Salt Lake..this might work for me. __________________ "You can take the man out of PA, but you can't take PA out of the man"

02-26-2005, 08:39 PM	#7
Chevy Wrench former desert rat Join Date: Feb 2003 Location: salt lake city, utah Home of the 3 M's Mormons, methlabs and minivans Posts: 320	I forgot to list the transmission I have. Its a TH350 rebuilt. I dont know all of the specs on it, but from what I have heard about it, it has been built for power. Never been installed after the rebuild. I will let it go for $400.00 __________________ 94 Chevy Silverado Ext cab 4/6 drop w/ 18's and 2500watt system (work truck). 67 Chevy swb under const. frame off custom, 20's, bagged and a large rat under the hood,and a 1940 Chevy truck under const.

02-26-2005, 08:44 PM	#8
Chevy Wrench former desert rat Join Date: Feb 2003 Location: salt lake city, utah Home of the 3 M's Mormons, methlabs and minivans Posts: 320	The grill, support and hood are in good condition. Just surface rust if any. The hood has holes drilled into it on the front edge. I dont know if they were for a bug deflector or for factory trim. But there is about 10 or 15 of them. Could be filled in very easily. I would post pics, but my camera was stolen about a month ago. Thanks. __________________ 94 Chevy Silverado Ext cab 4/6 drop w/ 18's and 2500watt system (work truck). 67 Chevy swb under const. frame off custom, 20's, bagged and a large rat under the hood,and a 1940 Chevy truck under const.

02-26-2005, 08:58 PM	#9
HeavyD Senior Member Join Date: Sep 2004 Location: Wakaw, Sask, Canada Posts: 3,179	I will take the core support and grille. Give me a day or so to get my nephew to pick them up. Thanks. __________________ "You can take the man out of PA, but you can't take PA out of the man"

02-27-2005, 01:33 AM	#10
Chevy Wrench former desert rat Join Date: Feb 2003 Location: salt lake city, utah Home of the 3 M's Mormons, methlabs and minivans Posts: 320	Heavy D, sent you an email. Thanks __________________ 94 Chevy Silverado Ext cab 4/6 drop w/ 18's and 2500watt system (work truck). 67 Chevy swb under const. frame off custom, 20's, bagged and a large rat under the hood,and a 1940 Chevy truck under const.

02-27-2005, 01:58 AM	#11
extd56 Senior Member Join Date: Nov 2004 Location: Vacaville, CA Posts: 2,272	What part numbers are the dropped spindles? Interested

02-27-2005, 06:56 PM	#12
hilljob26 Registered User Join Date: Dec 2004 Location: Gypsum Kansas 67448 Posts: 1,681	im tellin ya man,if you will ship this stuff,you will have the money you need right now,we are all willing to help you out as long as you can help us,think about it,theres alot of 67-72 junkies out here, __________________ 21 2500hd duramax 58 apache HILLJOB GRAPHIX--for all your graphic needs My build thread http://67-72chevytrucks.com/vboard/s...d.php?t=542497 LS ENGINE SWAP INFORMATION THREAD http://67-72chevytrucks.com/vboard/s...d.php?t=377348 4l60 to an NP205 http://67-72chevytrucks.com/vboard/s...43#post3697343

02-27-2005, 11:09 PM	#13
camaro__thunder Epoxy Primer Friendly Join Date: Feb 2004 Location: South of Houston TEXXXAS Posts: 680	1 piece woo hoo 4th in line for the windows ! if shipping is possible __________________ My Project 69 SWB SHAVED BAGGED DOORED

02-28-2005, 10:40 AM	#14
Chevy Wrench former desert rat Join Date: Feb 2003 Location: salt lake city, utah Home of the 3 M's Mormons, methlabs and minivans Posts: 320	Sorry guys, shipping is not an option at this time. BTW frame is now in 5 peices, sad to see it go like that. __________________ 94 Chevy Silverado Ext cab 4/6 drop w/ 18's and 2500watt system (work truck). 67 Chevy swb under const. frame off custom, 20's, bagged and a large rat under the hood,and a 1940 Chevy truck under const.

03-02-2005, 05:33 PM	#15
Chevy Wrench former desert rat Join Date: Feb 2003 Location: salt lake city, utah Home of the 3 M's Mormons, methlabs and minivans Posts: 320	ttt __________________ 94 Chevy Silverado Ext cab 4/6 drop w/ 18's and 2500watt system (work truck). 67 Chevy swb under const. frame off custom, 20's, bagged and a large rat under the hood,and a 1940 Chevy truck under const.

03-02-2005, 05:44 PM	#16
joelboxt 71 Cheyenne SWB Fleetside Join Date: Jan 2005 Location: Sarnia, Ontario, Canada Posts: 403	im interested in that distributor.. but you for sure will not ship that eh? what brand is it? __________________



Register or Log In To remove these advertisements.

03-02-2005, 11:14 PM	#17
Chevy Wrench former desert rat Join Date: Feb 2003 Location: salt lake city, utah Home of the 3 M's Mormons, methlabs and minivans Posts: 320	I guess I could ship the dist. Give me your zip to see how much the ride would be. __________________ 94 Chevy Silverado Ext cab 4/6 drop w/ 18's and 2500watt system (work truck). 67 Chevy swb under const. frame off custom, 20's, bagged and a large rat under the hood,and a 1940 Chevy truck under const.

03-02-2005, 11:35 PM	#18
Chevy Wrench former desert rat Join Date: Feb 2003 Location: salt lake city, utah Home of the 3 M's Mormons, methlabs and minivans Posts: 320	I dont know what brand it is, I bought it a few years ago. I do have new cap and rotor for it and a used coil. No price difference. Still $80 plus shipping. By the way, if anyone is interested in anything else, I will be shipping all of the small stuff. I dont want to ship any body parts. As always, buyer pays shipping costs. __________________ 94 Chevy Silverado Ext cab 4/6 drop w/ 18's and 2500watt system (work truck). 67 Chevy swb under const. frame off custom, 20's, bagged and a large rat under the hood,and a 1940 Chevy truck under const.

03-03-2005, 02:17 AM	#19
Ice68 Registered User Join Date: Dec 2003 Location: NW New Mexico Posts: 236	Hello, I'm interested in the McGaughys drop spindles for my '68 or '72 Chevy Truck. I just need to find out who still living in SLC that I know . Thinkin' about the hood, cowl, bedsides and doors for my dad's '67 he's getting ready to rebuild. Thanks, Leroy __________________ '68 Chevy Truck C10 LWB 292 engine 3spd Tranny Everything Stock except for shaved bodywork. '72 Chevy Truck Custom Deluxe 2WD LWB 350/350 HEI Tilt PS AC Dual Exhaust Last edited by Ice68; 03-03-2005 at 02:26 AM.

03-03-2005, 11:08 AM	#20
Chevy Wrench former desert rat Join Date: Feb 2003 Location: salt lake city, utah Home of the 3 M's Mormons, methlabs and minivans Posts: 320	I can ship the spindles, but I think the cost would be too much. At the least, 2 boxes at about 40lbs each...?? __________________ 94 Chevy Silverado Ext cab 4/6 drop w/ 18's and 2500watt system (work truck). 67 Chevy swb under const. frame off custom, 20's, bagged and a large rat under the hood,and a 1940 Chevy truck under const.

03-04-2005, 12:19 AM	#21
Chevy Wrench former desert rat Join Date: Feb 2003 Location: salt lake city, utah Home of the 3 M's Mormons, methlabs and minivans Posts: 320	ttt __________________ 94 Chevy Silverado Ext cab 4/6 drop w/ 18's and 2500watt system (work truck). 67 Chevy swb under const. frame off custom, 20's, bagged and a large rat under the hood,and a 1940 Chevy truck under const.

03-05-2005, 08:19 PM	#22
Chevy Wrench former desert rat Join Date: Feb 2003 Location: salt lake city, utah Home of the 3 M's Mormons, methlabs and minivans Posts: 320	ttt __________________ 94 Chevy Silverado Ext cab 4/6 drop w/ 18's and 2500watt system (work truck). 67 Chevy swb under const. frame off custom, 20's, bagged and a large rat under the hood,and a 1940 Chevy truck under const.

03-07-2005, 12:45 AM	#23
Chevy Wrench former desert rat Join Date: Feb 2003 Location: salt lake city, utah Home of the 3 M's Mormons, methlabs and minivans Posts: 320	Ok guys ( and gals) time to get serious about selling this stuff. I can ship everything except the body panels. Those drop spindles are a smokin' deal!!! Brand new, never mounted, and just about everything you would need to convert to 5 lug disc brakes...$300.00 Just the spindles alone are $249.00 from McGaughys. You get 2 1/2" dropped spindles, new rotors, innner and outter bearings ( with all hardware), oil seals, 2 pair of loaded calipers, tie rod ends, upper and lower ball joints. The only thing I cant sell you is the time to install it all. Please note, this kit fits 63-70 1/2 ton trucks Brand new billet HEI Dist. Cap, rotor, and a used coil. No, I dont know the brand. Blowin this one out. $85.00 SHIPPED!!!! within the lower 48. I still have the one peice window kit. Might have it sold on Monday, will update. $250.00 + the ride. It is a Brothers kit, btw. SOLD Everything else I have is way too big to ship. __________________ 94 Chevy Silverado Ext cab 4/6 drop w/ 18's and 2500watt system (work truck). 67 Chevy swb under const. frame off custom, 20's, bagged and a large rat under the hood,and a 1940 Chevy truck under const. Last edited by Chevy Wrench; 03-09-2005 at 09:31 PM.

03-13-2005, 08:27 PM	#24
LUV2XCLR8 The LuvShack Garage Join Date: Jan 2004 Location: Maple Grove, TN (West Side) Posts: 30,475	TTT, JUST BECAUSE I LIKE YOUR LOCATION PHRASE __________________ Owner/Op: "TN Classic Transport Carriers" The Toy: "Square Vette" 72 Hybrid Blazer Toy Barn: "LuvShack" 40 x 60 x 20 Shop Big Piggy: "Goliath" 07 Kodiak C4500 Lil Piggy:"Maddy" 88 Silverado 3500 Hauler: "Feathers" 14 Aluma 8218T

03-13-2005, 02:53 PM	#25
Chevy Wrench former desert rat Join Date: Feb 2003 Location: salt lake city, utah Home of the 3 M's Mormons, methlabs and minivans Posts: 320	You're looking at about $70.00 for shipping. I have someone else interested in them. If the sale falls through, suville is next in line. __________________ 94 Chevy Silverado Ext cab 4/6 drop w/ 18's and 2500watt system (work truck). 67 Chevy swb under const. frame off custom, 20's, bagged and a large rat under the hood,and a 1940 Chevy truck under const.

Register or Log In To remove these advertisements.