68 Truck Parts in KY - The 1947 - Present Chevrolet & GMC Truck Message Board Network

jtmiller92 · 02-28-2005, 10:31 AM

I am fairly new to the truck scene but in the last month I have come into alot of good parts while trying to find parts for my 72. I just picked up a 68LWB Chevy TRuck with passenger side front end damage.
I have 1 Non AC Cabs (68) $100 Picked up. Not completely rust free but in good shape. Can get pics.
I have 1 power steering set ups( from 72 V8). $75.00. Includes Steering Box, Pump, Lines, crank pulley.
Non AC heater Boxes and anything else heat related. $25 each plus shipping.
1 complete set of 5 lug rallys.(from 88 GMC) $100
I have a few complete trucks so if you need something just ask.

Also have a SBC Holley street Dominator intake in great condition
shipped and a HEI distributor. (Sale Pending on Both Intake and HEI)

68 Drum 12 bolt rear with 4.11 gears. SOLD
68 Drum 12 bolt rear with 3.73 Gears $150 obo

4 doors with glass. $25.00 each
68 Drivers fender $25.00(Sale Pending)
68-72 Rear Solid window $20

69ShortStep · 02-28-2005, 10:42 AM

I am interested in the 68 power steering setup for the 6cyl ( I hope it is from a 250 nonintegrated ) and the 5lug ralleys. Will they fit a 72 2wd lug pattern?

jtmiller92 · 02-28-2005, 07:59 PM

Quote:

Originally Posted by 69ShortStep

I am interested in the 68 power steering setup for the 6cyl ( I hope it is from a 250 nonintegrated ) and the 5lug ralleys. Will they fit a 72 2wd lug pattern?

Not sure what non integrated means, the wheels are from an 88. I dont know for sure what the backspacing is. I know the 18" Eagle Alloys I have on the 88 also fit my 72 Frame. They are all 5x5 bolt pattern........jt

[IMG]

[/IMG]

69ShortStep · 02-28-2005, 09:17 PM

thanks for your response. I was referring to the integrated or non-integrated head. On later model I6 engines they were integrated into 1 piece. My 250 is the non-integrated where the exhaust manifold comes apart. Do you know what size I6 was in this truck (250 or 292)?

Also, do you have pics of the 5-lug ralleys? My bolt pattern is 4 3/4 inches if you skip a bolt and 3 inches apart from lug to lug.

I am still very interested if we can sort things out.

jtmiller92 · 02-28-2005, 11:20 PM

The engine was a 250, there was a crank pulley in the bed of the truck, i am pretty sure it was from the engine. I will throw that in as well if you need it. I will try and get you some pics of the 5 lug Rallys tomorrow. There were pics of the rallys on the 88-98 parts board under 88 GMC $3000 obo. I bought the truck with two sets of wheels, the rallys and the prime 5 stars and wont be using either sets.........jt

Tynee · 03-01-2005, 09:15 AM

Not really in need of any of that, but if you are that close, I definitely need to come see what else you've got that I REALLY need.

srhart71 · 02-28-2005, 11:30 AM

Please send pictures of the cabs to
srhart71@hotmail.com

da-burb · 02-28-2005, 12:30 PM

Put me second inline for the inline power steering items. thanks,

cobb_ben · 03-01-2005, 11:54 AM

Should be a non-intrigal 250, at least if it's the orginal engine. The PS is attached to a 67-72 truck frame and the 67-72 had non intrigal 250s, i belive, know 69 was for sure pretty sure at least to 72 was. Well that's just my $.02

69ShortStep · 03-01-2005, 02:44 PM

I will take the I6 power steering setup ( including the crank pulley ). Could you get me shipping costs to Central, OH (43112)? I am still interested in the 5-lug ralleys. Please email the shipping cost of the PS system and pics of the ralleys to becshaw@columbus.rr.com.

Thanks,
Shawn

jtmiller92 · 03-01-2005, 06:02 PM

69shortstep, you have mail.................jt

jay6891 · 03-01-2005, 06:34 PM

off topic but say hello to RJ Corman for me.

jtmiller92 · 03-08-2005, 10:26 AM

Quote:

Originally Posted by jay6891

off topic but say hello to RJ Corman for me.

Lol, The only time I see RJ is when he is flying over my house in his Leer Jet landing on or taking off from his Private Airstrip that is on the 60% of Nicholasville that he owns. Man I wish I had 10% of the Money he has. Just to make everyone jealous he put an airplane hanger next to the bypass with clear windows to show off his 2 Jets, and 2 Choppers. I would love to have access to his landing strip though. I few full throttle runs up and down that thing would be sweet.

Inspector722 · 03-08-2005, 10:58 AM

How good a shape is the driver front 68 fender and cabs? If you can, send pics to inspector722@aol.com

jtmiller92 · 03-08-2005, 09:31 PM

Quote:

Originally Posted by Inspector722

How good a shape is the driver front 68 fender and cabs? If you can, send pics to inspector722@aol.com

The drivers front fender and cabs are in decent shape for the southeast but compared to what you find in or around TX are probably not worth your time but if you still want pics I can send some your way.........jt

Mike, I still have the HEI. If you want it you can send me money via Paypal or Money Order. PM me for more info............jt

jtmiller92 · 03-09-2005, 05:37 PM

HEI and Intake are pending sale.

I just picked up a 69 LWB Frame with some extras on it. Now have another Power Streering box, Auto Trans Crossmember, 12 Bolt 6 Lug rear, Nice Set of trailing arms and front sway bar. also have Misc front drum a-arms, spindles etc. Frame is pretty clean, looks like soemone stripped and painted it a few years ago..................jt

toby72gmc · 03-09-2005, 07:30 PM

I am interested in a driver side door if you have one

69ChevyLB · 03-09-2005, 08:52 PM

Looking for black 72 arm rests and a 72 drivers side door handle remote if you have any.

jtmiller92 · 03-10-2005, 12:53 PM

Quote:

Originally Posted by 69ChevyLB

Looking for black 72 arm rests and a 72 drivers side door handle remote if you have any.

Sorry I dont have any 72 armrests, not sure what the door handle remote is? I might have it...............jt

shane's67 · 03-09-2005, 09:00 PM

i would like to look at your parts will be in lexington tommorrow i will try to call

jtmiller92 · 03-10-2005, 12:52 PM

Quote:

Originally Posted by toby72gmc

I am interested in a driver side door if you have one

I have two drivers side doors but are spoken for at this time, if he decides not to take them I will let you know................jt

bagged91 · 03-09-2005, 11:06 PM

Interested in 68 drivers fender... Could you shoot me some pics to: joeking1104@msn.com

Also, need a price with shipping to NJ 08071...

L8R - Joe

jtmiller92 · 03-10-2005, 12:54 PM

Quote:

Originally Posted by bagged91

Interested in 68 drivers fender... Could you shoot me some pics to: joeking1104@msn.com

Also, need a price with shipping to NJ 08071...

L8R - Joe

Joe, I will check on the fender for you but it may be spoken for already....jt

69ChevyLB · 03-10-2005, 11:12 PM

The door handle remote AKA relay is the thingy the inside door handle attaches to. Need the drivers side for 72.

shadow20 · 04-02-2005, 06:49 PM

Do you have a seat for that 68? Also, looking for 6 door hinge bolts.

02-28-2005, 10:31 AM	#1
jtmiller92 Registered User Join Date: Jan 2005 Location: Nicholasville, KY 40356 Posts: 461	68 Truck Parts in KY I am fairly new to the truck scene but in the last month I have come into alot of good parts while trying to find parts for my 72. I just picked up a 68LWB Chevy TRuck with passenger side front end damage. I have 1 Non AC Cabs (68) $100 Picked up. Not completely rust free but in good shape. Can get pics. I have 1 power steering set ups( from 72 V8). $75.00. Includes Steering Box, Pump, Lines, crank pulley. Non AC heater Boxes and anything else heat related. $25 each plus shipping. 1 complete set of 5 lug rallys.(from 88 GMC) $100 I have a few complete trucks so if you need something just ask. Also have a SBC Holley street Dominator intake in great condition shipped and a HEI distributor. (Sale Pending on Both Intake and HEI) 68 Drum 12 bolt rear with 4.11 gears. SOLD 68 Drum 12 bolt rear with 3.73 Gears $150 obo 4 doors with glass. $25.00 each 68 Drivers fender $25.00(Sale Pending) 68-72 Rear Solid window $20 __________________ 2011 Camaro 1SS LS3/6 Speed Last edited by jtmiller92; 03-19-2005 at 01:43 PM. Reason: Updated List

02-28-2005, 11:20 PM	#5
jtmiller92 Registered User Join Date: Jan 2005 Location: Nicholasville, KY 40356 Posts: 461	The engine was a 250, there was a crank pulley in the bed of the truck, i am pretty sure it was from the engine. I will throw that in as well if you need it. I will try and get you some pics of the 5 lug Rallys tomorrow. There were pics of the rallys on the 88-98 parts board under 88 GMC $3000 obo. I bought the truck with two sets of wheels, the rallys and the prime 5 stars and wont be using either sets.........jt __________________ 2011 Camaro 1SS LS3/6 Speed

03-01-2005, 09:15 AM	#6
Tynee I miss this truck. Join Date: Dec 2001 Location: Lexington, KY U.S.A. Posts: 2,863	Not really in need of any of that, but if you are that close, I definitely need to come see what else you've got that I REALLY need. __________________ '07 GMC Acadia SLT. Sweet ride. '08 Crew Cab Z-71 short bed. Really like this truck A LOT.

02-28-2005, 12:30 PM	#8
da-burb "Ochre Ogre" Join Date: Apr 2000 Location: Springfield, MN Posts: 3,558	Put me second inline for the inline power steering items. thanks, __________________ Bowtie Truck Stop Inc. Mid-West GM Truck Restoration Parts Supplier Your Key Parts, Auto Metal Direct, Dynacorn, and Goodmark dealer. like us @ www.facebook.com/BowtieTruckStop 1971 C-10 Suburban (Ochre) 1971 K-10 Suburban (Ochre) 1972 C-10 Suburban (Ochre) 1972 K-20 Suburban (Yellow- that just aint right!) Springfield, Minnesota 56087

03-01-2005, 02:44 PM	#10
69ShortStep Registered User Join Date: Jan 2004 Location: Canal Winchester, OH Posts: 143	I will take the I6 power steering setup ( including the crank pulley ). Could you get me shipping costs to Central, OH (43112)? I am still interested in the 5-lug ralleys. Please email the shipping cost of the PS system and pics of the ralleys to becshaw@columbus.rr.com. Thanks, Shawn Last edited by 69ShortStep; 03-01-2005 at 03:19 PM.

02-28-2005, 10:42 AM	#2
69ShortStep Registered User Join Date: Jan 2004 Location: Canal Winchester, OH Posts: 143	I am interested in the 68 power steering setup for the 6cyl ( I hope it is from a 250 nonintegrated ) and the 5lug ralleys. Will they fit a 72 2wd lug pattern?

02-28-2005, 09:17 PM	#4
69ShortStep Registered User Join Date: Jan 2004 Location: Canal Winchester, OH Posts: 143	thanks for your response. I was referring to the integrated or non-integrated head. On later model I6 engines they were integrated into 1 piece. My 250 is the non-integrated where the exhaust manifold comes apart. Do you know what size I6 was in this truck (250 or 292)? Also, do you have pics of the 5-lug ralleys? My bolt pattern is 4 3/4 inches if you skip a bolt and 3 inches apart from lug to lug. I am still very interested if we can sort things out.

02-28-2005, 11:30 AM	#7
srhart71 Registered User Join Date: Jul 2002 Location: China Grove, NC Posts: 147	Please send pictures of the cabs to srhart71@hotmail.com

03-01-2005, 11:54 AM	#9
cobb_ben Registered User Join Date: Feb 2004 Location: Fort Leonard Wood Mo Posts: 299	Should be a non-intrigal 250, at least if it's the orginal engine. The PS is attached to a 67-72 truck frame and the 67-72 had non intrigal 250s, i belive, know 69 was for sure pretty sure at least to 72 was. Well that's just my $.02

03-01-2005, 06:02 PM	#11
jtmiller92 Registered User Join Date: Jan 2005 Location: Nicholasville, KY 40356 Posts: 461	69shortstep, you have mail.................jt __________________ 2011 Camaro 1SS LS3/6 Speed

03-01-2005, 06:34 PM	#12
jay6891 Car Knocker Join Date: May 2001 Location: jefferson,arkansas Posts: 664	off topic but say hello to RJ Corman for me. __________________ 68 c-10,91 sportside bed,350 .030 over,4 bolt,10-1 comp,2.05 intake/1.94 exhaust,1.6 Harland Sharp roller rockers,edelbrock rpm cam and intake w/750 carb, 700r4, 3.73 gears,Jacabbs Electronic Igntion w/Accel HEI distributer and super coil. ZR-1 roll pan, filled tailights. Blazer tank. Hidden hitch. 2 1/2" Flowmaster 40's. Parts bought but not installed>> ford 9" posi with disc. CCP front and rear lowering kit 4/5. Cab corners,foor boards,rockers, cab braces, Phatom grill, Painless wiring kit.

03-08-2005, 10:58 AM	#14
Inspector722 Fixing my 67, & loving it Join Date: Jun 2004 Location: Bridge City, Texas Posts: 524	How good a shape is the driver front 68 fender and cabs? If you can, send pics to inspector722@aol.com __________________ Email address- inspector722@aol.com Zip Code- 77611 Shipping- DHL & USPS Working on: 67, large back glass, 307 V8, 200 4R, 3.73 rearend, Short Stepside Bed

03-09-2005, 05:37 PM	#16
jtmiller92 Registered User Join Date: Jan 2005 Location: Nicholasville, KY 40356 Posts: 461	HEI and Intake are pending sale. I just picked up a 69 LWB Frame with some extras on it. Now have another Power Streering box, Auto Trans Crossmember, 12 Bolt 6 Lug rear, Nice Set of trailing arms and front sway bar. also have Misc front drum a-arms, spindles etc. Frame is pretty clean, looks like soemone stripped and painted it a few years ago..................jt __________________ 2011 Camaro 1SS LS3/6 Speed

03-09-2005, 07:30 PM	#17
toby72gmc Registered User Join Date: Feb 2005 Posts: 4	I am interested in a driver side door if you have one

03-09-2005, 08:52 PM	#18
69ChevyLB Active Member Join Date: Aug 2004 Location: Canton, OH Posts: 249	Looking for black 72 arm rests and a 72 drivers side door handle remote if you have any. __________________ 69 C10 LWB Project 47 Cushman Scooter Project It is better to have loved and lost than to live with a psycho all your life.



Register or Log In To remove these advertisements.

03-09-2005, 09:00 PM	#20
shane's67 Registered User Join Date: Feb 2005 Location: berea,ky. Posts: 16	parts i would like to look at your parts will be in lexington tommorrow i will try to call

03-09-2005, 11:06 PM	#22
bagged91 Out draggin' Join Date: Jan 2004 Location: Pitman,NJ Posts: 1,574	Interested in 68 drivers fender... Could you shoot me some pics to: joeking1104@msn.com Also, need a price with shipping to NJ 08071... L8R - Joe __________________ 91 GMC Xcab LB-Bags/bd/caddy clip SOLD 72 C10 Cheyenne Super LWB SOLD 92 GMC K1500 Burb 72 C10 Burb (ex. Cheesewagon)SOLD 72 C20 Burb parts truck 71 C10 Burb "project"

03-10-2005, 11:12 PM	#24
69ChevyLB Active Member Join Date: Aug 2004 Location: Canton, OH Posts: 249	The door handle remote AKA relay is the thingy the inside door handle attaches to. Need the drivers side for 72. __________________ 69 C10 LWB Project 47 Cushman Scooter Project It is better to have loved and lost than to live with a psycho all your life.

04-02-2005, 06:49 PM	#25
shadow20 Registered User Join Date: Apr 2005 Location: SC Posts: 14	Looking for parts Do you have a seat for that 68? Also, looking for 6 door hinge bolts.

Register or Log In To remove these advertisements.