72 k10 project for sale - The 1947 - Present Chevrolet & GMC Truck Message Board Network

1972chevy4x4 · 03-07-2005, 02:24 AM

May sell my two year project to fund my new project (swb) and am looking to see if there is any interest. Here goes a list of what it has and what has been done:
72 chevy k10 frame sand blasted and POR-15 the entire frame. Trashed the original bed and cab and replaced with pictured cab and bed. The cab has one small hole in floor above the drivers rear cab mount about the size of a fifty cent piece. Interior of truck is bare with the eception of the under dash wiring. I then purchased a brand new 4 inch lift kit with all new springs all the way around with new hecklehorn shocks (kit from tuff country). I put front and rear 3.73 ratio gears into the truck (I believe non-posi) and had the transmission rebult by a reputible trans shop (575.00) with shift kit and heavy duty clutches. Put a 350 4-bolt motor in with less than two thousand since rebuild (hi-pro cam, 2.02 heads, flat tops, etc). Has new edelbrock carb and air gap intake (I will be keeping the air cleaner and the valve covers and the billet pulleys). I had the radiator reconditioned (4 core). Truck also has four outlaw II rims with 33x12x15 bf goodwrench tires on them. I have an extra set of doors to go with truck so you don't have to used the shaved doors and also a much better tail gate to go with the truck. A so-so grill shell and inner grill goes with truck, brand new front drive shaft, and various other parts. Like I said don't really want to get rid of truck but my friend who was helping me build the truck died in a horrible car accident about four months ago and I have just lost my desire for this project. I have around 4000.00 in the truck and I know I will not recoop all of that but am looking around 2000.00 for the truck now if interest is there. Also no windshield but have brand new slider for back. Dan

1972chevy4x4 · 03-07-2005, 02:27 AM

one more

1972chevy4x4 · 03-07-2005, 02:28 AM

and again

HuggerCST · 03-07-2005, 10:38 AM

Looks like a good deal for someone!

J.Lance · 03-07-2005, 11:31 AM

Quote:

Originally Posted by HuggerCST

Looks like a good deal for someone!

My thought exactly. Looks to be very clean and a great value. Sorry to here about the loss of your friend.

1972chevy4x4 · 03-07-2005, 12:05 PM

Thanks,
He was a great freind and wish he could have helped me finish. I will be finishing his project car to give to his daughter, but I just can't bring myself into finishing mine. TTT Dan

**ScottH** · 03-07-2005, 12:07 PM

PM sent

03-07-2005, 02:24 AM	#1
1972chevy4x4 Registered User Join Date: Feb 2003 Location: Wichita Kansas Posts: 223	72 k10 project for sale May sell my two year project to fund my new project (swb) and am looking to see if there is any interest. Here goes a list of what it has and what has been done: 72 chevy k10 frame sand blasted and POR-15 the entire frame. Trashed the original bed and cab and replaced with pictured cab and bed. The cab has one small hole in floor above the drivers rear cab mount about the size of a fifty cent piece. Interior of truck is bare with the eception of the under dash wiring. I then purchased a brand new 4 inch lift kit with all new springs all the way around with new hecklehorn shocks (kit from tuff country). I put front and rear 3.73 ratio gears into the truck (I believe non-posi) and had the transmission rebult by a reputible trans shop (575.00) with shift kit and heavy duty clutches. Put a 350 4-bolt motor in with less than two thousand since rebuild (hi-pro cam, 2.02 heads, flat tops, etc). Has new edelbrock carb and air gap intake (I will be keeping the air cleaner and the valve covers and the billet pulleys). I had the radiator reconditioned (4 core). Truck also has four outlaw II rims with 33x12x15 bf goodwrench tires on them. I have an extra set of doors to go with truck so you don't have to used the shaved doors and also a much better tail gate to go with the truck. A so-so grill shell and inner grill goes with truck, brand new front drive shaft, and various other parts. Like I said don't really want to get rid of truck but my friend who was helping me build the truck died in a horrible car accident about four months ago and I have just lost my desire for this project. I have around 4000.00 in the truck and I know I will not recoop all of that but am looking around 2000.00 for the truck now if interest is there. Also no windshield but have brand new slider for back. Dan Attached Images __________________ 1972 chevy k10 4x4 longbed 4-inch lift, 3.73 front/rears, frame off nearly complete 1972 chevy k10 4x4 longbed parts truck, known as the "ugly green machine" 1990 GMC 3/4 shortbed ext cab Always in need of 67-72 parts in central ks.

03-07-2005, 02:27 AM	#2
1972chevy4x4 Registered User Join Date: Feb 2003 Location: Wichita Kansas Posts: 223	one more Attached Images __________________ 1972 chevy k10 4x4 longbed 4-inch lift, 3.73 front/rears, frame off nearly complete 1972 chevy k10 4x4 longbed parts truck, known as the "ugly green machine" 1990 GMC 3/4 shortbed ext cab Always in need of 67-72 parts in central ks.

03-07-2005, 02:28 AM	#3
1972chevy4x4 Registered User Join Date: Feb 2003 Location: Wichita Kansas Posts: 223	and again Attached Images __________________ 1972 chevy k10 4x4 longbed 4-inch lift, 3.73 front/rears, frame off nearly complete 1972 chevy k10 4x4 longbed parts truck, known as the "ugly green machine" 1990 GMC 3/4 shortbed ext cab Always in need of 67-72 parts in central ks.

03-07-2005, 10:38 AM	#4
HuggerCST Registered User Join Date: Jul 2001 Location: North Louisiana Posts: 4,501	Looks like a good deal for someone! __________________ Wynne 70 CST short fleet Hugger orange & white, 350/350, ps, pb, air, tilt, tach/vac/speedwarning, original buckets, AM/FM, oak bed floor, shoulder belts, 3.5"/5.5" drop, 20" American Racing VN425s. Build thread 53 Chevy shortbed 69 Camaro Click here to subscribe Chevy GMC International Truck Club Louisiana Charter Member http://www.louisianaclassictruckclub.com

03-07-2005, 12:05 PM	#6
1972chevy4x4 Registered User Join Date: Feb 2003 Location: Wichita Kansas Posts: 223	Thanks, He was a great freind and wish he could have helped me finish. I will be finishing his project car to give to his daughter, but I just can't bring myself into finishing mine. TTT Dan __________________ 1972 chevy k10 4x4 longbed 4-inch lift, 3.73 front/rears, frame off nearly complete 1972 chevy k10 4x4 longbed parts truck, known as the "ugly green machine" 1990 GMC 3/4 shortbed ext cab Always in need of 67-72 parts in central ks.

03-07-2005, 12:07 PM	#7
ScottH Senior Member Join Date: Sep 2002 Location: Hampstead, NC Posts: 8,190	PM sent



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.