Looking for some parts for my '71.... - The 1947 - Present Chevrolet & GMC Truck Message Board Network

71cadc10 · 03-07-2005, 06:43 PM

Need a few odds and ends, thought I'd give it a shot to see if anyone has some of this stuff laying around they won't use, either new or in good used condition, before I start ordering....

Upper A-arm shaft studs that mount the shaft to the frame (2 studs needed)

Drivers side upper A-arm

Dust shields for front disc brake spindles '71 L&R

L&R side inner and outer tie rod ends (new)

Stock height C10 front coil springs, for BB application

4" drop rear C10 coil springs

1 pair of the mounting "cups" for the rear coil springs

03-07-2005, 06:43 PM	#1
71cadc10 Registered User Join Date: Apr 2004 Location: Boiling Springs, PA Posts: 435	Looking for some parts for my '71.... Need a few odds and ends, thought I'd give it a shot to see if anyone has some of this stuff laying around they won't use, either new or in good used condition, before I start ordering.... Upper A-arm shaft studs that mount the shaft to the frame (2 studs needed) Drivers side upper A-arm Dust shields for front disc brake spindles '71 L&R L&R side inner and outer tie rod ends (new) Stock height C10 front coil springs, for BB application 4" drop rear C10 coil springs 1 pair of the mounting "cups" for the rear coil springs __________________ 71 C10 long bed, 2003 6.0L, 06GTO E40, T56, 12bolt 4.10 rear



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.