Blazer Seat Set F/S - The 1947 - Present Chevrolet & GMC Truck Message Board Network

DruBlazer · 03-11-2005, 03:31 PM

I thought I'd try selling these first here.
Details:
The 2 front have been redone. They kinda have a velvety top and vinyl sides. The driver seat has some small creasing on the outside and the pass side has a little scratching on the back cover. Besides that they are good. They are totally complete with all pieces. No dents in the backs.
The rear has a cover on what appears to be the original vinyl. I don't know it's condition as I haven't taken the cover off. The arm rests are not split and they have both of the ash trays in them. I don't have the front brackets for the back seat.
I would rather not ship them so there are local pick up only. Sorry.
I'm about 20 miles east of Sacramento 2 minutes off I80.

I'm asking $350 obo for the set. I really don't want to split them up, but will If I have to. I'll entertain trades for partial or full amount. I need 3/4T or 1T running gear, rear chrome trim, or rear 4" lift springs just to name a few things. Let me know.

Here's some Pics. I have more it you need me to email them.

DruBlazer · 03-17-2005, 11:51 AM

Still got 'em.
Trade???

DruBlazer · 03-18-2005, 09:16 PM

Still got em.

Bump

DruBlazer · 03-25-2005, 08:12 PM

Ttt

DruBlazer · 04-01-2005, 02:06 PM

Still here.
Anyone?

I tried to figure out how to move this to the parts board. I couldn't figure it out. Can I do it, or do I need to have an admin do it?

DruBlazer · 04-22-2005, 11:14 AM

Offers...
Trades...

blazerparts · 04-22-2005, 01:23 PM

I'm looking for buckets for a '69 GMC 3500. I believe blazer seats would fit with mods, no? As such, I wouldn't be interested in the rear seat. I also have a blazer tailgate trim band. It is a repro in good condition, one small ding and it has been modified with 1/4" oak strip in lieu of the woodgrain tape. The paint could use a touch-up and the letters are still shiney with some pitting. Depending on being able to adapt these seats to my application, would you accept $100 plus the tailgate band for the two front seats?

DruBlazer · 04-25-2005, 07:34 PM

I don't need a rear trim piece. But thanks anyhow. I don't know if these seats will fit in your truck. I'm not too familiar with the pick ups. Let me know if you are still interested.

blazerparts · 04-26-2005, 10:50 AM

Lemme look tonight to see if blazer seats could adapt to truck.

71jimmy · 04-27-2005, 11:43 PM

DruBlazer, sent you a PM.

DruBlazer · 04-28-2005, 04:03 PM

71Jimmy... Sent you one back.

DruBlazer · 05-17-2005, 12:38 PM

Still got 'em.
TTT

DruBlazer · 06-11-2005, 02:15 AM

These look great in my kids playroom, but I think they belong in someones ride. Lemme know....

**Steven B** · 06-11-2005, 07:10 PM

PM sent

03-11-2005, 03:31 PM	#1
DruBlazer Got Blazer? Join Date: Oct 2004 Location: Newcastle, California Posts: 76	Blazer Seat Set F/S I thought I'd try selling these first here. Details: The 2 front have been redone. They kinda have a velvety top and vinyl sides. The driver seat has some small creasing on the outside and the pass side has a little scratching on the back cover. Besides that they are good. They are totally complete with all pieces. No dents in the backs. The rear has a cover on what appears to be the original vinyl. I don't know it's condition as I haven't taken the cover off. The arm rests are not split and they have both of the ash trays in them. I don't have the front brackets for the back seat. I would rather not ship them so there are local pick up only. Sorry. I'm about 20 miles east of Sacramento 2 minutes off I80. I'm asking $350 obo for the set. I really don't want to split them up, but will If I have to. I'll entertain trades for partial or full amount. I need 3/4T or 1T running gear, rear chrome trim, or rear 4" lift springs just to name a few things. Let me know. Here's some Pics. I have more it you need me to email them. Last edited by DruBlazer; 03-11-2005 at 04:37 PM.

03-17-2005, 11:51 AM	#2
DruBlazer Got Blazer? Join Date: Oct 2004 Location: Newcastle, California Posts: 76	bump Still got 'em. Trade???

04-22-2005, 11:14 AM	#6
DruBlazer Got Blazer? Join Date: Oct 2004 Location: Newcastle, California Posts: 76	btt Offers... Trades...

04-22-2005, 01:23 PM	#7
blazerparts No,I DON'T have Tourett's Join Date: Mar 2005 Location: Reno, NV Posts: 556	I'm looking for buckets for a '69 GMC 3500. I believe blazer seats would fit with mods, no? As such, I wouldn't be interested in the rear seat. I also have a blazer tailgate trim band. It is a repro in good condition, one small ding and it has been modified with 1/4" oak strip in lieu of the woodgrain tape. The paint could use a touch-up and the letters are still shiney with some pitting. Depending on being able to adapt these seats to my application, would you accept $100 plus the tailgate band for the two front seats? __________________ '72 K5 CST 350/350 Daily Driver '69 GMC3500 Camper Special CST Flatbed 396/400 Upgraded to show truck '69 GMC 2500 L6292, 3spd beater

04-25-2005, 07:34 PM	#8
DruBlazer Got Blazer? Join Date: Oct 2004 Location: Newcastle, California Posts: 76	No thanks I don't need a rear trim piece. But thanks anyhow. I don't know if these seats will fit in your truck. I'm not too familiar with the pick ups. Let me know if you are still interested.

03-18-2005, 09:16 PM	#3
DruBlazer Got Blazer? Join Date: Oct 2004 Location: Newcastle, California Posts: 76	Still got em. Bump

03-25-2005, 08:12 PM	#4
DruBlazer Got Blazer? Join Date: Oct 2004 Location: Newcastle, California Posts: 76	Ttt

04-01-2005, 02:06 PM	#5
DruBlazer Got Blazer? Join Date: Oct 2004 Location: Newcastle, California Posts: 76	Still here. Anyone? I tried to figure out how to move this to the parts board. I couldn't figure it out. Can I do it, or do I need to have an admin do it?

04-26-2005, 10:50 AM	#9
blazerparts No,I DON'T have Tourett's Join Date: Mar 2005 Location: Reno, NV Posts: 556	Lemme look tonight to see if blazer seats could adapt to truck. __________________ '72 K5 CST 350/350 Daily Driver '69 GMC3500 Camper Special CST Flatbed 396/400 Upgraded to show truck '69 GMC 2500 L6292, 3spd beater

04-27-2005, 11:43 PM	#10
71jimmy Registered User Join Date: Mar 2004 Location: Sacramento, CA Posts: 1,083	DruBlazer, sent you a PM. __________________ '71 Jimmy, 350, SM465, NP205, 2in Tuff Country lift, 33s on rallies, TBI, softtop and hardtop "If life was fair you'd be able to afford one of each and a garage large enough to house them all."

04-28-2005, 04:03 PM	#11
DruBlazer Got Blazer? Join Date: Oct 2004 Location: Newcastle, California Posts: 76	71Jimmy... Sent you one back.

05-17-2005, 12:38 PM	#12
DruBlazer Got Blazer? Join Date: Oct 2004 Location: Newcastle, California Posts: 76	Still got 'em. TTT

06-11-2005, 02:15 AM	#13
DruBlazer Got Blazer? Join Date: Oct 2004 Location: Newcastle, California Posts: 76	These look great in my kids playroom, but I think they belong in someones ride. Lemme know....

06-11-2005, 07:10 PM	#14
Steven B Senior Member Join Date: Jan 2000 Location: LHC, AZ Posts: 385	PM sent



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.