what's this thing worth? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

67ChevyC10Stepside · 03-23-2005, 12:32 PM

i was lied to about this.....and went all the way to NJ to get it....i dont know what these are worth so can you guys give me your honest opinion please? i still plan on buying another step bed and a short fleet bed as well....so im not sure what is going to happen with this one....i might sell it one day or something....this is NOT a for sale post i am just looking for some advice on this....

67ChevyC10Stepside · 03-23-2005, 12:33 PM

more

67ChevyC10Stepside · 03-23-2005, 12:34 PM

one more

kingsolver72 · 03-23-2005, 01:39 PM

I have no idea what its worth ,but I would not offer over $200 for it.JMO

arkracing · 03-23-2005, 04:19 PM

nicer than the one's that i have to work with.

I have 3 sets of fenders - 2 sets don't have mounting lips @ all and 1 set i might be able to save them

how bad is the area of the fender that bolts to the bedside and to the steps??
it's probably worth $200

Joe67 · 03-23-2005, 04:21 PM

Was that on ebay a few weeks back or so? I exchanged emails with a guy in NJ on a bed just like that.

What was wrong with it, how were you lied too??

I may need one

69 Short Fleet · 03-23-2005, 04:41 PM

Yep $200 is what I was thinking.

ZOOMY · 03-24-2005, 02:07 AM

Without seeing it in person it's real hard to tell, but if the fender mounting flanges are good, and the rust by the angle that's spot welded to the sides isn't serious, and it's not dented bad, It would go for $400-$500 in Wi. The non-spare tire drivers side fender adds about $100............Z

stllookn · 03-24-2005, 03:36 AM

I have seen worse...for sure. Thanks for posting since I had forgotten how to mount my step "L" brackets and your pictures reminded me just how they go! Seriously...THANKS! Good luck with it...I would repair it...mine was about that bad.

67ChevyC10Stepside · 03-24-2005, 01:06 PM

overall this thing aint that bad i dont think....but the guy in NJ said....there is no rot in this bed....even to the point i reached his house....he said there was no rot....

03-23-2005, 12:32 PM	#1
67ChevyC10Stepside Registered User Join Date: Mar 2004 Location: Butler PA Posts: 3,032	what's this thing worth? i was lied to about this.....and went all the way to NJ to get it....i dont know what these are worth so can you guys give me your honest opinion please? i still plan on buying another step bed and a short fleet bed as well....so im not sure what is going to happen with this one....i might sell it one day or something....this is NOT a for sale post i am just looking for some advice on this.... Attached Images __________________ 67 c-10, 400 SB, TH350, 4.10 gears, Blazer tank,camaro tach, sidemarker fuel fill (soon) WTB: stepside parts, 67 front end parts, 67 small window cab. posi for 3.73 or 4.10 for 12 bolt and 10 bolt.

03-23-2005, 12:33 PM	#2
67ChevyC10Stepside Registered User Join Date: Mar 2004 Location: Butler PA Posts: 3,032	more Attached Images __________________ 67 c-10, 400 SB, TH350, 4.10 gears, Blazer tank,camaro tach, sidemarker fuel fill (soon) WTB: stepside parts, 67 front end parts, 67 small window cab. posi for 3.73 or 4.10 for 12 bolt and 10 bolt.

03-23-2005, 12:34 PM	#3
67ChevyC10Stepside Registered User Join Date: Mar 2004 Location: Butler PA Posts: 3,032	one more Attached Images __________________ 67 c-10, 400 SB, TH350, 4.10 gears, Blazer tank,camaro tach, sidemarker fuel fill (soon) WTB: stepside parts, 67 front end parts, 67 small window cab. posi for 3.73 or 4.10 for 12 bolt and 10 bolt.

03-23-2005, 04:19 PM	#5
arkracing Weekend Warrior Join Date: Oct 2004 Location: CT Posts: 1,787	nicer than the one's that i have to work with. I have 3 sets of fenders - 2 sets don't have mounting lips @ all and 1 set i might be able to save them how bad is the area of the fender that bolts to the bedside and to the steps?? it's probably worth $200 __________________ -'07 GMC Sierra K2500HD -'66 C10 Suburban -'68/'71 K20 Service Bed Project -'69 Chevy C30 Mason Dump -'33Ford P/U 396ChevyPowered

03-23-2005, 04:21 PM	#6
Joe67 67 is sold Join Date: Apr 2001 Location: Troy, Michigan Posts: 6,733	Was that on ebay a few weeks back or so? I exchanged emails with a guy in NJ on a bed just like that. What was wrong with it, how were you lied too?? I may need one __________________ Joe - Formerly 67c10step ------------------------------- 1967 Chevy Stepside - ECE 4/6, fuelcell, 5lug - SOLD gr8lakes - My ebay auctions Click here to order forum apparel :: Click here to become a subscribing member

03-23-2005, 01:39 PM	#4
kingsolver72 10/30/19 Join Date: Aug 2004 Location: ottawa kansas Posts: 5,248	I have no idea what its worth ,but I would not offer over $200 for it.JMO

03-23-2005, 04:41 PM	#7
69 Short Fleet Registered User Join Date: Nov 2002 Location: Kelowna B.C. Canada Posts: 1,086	Yep $200 is what I was thinking.

03-24-2005, 02:07 AM	#8
ZOOMY Senior Member Join Date: Feb 2003 Location: WIS Posts: 1,752	step bed. Without seeing it in person it's real hard to tell, but if the fender mounting flanges are good, and the rust by the angle that's spot welded to the sides isn't serious, and it's not dented bad, It would go for $400-$500 in Wi. The non-spare tire drivers side fender adds about $100............Z

03-24-2005, 03:36 AM	#9
stllookn Saving 1 truck at a time! Join Date: Aug 2001 Location: Kent, WA Posts: 6,465	I have seen worse...for sure. Thanks for posting since I had forgotten how to mount my step "L" brackets and your pictures reminded me just how they go! Seriously...THANKS! Good luck with it...I would repair it...mine was about that bad. __________________ '68 C20 Longhorn 50th Anniversary 400/TH400 '68 C20 Longhorn 50th Anniversary 468/TH400w/buckets '72 C20 Halfhorn (Longhorn w/o cab and front clip) '69 Flxible Cruiser (look up ugly in the dictionary)

03-24-2005, 01:06 PM	#10
67ChevyC10Stepside Registered User Join Date: Mar 2004 Location: Butler PA Posts: 3,032	overall this thing aint that bad i dont think....but the guy in NJ said....there is no rot in this bed....even to the point i reached his house....he said there was no rot.... __________________ 67 c-10, 400 SB, TH350, 4.10 gears, Blazer tank,camaro tach, sidemarker fuel fill (soon) WTB: stepside parts, 67 front end parts, 67 small window cab. posi for 3.73 or 4.10 for 12 bolt and 10 bolt.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.