Low hump 71 cab -other stuff 4 sale-KS. - The 1947 - Present Chevrolet & GMC Truck Message Board Network

cadiac · 03-27-2005, 11:59 AM

I've stuffed the shop again buying a pile of stuff to get a couple parts for my truck. 71 cab-is---- "SOLD" ---- "1" 3/4 ton corporate rear end $75 "1" pair 3/4 trail arms/Nice $60 "1" disc brake 8 lug front suspension/clip or whole frame complete $50 "1" driver core support not to bad $15 "1" set of 4 15" 8 lug 10" WIDE wheels 2 with tires $50/all 4 "1" pair 69-72 fenders/L-R, not perfect/need a little work but not rotten $70 "1" left fender driver/fixer $15. "2" 69-72 hoods, not perfect/minor dings $20 per. - 69-70 grill shells [2-3?] for drivers/repairing $20 per. "1" GMC Perfect grill shell 68-72 $125 Have a complete 77 454 needs rebuilt $300 2 turbo 350's $50 per. "1" T375 core $50. "1" pair excellent dark green visors $30 In wichita, Kansas 316-773-2951 smbker@cox.net Don't be bashfull -Make Offers! Have trailer, can haul a little ways. Other stuff/small things coming.

1STtimePRo'71 · 03-27-2005, 12:53 PM

PM Sent.

cadiac · 03-27-2005, 10:33 PM

Pics up -More available.

kingsolver72 · 03-27-2005, 11:26 PM

I may be interested in the cab and maybe some other stuff.Scott

moodybo · 03-28-2005, 02:35 AM

I would be interested in the motor maybe! Give me more details please?

cadiac · 03-28-2005, 07:51 AM

Which engine? -Steve

Quote:

Originally Posted by moodybo

I would be interested in the motor maybe! Give me more details please?

**hilljob26** · 03-28-2005, 07:59 AM

hey man,just curious if you wanted to get rid of the slider in the back ground of the 2nd to last pic

rodstored-72 · 03-28-2005, 03:45 PM

i mght be interested in front fenders, i havea 72 that need them. are they non rusted & very minor damage?? let me know if wantt otalk..rodstored-72

cadiac · 03-28-2005, 06:28 PM

On the fenders "SEE Below" No rot -minor damage to work. The right one has a pin hole in the "pocket" on the inside. I had stripped these down and treated them with "Extend" -have been inside about 10 years.

cadiac · 03-28-2005, 09:36 PM

pics of fenders.

moodybo · 03-28-2005, 05:04 PM

The 70 350! you got any pics of it? block id code?

moodybo · 03-28-2005, 10:21 PM

I will take the 70 350 motor! Pm me
for details?

chuck call · 03-29-2005, 08:57 AM

Got any pics of the corporate rearend, I am looking for an eaton ,I quess is a corporate i am located in Springfield Mo. also what gear ratio? and how much to ship to 65613

cadiac · 03-29-2005, 06:52 PM

Quote:

Originally Posted by chuck call

Got any pics of the corporate rearend, I am looking for an eaton ,I quess is a corporate i am located in Springfield Mo. also what gear ratio? and how much to ship to 65613

I'm waiting for a guy to decide if he wants it, -if I don't hear from him soon you can have it. I don't know what ratio it is, -assumed a 4:10. a friend told me most are -some 4:56. Do you know where a code is to decipher on these housings? -Will post a pic later. Truck had a 350 and turbo 350 if that helps make a guess.

chuck call · 03-30-2005, 11:12 AM

Dont know where code is I couldnt find on mine either will do some more investigating and try to find out, what was the price? shipped to 65613

cadiac · 03-30-2005, 08:27 PM

I have a 70 truck shop manual, maybe I can find out in there. Price is $75 --PM sent--

Quote:

Originally Posted by chuck call

Dont know where code is I couldnt find on mine either will do some more investigating and try to find out, what was the price? shipped to 65613

cadiac · 04-02-2005, 01:40 AM

Lots of stuff still--

cadiac · 03-29-2005, 10:44 PM

Hers pics--

Quote:

Originally Posted by chuck call

Got any pics of the corporate rearend, I am looking for an eaton ,I quess is a corporate i am located in Springfield Mo. also what gear ratio? and how much to ship to 65613

**hilljob26** · 03-29-2005, 07:46 PM

can u post a pic of the one that are willing to get rid of,i would like a tinted one as well,but oh well,i would really like to find a tinted 3 panel instead of the 4 panel,but once agin,oh well

**hilljob26** · 03-30-2005, 07:13 PM

i will take both,i will try to make it up this weekend,but wont know till friday

cadiac · 03-30-2005, 08:22 PM

Ok -That'll work, -PM sent

Quote:

Originally Posted by hilljob26

i will take both,i will try to make it up this weekend,but wont know till friday

kingsolver72 · 04-02-2005, 06:02 PM

Hey Steve,I just wanted to thank you once more for delivering the cab,it was great to meet you.Thaddeus and I have already put doors on,the doors fit great.I am pretty stoked about this project.Scott

cadiac · 04-04-2005, 04:51 PM

bigarmzz -you out there?

Squid4life · 04-06-2005, 07:31 PM

Might need the core support, while I am looking at your seat belts.

Got pics, or should I just try to see if we can get together this week/weekend?

Squid

cadiac · 04-06-2005, 10:44 PM

Probably better to see in person, -"can" send pics. I'll be here all weekend. Most likely in the shop. Gave you my # didn't I? -Steve

03-27-2005, 11:59 AM	#1
cadiac Registered User Join Date: Jan 2004 Location: Wichita, Kansas 67212 Posts: 257	Low hump 71 cab -other stuff 4 sale-KS. I've stuffed the shop again buying a pile of stuff to get a couple parts for my truck. 71 cab-is---- "SOLD" ---- "1" 3/4 ton corporate rear end $75 "1" pair 3/4 trail arms/Nice $60 "1" disc brake 8 lug front suspension/clip or whole frame complete $50 "1" driver core support not to bad $15 "1" set of 4 15" 8 lug 10" WIDE wheels 2 with tires $50/all 4 "1" pair 69-72 fenders/L-R, not perfect/need a little work but not rotten $70 "1" left fender driver/fixer $15. "2" 69-72 hoods, not perfect/minor dings $20 per. - 69-70 grill shells [2-3?] for drivers/repairing $20 per. "1" GMC Perfect grill shell 68-72 $125 Have a complete 77 454 needs rebuilt $300 2 turbo 350's $50 per. "1" T375 core $50. "1" pair excellent dark green visors $30 In wichita, Kansas 316-773-2951 smbker@cox.net Don't be bashfull -Make Offers! Have trailer, can haul a little ways. Other stuff/small things coming. Last edited by cadiac; 04-06-2005 at 10:47 PM.

03-27-2005, 12:53 PM	#2
1STtimePRo'71 Registered User Join Date: Feb 2005 Location: Lake Crystal, MN Posts: 656	PM Sent. __________________ -Cory 1967 2 Wheel Chevy

03-28-2005, 07:59 AM	#7
hilljob26 Registered User Join Date: Dec 2004 Location: Gypsum Kansas 67448 Posts: 1,681	hey man,just curious if you wanted to get rid of the slider in the back ground of the 2nd to last pic __________________ 21 2500hd duramax 58 apache HILLJOB GRAPHIX--for all your graphic needs My build thread http://67-72chevytrucks.com/vboard/s...d.php?t=542497 LS ENGINE SWAP INFORMATION THREAD http://67-72chevytrucks.com/vboard/s...d.php?t=377348 4l60 to an NP205 http://67-72chevytrucks.com/vboard/s...43#post3697343

03-28-2005, 06:28 PM	#9
cadiac Registered User Join Date: Jan 2004 Location: Wichita, Kansas 67212 Posts: 257	On the fenders "SEE Below" No rot -minor damage to work. The right one has a pin hole in the "pocket" on the inside. I had stripped these down and treated them with "Extend" -have been inside about 10 years. Last edited by cadiac; 03-28-2005 at 09:40 PM.

03-28-2005, 09:36 PM	#10
cadiac Registered User Join Date: Jan 2004 Location: Wichita, Kansas 67212 Posts: 257	pics of fenders. Attached Images

03-27-2005, 10:33 PM	#3
cadiac Registered User Join Date: Jan 2004 Location: Wichita, Kansas 67212 Posts: 257	Pics up -More available.

03-27-2005, 11:26 PM	#4
kingsolver72 10/30/19 Join Date: Aug 2004 Location: ottawa kansas Posts: 5,218	I may be interested in the cab and maybe some other stuff.Scott

03-28-2005, 02:35 AM	#5
moodybo Registered User Join Date: Oct 2004 Location: Oklahoma Posts: 261	I would be interested in the motor maybe! Give me more details please?

03-28-2005, 03:45 PM	#8
rodstored-72 chevy truck fan Join Date: Mar 2005 Location: Gilbert, arizona 85298 Posts: 1,992	i mght be interested in front fenders, i havea 72 that need them. are they non rusted & very minor damage?? let me know if wantt otalk..rodstored-72

03-28-2005, 05:04 PM	#11
moodybo Registered User Join Date: Oct 2004 Location: Oklahoma Posts: 261	The 70 350! you got any pics of it? block id code?

03-28-2005, 10:21 PM	#12
moodybo Registered User Join Date: Oct 2004 Location: Oklahoma Posts: 261	I will take the 70 350 motor! Pm me for details?

03-29-2005, 08:57 AM	#13
chuck call Registered User Join Date: Mar 2005 Location: Missouri Posts: 16	Got any pics of the corporate rearend, I am looking for an eaton ,I quess is a corporate i am located in Springfield Mo. also what gear ratio? and how much to ship to 65613 Last edited by chuck call; 03-29-2005 at 10:43 AM.

03-30-2005, 11:12 AM	#15
chuck call Registered User Join Date: Mar 2005 Location: Missouri Posts: 16	Dont know where code is I couldnt find on mine either will do some more investigating and try to find out, what was the price? shipped to 65613

04-02-2005, 01:40 AM	#17
cadiac Registered User Join Date: Jan 2004 Location: Wichita, Kansas 67212 Posts: 257	Lots of stuff still--

03-29-2005, 07:46 PM	#19
hilljob26 Registered User Join Date: Dec 2004 Location: Gypsum Kansas 67448 Posts: 1,681	can u post a pic of the one that are willing to get rid of,i would like a tinted one as well,but oh well,i would really like to find a tinted 3 panel instead of the 4 panel,but once agin,oh well __________________ 21 2500hd duramax 58 apache HILLJOB GRAPHIX--for all your graphic needs My build thread http://67-72chevytrucks.com/vboard/s...d.php?t=542497 LS ENGINE SWAP INFORMATION THREAD http://67-72chevytrucks.com/vboard/s...d.php?t=377348 4l60 to an NP205 http://67-72chevytrucks.com/vboard/s...43#post3697343



Register or Log In To remove these advertisements.

03-30-2005, 07:13 PM	#20
hilljob26 Registered User Join Date: Dec 2004 Location: Gypsum Kansas 67448 Posts: 1,681	i will take both,i will try to make it up this weekend,but wont know till friday __________________ 21 2500hd duramax 58 apache HILLJOB GRAPHIX--for all your graphic needs My build thread http://67-72chevytrucks.com/vboard/s...d.php?t=542497 LS ENGINE SWAP INFORMATION THREAD http://67-72chevytrucks.com/vboard/s...d.php?t=377348 4l60 to an NP205 http://67-72chevytrucks.com/vboard/s...43#post3697343

04-02-2005, 06:02 PM	#22
kingsolver72 10/30/19 Join Date: Aug 2004 Location: ottawa kansas Posts: 5,218	Hey Steve,I just wanted to thank you once more for delivering the cab,it was great to meet you.Thaddeus and I have already put doors on,the doors fit great.I am pretty stoked about this project.Scott

04-04-2005, 04:51 PM	#23
cadiac Registered User Join Date: Jan 2004 Location: Wichita, Kansas 67212 Posts: 257	bigarmzz -you out there?

04-06-2005, 07:31 PM	#24
Squid4life Registered User Join Date: Mar 2005 Location: Wichita, Kansas Posts: 122	Might need the core support, while I am looking at your seat belts. Got pics, or should I just try to see if we can get together this week/weekend? Squid __________________ '69 C10 LWB- 305, Holley 2 barrel, 700R4, 4/5 drop, dark blue primer!, cheap driver project... Back on the road... In time to sell on Ebay.

04-06-2005, 10:44 PM	#25
cadiac Registered User Join Date: Jan 2004 Location: Wichita, Kansas 67212 Posts: 257	Probably better to see in person, -"can" send pics. I'll be here all weekend. Most likely in the shop. Gave you my # didn't I? -Steve Last edited by cadiac; 04-06-2005 at 10:45 PM.

Register or Log In To remove these advertisements.