Stereo/Speaker ideas ?

[teamharvey]

Hey guys,
I want to put in a CD/Radio player in either the glove box or the console. I want to keep it hidden to keep the original look as well as out of site. I also need some help on speakers as well ( location, types, ect. ). Anyone have any pics or thoughts on what you have done or seen ?

Thanks,
Bret

[JBstor]

I have seen lots of different ideas. kickpanel speakers, under dash speakers, under seat speakers, the dreaded in-door speakers, and of course, speakers in the back both boxed, and built into the side panels (not original panels for the love of pete!), There is a recent thread on the overhead headliner unit on the pickup board, but if you remove your top, it's gone. I have even seen speakers built out of light receptacles, and mounted on the roll bar, up when the top is off, and upside down when the top is on. The guy even had light covers for them in case it rained. I am considering all of these for mine (well, not the door speakers or the overhead)

For the radio, it depends on what you have. If it has a remote control, you can hide it almost anywhere. If not, I think the console is the way to go. I don't know if they still sell it, but Radio Shack used to have an under dash setup that you could hook up all your wiring to, and then hook up the other part to the stereo. Then you could simply slide it in when you wanted to use it and slide it out when you were done.

Personally, I will probably go with the console idea, Easy to wire, easy to reach, and easy to hide.

Anyone else?
JB

[jamesjones]

I'm putting the head unit in a Tuffy Console, already have holes in the doors so I'm putting the mids and highs there but if you didn't want to cut them you could have a custom kick panel built, for the lows I have 2 10's in seperate enclosures, I'll post some pictures later. You could probably have something similar made.

[blazerparts]

I put mine in the glove box............but had to put a small fan in to keep unit cool.

[FRENCHBLUE72]

Blazer parts welcome to the board.. My dash was already cut so i put a pioneer head unit in there along with 2'' pioneer kickpanel speaker's.. I got 2 xplod 6x9's mounted mid-way beteewn the door jamb and seat.. Right behind the seat I have 2 10'' xplod subs in a box sounds pretty good untill you take the top off... I would like to weld the dash stereo location back in someday and hide the head unit but thats down the road..

[jamie72]

i put an factory am in the dash and my cd in the consloe, 2, 10 inch subs in boxes in front of the wheel wells, and a 500 watt amp under the rear seat..

[audioholic]

Im a new member, can someone explain why door mounting is so frowned upon? I dont see alot of alternatives in these trucks. Im not going to put kickpanel mounted speakers in my offroad 4x4 that gets sand/dirt/mud on the floor regularly.

[71jimmy]

Originally Posted by audioholic

Im a new member, can someone explain why door mounting is so frowned upon? I dont see alot of alternatives in these trucks. Im not going to put kickpanel mounted speakers in my offroad 4x4 that gets sand/dirt/mud on the floor regularly.

It's a personal thing. Some of us want a stock vehicle when done, others like to do mods. What ever rings your bell, it's all good.

[audioholic]

Originally Posted by 71jimmy

It's a personal thing. Some of us want a stock vehicle when done, others like to do mods. What ever rings your bell, it's all good.

I certainly understand that, I would never cut one of my chevelles up for speakers. But like I said above, in an offroad vehicle, I dont see kicks working too well... what's the other alternatives to doors? Im quite ignorant to these trucks, still learning... what's the stock speaker size/location if I may ask?

[LUV2XCLR8]

Originally Posted by audioholic

what's the stock speaker size/location if I may ask?

DEPENDS ON HOW IT WAS ORDERED, SOME HAD A SINGLE CENTER DASH
SPEAKER, AND SOME HAD A SINGLE SPEAKER MOUNTED UNDER THE A/C
AND HEATER CONTROL PANEL, THE ONLY TWO OPTIONS I KNOW OF, BUT
I'M SPEAKING ABOUT A BLAZER, TRUCKS / BURBS COULD BE DIFFERENT

[bouncytruck]

Originally Posted by audioholic

I certainly understand that, I would never cut one of my chevelles up for speakers. But like I said above, in an offroad vehicle, I dont see kicks working too well... what's the other alternatives to doors? Im quite ignorant to these trucks, still learning... what's the stock speaker size/location if I may ask?

Many of these trucks are appreciating very rapidly. With less than 80,000 Blazer built between 1969 and 1972, a huge number have rusted away, been wrecked or extreme modifications, the value of the stock rigs, or reasonably close, is sky rocketing. Many people frown upon cutting into prime sheet metal. Being the owner of both a stock rig and a modified rig, I understand both sides and say, "do what you want."

If your purposes are to create an off road truck, I fully understand not wanting kick panel speakers. However, I don't think cutting into the bottoms of the doors would be too much better. You might consider putting speakers into the door panels to get them a little higher up. I've also thought about putting one of the Jeep roll bar speaker set ups in my '69 with some boxes built along the bed sides.

I've also seen some of the speaker set ups for wakeboard boats and thought those might be nice attached to the roll cage. They would be water proof and some of those put out great sound.

[Lemield]

Originally Posted by teamharvey

Hey guys,
I want to put in a CD/Radio player in either the glove box or the console. I want to keep it hidden to keep the original look as well as out of site. I also need some help on speakers as well ( location, types, ect. ). Anyone have any pics or thoughts on what you have done or seen ?

Thanks,
Bret

Bret,

PM me and I'll send you pics of my setup. I'd post it again but I don't want to waste bandwidth since I've posted it before. My pics are not of the greatest quality but the important things are shown.

My system is fully remote control and is all hidden. No cutting of the doors or dash was done.

Larry