![]() |
Register or Log In To remove these advertisements. |
|
|
![]() |
|
Thread Tools | Display Modes |
|
![]() |
#1 |
Registered User
Join Date: Jan 2005
Location: Chapin, SC
Posts: 392
|
![]()
How do you measure accurately the width of rally rims? In other words, if someone is selling 15x7 or 15x8 rims, how and where do you measure the width? I have found some 15x8 rims for example, I think...they measure 7 and 3/4 from lip to lip...is this a 15x8?? Help!
![]()
__________________
"Fighting for our freedoms....." |
![]() |
![]() |
![]() |
#2 |
laying low
![]() Join Date: Mar 2001
Location: Searcy, Ark. USA
Posts: 13,200
|
The correct way to measure rim width is "between" the rim lips where the tire seats against the lip, not outside to outside. Don't look for it to be exactly 7" or 8". A good many people measure the total width outside lip to outside lip and that's wrong.
__________________
Boog 69 Chevy stepside, 358/T350, 4.11 posi, 4.5/4 drop, rallys, poboy driver primer is finer 91 Chevy sportside, Tahoe, Yukon & GMC Crewcab All GM..'nuff said. I stand for the flag and kneel at the cross |
![]() |
![]() |
![]() |
#3 | |
Registered User
Join Date: Jan 2005
Location: Chapin, SC
Posts: 392
|
![]() Quote:
![]()
__________________
"Fighting for our freedoms....." |
|
![]() |
![]() |
![]() |
#4 |
laying low
![]() Join Date: Mar 2001
Location: Searcy, Ark. USA
Posts: 13,200
|
Inside the wheel lips. Right at 8". I just went out and measured my 7" truck ralleys. Right at 7" inside.
__________________
Boog 69 Chevy stepside, 358/T350, 4.11 posi, 4.5/4 drop, rallys, poboy driver primer is finer 91 Chevy sportside, Tahoe, Yukon & GMC Crewcab All GM..'nuff said. I stand for the flag and kneel at the cross |
![]() |
![]() |
![]() |
#5 |
Right turn Clyde
Join Date: Nov 2002
Location: Cincinnati, Ohio
Posts: 2,911
|
If it helps any they are stamped on the back inside the rim 15x8 or 15x7 whatever they are. If they gm truck rims that's what I have noticed about them.
__________________
1974 C25 LWB: 454 4bbl Carb / TH400 / 3.73 1992 Camaro RS 305 TBI |
![]() |
![]() |
![]() |
#6 |
Registered User
Join Date: Apr 2001
Location: DALLAS,TX
Posts: 21,963
|
When measuring a wheel w/a tire still on, typical factory wheel bead lips are .5" x 2 sides so subtract 1" from the outside lip-to-lip measurement for the width. If theres no tire on the rim you can just measure from bead lip to bead lip.
EX: Van ralleys measure 7.5" outside lip-to-lip. They are 6.5" wide.
__________________
67SWB-B.B.RetroRod 64SWB-Recycle 89CCDually-Driver/Tow Truck 99CCSWB Driver All Fleetsides @rattlecankustoms in IG Building a small, high rpm engine with the perfect bore, stroke and rod ratio is very impressive. It's like a highly skilled Morrocan sword fighter with a Damascus Steel Scimitar..... Cubic inches is like Indiana Jones with a cheap pistol. |
![]() |
![]() |
![]() |
Bookmarks |
|
|