E-brake help - The 1947 - Present Chevrolet & GMC Truck Message Board Network

teamharvey · 04-14-2005, 10:10 PM

I am in the middle of installing my e-brake system (PO did not have it operational) and was curious how the pedal comes back to it`s upright position when released. I assume it is spring loaded somehow but mine did not have one so I have no idea where to install or what size.

Thanks,
Bret

teamharvey · 04-15-2005, 07:56 PM

ttt

JimKshortstep4x4 · 04-15-2005, 08:34 PM

Here is a pic of the spring. It hooks to the end of the cable and to a 3/8" hole in the cross brace on the body.

Jim

**JIMs70GMC** · 04-15-2005, 08:18 PM

A large spring between the intermideate cable and a spot on the back of the cab, pulls the cable taught when disengaged and keeps it from hitting the tranny output or transfer case rear yoke in a 4wd.

intermideate cable runs from side to side along the frame rails.

teamharvey · 04-15-2005, 08:45 PM

Thanks Jim as always !

04-14-2005, 10:10 PM	#1
teamharvey Registered User Join Date: Jul 2004 Location: Turlock, Ca Posts: 578	E-brake help I am in the middle of installing my e-brake system (PO did not have it operational) and was curious how the pedal comes back to it`s upright position when released. I assume it is spring loaded somehow but mine did not have one so I have no idea where to install or what size. Thanks, Bret __________________ 71 Custom 20 Deluxe..soon to be SWB 1/2 ton 1 incredible wife 2 great kids

04-15-2005, 07:56 PM	#2
teamharvey Registered User Join Date: Jul 2004 Location: Turlock, Ca Posts: 578	ttt __________________ 71 Custom 20 Deluxe..soon to be SWB 1/2 ton 1 incredible wife 2 great kids

04-15-2005, 08:34 PM	#3
JimKshortstep4x4 Senior Member Join Date: Jul 2001 Location: Muskegon,MI,USA Posts: 6,026	Here is a pic of the spring. It hooks to the end of the cable and to a 3/8" hole in the cross brace on the body. Jim Attached Images

04-15-2005, 08:18 PM	#4
JIMs70GMC user # 2756 Join Date: Jun 2001 Location: Chesapeake, Virginia Posts: 4,612	A large spring between the intermideate cable and a spot on the back of the cab, pulls the cable taught when disengaged and keeps it from hitting the tranny output or transfer case rear yoke in a 4wd. intermideate cable runs from side to side along the frame rails. __________________ 1970 K25, 8' stepside bed 350/465/205 44 up front, 60 in the rear 4.10s rolling on 33" Dunlop MTs 1986 K5, 350/465/208 Dana 60/14 bolt from a cucv 36" Super Swampers TSL/SX 1983 K20 w/ CUCV axles, 350/700R4/208 sitting on 37" Goodyears 1986 M1031 6.2 diesel, TH400/NP205 locker in the rear and a LS in the front, all stock for now..... 1986 K30, 350/400/205 dana 60 and 14 bolt. I kept the drivetrain. Body/bad and chassis are gone. 1981 K30, 350/465/205 dana 60 and dually 14 bolt. Has a G80, and a flat bed. Going to replace the flat bed. 1985 K20, 350/400/208 10 bolt and SF 14 bolt. I wonder where I can find some 1 tons. Hmmmmm Last edited by JIMs70GMC; 04-15-2005 at 08:19 PM.

04-15-2005, 08:45 PM	#5
teamharvey Registered User Join Date: Jul 2004 Location: Turlock, Ca Posts: 578	Thanks Jim as always ! __________________ 71 Custom 20 Deluxe..soon to be SWB 1/2 ton 1 incredible wife 2 great kids



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.