How do take the windows out? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Nima · 04-19-2005, 09:44 PM

Hi everybody:
I need to take my windows out to replace the seals/felts but I can't remove the windows!. I have couple of books but unfortunately they are not any help. I would appreciate any tips especially the one with some kind of picture.
Thanks

*Randy70C-10* · 04-19-2005, 10:51 PM

The vent windows have to come out first. The window needs to be rolled all the way down to remove the vent window.

cableguy0 · 04-20-2005, 12:07 AM

yup what he^^^ said an extra set of hands is also very helpful. you can also get the window out by unbolting the window track on the back side side of the door. the screws are under where the door panel would be you can then get the window off the track slide ift back to disengage it from the regulator and spin the window 90 degrees and bring it out. neither way is any fun and be sure to have a second person on hand

Nima · 04-20-2005, 12:28 AM

Thanks for replies. Is there anyway to change the felts on the window rails without removing the window?

longnlow72 · 04-20-2005, 12:28 AM

mine was eays i didn it yesterday ill just give you the faq link http://67-72chevytrucks.com/vboard/s...d.php3?t=83475

cableguy0 · 04-20-2005, 12:30 AM

yea nima you can get them to slide in with the window in various postions and by pulling the door panel and unbolting the rear track to instal the long felt that runs from the wing around the top and down into the door

blazerparts · 04-20-2005, 10:35 AM

replaced mine w/o removing windows, no problem

chickenwing · 04-20-2005, 10:45 AM

Make sure you don't over torque the bolts on the install.

cdyblu · 04-21-2005, 04:34 PM

a big hammer will work too

Nima · 04-21-2005, 09:36 PM

Well, I replaced the felt on one side last night. It went ok, it took about 30-40 min, and now I expect the other side go smoother since I know what I am doing!. Thanks to all the tips. I am glad I didn't have to remove the windows.

04-19-2005, 09:44 PM	#1
Nima Blue 67 Join Date: Apr 2004 Location: Western WA Posts: 1,179	How do you take the windows out? Hi everybody: I need to take my windows out to replace the seals/felts but I can't remove the windows!. I have couple of books but unfortunately they are not any help. I would appreciate any tips especially the one with some kind of picture. Thanks Last edited by Nima; 04-19-2005 at 09:44 PM.

04-20-2005, 12:07 AM	#3
cableguy0 Senior Member Join Date: Apr 2000 Location: Delta,Pa Posts: 14,948	yup what he^^^ said an extra set of hands is also very helpful. you can also get the window out by unbolting the window track on the back side side of the door. the screws are under where the door panel would be you can then get the window off the track slide ift back to disengage it from the regulator and spin the window 90 degrees and bring it out. neither way is any fun and be sure to have a second person on hand __________________ Owner of North Point Car Care in Dundalk Md. We specialize in custom exhaust on both modern and classic vehicles. We are a full service auto shop from classics to modern vehicles. Feel free to contact me with questions. I will give a 10% discount to any board member.

04-20-2005, 12:28 AM	#5
longnlow72 Registered User Join Date: Aug 2004 Location: SW Washington Posts: 947	mine was eays i didn it yesterday ill just give you the faq link http://67-72chevytrucks.com/vboard/s...d.php3?t=83475 __________________ 72 Chevy lwb, cowl hood, shaved antenna, shaved bedrails, blazer tank, sidemarker fill, 1pc windows, flowmaster 40's, alpine deck, infinity 6x9's, infinity 4"ers, 2 jl audio 10w0's, grant wheel, keyless entry and alarm, more waiting to be done...

04-20-2005, 12:30 AM	#6
cableguy0 Senior Member Join Date: Apr 2000 Location: Delta,Pa Posts: 14,948	yea nima you can get them to slide in with the window in various postions and by pulling the door panel and unbolting the rear track to instal the long felt that runs from the wing around the top and down into the door __________________ Owner of North Point Car Care in Dundalk Md. We specialize in custom exhaust on both modern and classic vehicles. We are a full service auto shop from classics to modern vehicles. Feel free to contact me with questions. I will give a 10% discount to any board member.

04-20-2005, 10:35 AM	#7
blazerparts No,I DON'T have Tourett's Join Date: Mar 2005 Location: Reno, NV Posts: 556	replaced mine w/o removing windows, no problem __________________ '72 K5 CST 350/350 Daily Driver '69 GMC3500 Camper Special CST Flatbed 396/400 Upgraded to show truck '69 GMC 2500 L6292, 3spd beater

04-19-2005, 10:51 PM	#2
Randy70C-10 Account Suspended Join Date: Mar 2001 Location: Virginia Beach, Va. U.S.A. Posts: 15,320	The vent windows have to come out first. The window needs to be rolled all the way down to remove the vent window.

04-20-2005, 10:45 AM	#8
chickenwing Lovin' Life in Miss.! Join Date: Mar 2004 Location: Puckett, Mississippi Posts: 1,937	Make sure you don't over torque the bolts on the install. __________________ The truck... you hear that? No really, you did hear that?!!!

04-21-2005, 04:34 PM	#9
cdyblu Registered User Join Date: Dec 2004 Location: Green Bay, WI Posts: 44	a big hammer will work too

04-21-2005, 09:36 PM	#10
Nima Blue 67 Join Date: Apr 2004 Location: Western WA Posts: 1,179	Well, I replaced the felt on one side last night. It went ok, it took about 30-40 min, and now I expect the other side go smoother since I know what I am doing!. Thanks to all the tips. I am glad I didn't have to remove the windows.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.