Looked at 7 more tonight - The 1947 - Present Chevrolet & GMC Truck Message Board Network

teeitup · 04-26-2005, 11:38 PM

Thinking about buying them but can't decide, I still got 12 more to get from the other deal I got going.
In this mess is
67 1/2 2wd with a 6 cyl and PS
72 1/2 2wd
2 69 1/2 2wd, one has a van tilt in it
72 SWB 2wd frame but NO title
70 GMC 1 ton
68 chev 1 ton
I don't have enough room to buy them right now but I'm doing some thinking on them though. Don't seem to have enough time to do it all right now.

Thanks Randy

72 CustomCamper · 04-26-2005, 11:42 PM

Great day Randy. Leave a few trucks for other people to buy... LOL

Chuck

ZOOMY · 04-26-2005, 11:50 PM

Randy, Keep me in mind for a good '67 small window cab.........Zoomy

teeitup · 04-26-2005, 11:57 PM

Chuck, nobody else has even looked at these this guys has, he's had them advertised for 2 weeks, a few more won't hurt

, I think I have a good donor program going.

Dave, the 67 is good on the top side but has rust down low, corners, rockers, floor, under gas tank etc, it would be good for a top half though. I was thinking about you on it.
Thanks Randy

*bisquik65* · 04-28-2005, 09:22 PM

Quote:

Originally Posted by teeitup

Chuck, nobody else has even looked at these this guys has, he's had them advertised for 2 weeks, a few more won't hurt

, I think I have a good donor program going.

Dave, the 67 is good on the top side but has rust down low, corners, rockers, floor, under gas tank etc, it would be good for a top half though. I was thinking about you on it.
Thanks Randy

He is a great location,middle of all of us..Man take those trucks to cali and come back rich!!!!!

72 CustomCamper · 04-27-2005, 12:03 AM

I'm just pulling your chain a little. At least the trucks will live on as parts for other trucks rather than being crushed or rotting away...

Chuck

BLAZERMAN · 04-27-2005, 12:25 AM

Randy, keep me in mind if you run across a real nice GMC grille.

teeitup · 04-27-2005, 12:30 AM

I knew were you were messing with me Chuck

Rob, I will watch for one for you
Thanks Randy

oj70chevy · 04-27-2005, 11:48 AM

Hey Randy, keep me in mind for the PS setup off the 67 1/2 2wd with a 6 cyl if it will work with my 70 C/10 6cyl. And congrats on the red lettering.

*dtlilly* · 04-27-2005, 02:09 PM

Quote:

Originally Posted by teeitup

... Don't seem to have enough time to do it all right now.

Sounds like you need a partner. I'll do the dealing and running, you sell the parts

**hotrodmtodd** · 04-28-2005, 12:15 PM

Hey, I want to be Randys gopher! My yard already looks like yours maybe I could be your Eastern Warehouse? Would be alot more fun than runnin' a new parts store like I do now! I'll go in halves with you there Lambo. We could build a big complex right where 3-Rivers Stadium used to be! Later guys, Hot Rod

phlegm · 04-28-2005, 01:00 PM

Man, My wife would kill me for even thinking about it.

BTW if you run across a tool bag with the lug wrench and Jack handle I would be up for it. I dont have one... I just drive with my fingers crossed.

joelboxt · 04-28-2005, 04:08 PM

oj, what do the red letter mean?

joel

phlegm · 04-28-2005, 04:26 PM

Quote:

Originally Posted by joelboxt

oj, what do the red letter mean?

joel

The thread starter has graduated to vendor status.

teeitup · 04-28-2005, 09:10 PM

I bought these today, I'll be hauling one in tomorrow and one on Sat for starters. I need to find some room to store them for awhile now

*bisquik65* · 04-28-2005, 09:23 PM

Quote:

Originally Posted by teeitup

I bought these today, I'll be hauling one in tomorrow and one on Sat for starters. I need to find some room to store them for awhile now

You can store them at my house!!!If you leave them here for 30 days i get titles in the mail!!hehehe

Or you can put one at each hole at the golf course you work at and have a 67-72 hole green?

04-26-2005, 11:38 PM	#1
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Looked at 7 more tonight Thinking about buying them but can't decide, I still got 12 more to get from the other deal I got going. In this mess is 67 1/2 2wd with a 6 cyl and PS 72 1/2 2wd 2 69 1/2 2wd, one has a van tilt in it 72 SWB 2wd frame but NO title 70 GMC 1 ton 68 chev 1 ton I don't have enough room to buy them right now but I'm doing some thinking on them though. Don't seem to have enough time to do it all right now. Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

04-26-2005, 11:42 PM	#2
72 CustomCamper huh ??? Join Date: Nov 2002 Location: Fredericksburg,Va. Posts: 3,369	Great day Randy. Leave a few trucks for other people to buy... LOL Chuck __________________ 90 Blazer Silverado 350w/ 700R4 and 32" Kelly's "I am a bomb technician. If you see me running try to keep up!"

04-26-2005, 11:50 PM	#3
ZOOMY Senior Member Join Date: Feb 2003 Location: WIS Posts: 1,752	'67 cab Randy, Keep me in mind for a good '67 small window cab.........Zoomy

04-26-2005, 11:57 PM	#4
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Chuck, nobody else has even looked at these this guys has, he's had them advertised for 2 weeks, a few more won't hurt , I think I have a good donor program going. Dave, the 67 is good on the top side but has rust down low, corners, rockers, floor, under gas tank etc, it would be good for a top half though. I was thinking about you on it. Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

04-27-2005, 12:03 AM	#6
72 CustomCamper huh ??? Join Date: Nov 2002 Location: Fredericksburg,Va. Posts: 3,369	I'm just pulling your chain a little. At least the trucks will live on as parts for other trucks rather than being crushed or rotting away... Chuck __________________ 90 Blazer Silverado 350w/ 700R4 and 32" Kelly's "I am a bomb technician. If you see me running try to keep up!"

04-27-2005, 12:25 AM	#7
BLAZERMAN Currently Blazerless Join Date: Apr 2000 Location: St. Joseph Mo. Posts: 4,826	Randy, keep me in mind if you run across a real nice GMC grille. __________________ 1972 C/30 133" W.B. C&C 1970 GMC 3500 157" W.B. single wheel C&C

04-27-2005, 12:30 AM	#8
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	I knew were you were messing with me Chuck Rob, I will watch for one for you Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

04-27-2005, 11:48 AM	#9
oj70chevy 250 V-6 Club Join Date: Feb 2005 Location: San antonio, TX. Posts: 898	Hey Randy, keep me in mind for the PS setup off the 67 1/2 2wd with a 6 cyl if it will work with my 70 C/10 6cyl. And congrats on the red lettering. __________________ 1970 Chevy C/10 6 Cyl. 43k original miles all factory .http://67-72chevytrucks.com/vboard/s...d.php?t=197523 Never ask a stupid question unless you want a stupid answer .

04-28-2005, 12:15 PM	#11
hotrodmtodd 'Burban Legend Join Date: Apr 2005 Location: Mingo Junction OH Posts: 918	Randys Gopher Hey, I want to be Randys gopher! My yard already looks like yours maybe I could be your Eastern Warehouse? Would be alot more fun than runnin' a new parts store like I do now! I'll go in halves with you there Lambo. We could build a big complex right where 3-Rivers Stadium used to be! Later guys, Hot Rod

04-28-2005, 01:00 PM	#12
phlegm Still Green but learning Join Date: Nov 2004 Location: Central NC Posts: 1,895	Man, My wife would kill me for even thinking about it. BTW if you run across a tool bag with the lug wrench and Jack handle I would be up for it. I dont have one... I just drive with my fingers crossed. __________________ -- Cory 71 Cheyenne 10 - SWB, 350, "3 on the tree" AC cab 07 Suburban LTZ 4x4 2010 Acura TL 98 Mastercraft "FrankenStar" 225 27253 UPS/USPS IIOY....nope never was

04-28-2005, 04:08 PM	#13
joelboxt 71 Cheyenne SWB Fleetside Join Date: Jan 2005 Location: Sarnia, Ontario, Canada Posts: 403	oj, what do the red letter mean? joel __________________

04-28-2005, 09:10 PM	#15
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	I bought these today, I'll be hauling one in tomorrow and one on Sat for starters. I need to find some room to store them for awhile now __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.