![]() |
|
![]() |
#1 |
Getcha' Pull!!!
Join Date: Jun 2004
Location: Jim Thorpe, Pennsylvania
Posts: 215
|
![]()
I seem to be having a problem sizing wheels. I have the oppritunity to buy 5 Tailgunners 15x10 for 180 bucks. I asked the salesman if that would work on my 87 Blazer and he said that they wouldn't and that they would rub against the caliper. American Racing reccomends a 7 inch rim. Problem is I have 35 inch tires. And a 7 inch rim isn't kosher running 35's....NOW WHAT??? Is there any way that they would work? I just don't wasnt to pass up this good deal; but if I have to I guess I have to. I would appreciate anyones input/comments/suggesations on this matter. If it helps the tires are 35x12.50/15 yadda yadda yadda.
![]()
__________________
Rest In Peace Dime ![]() |
![]() |
![]() |
![]() |
#2 |
Parts and more parts
Join Date: Nov 2003
Location: Lebo, Kansas (middle of nowhere
Posts: 6,821
|
What is the back spacing on the rim. The width only matters if the backspacing is more that 4 1/2 ". The fender clearance will be your next problem with a wide rim.
|
![]() |
![]() |
![]() |
#3 |
Slots go on anything!
Join Date: May 2003
Location: Richardson, TX
Posts: 5,957
|
can you borrow one and see if they fit first? I don't recall 15x10's rubbing on anything, but I guess it would depend on the backspacing. How big of a lift are you running?
__________________
1974 Jimmy- 5.3/4L80e/NP241 |
![]() |
![]() |
![]() |
#4 |
Getcha' Pull!!!
Join Date: Jun 2004
Location: Jim Thorpe, Pennsylvania
Posts: 215
|
I have a 4" lift with 35 Cooper Discoverers on it now and have no rubbing at all. The Backspacing on the wheels. The backside of these wheels is 4 and the "offset" is -38. What the heck is offset?? Thanks again for all your input.
__________________
Rest In Peace Dime ![]() |
![]() |
![]() |
![]() |
#5 |
Registered User
Join Date: Feb 2005
Location: hawaii
Posts: 48
|
WELL i HAVE 15BY 10 ON MY TRUCK AND I HAVE NO PROBLEM WITH MINE AND TIRES i HAVE 295 50
|
![]() |
![]() |
![]() |
#6 |
Getcha' Pull!!!
Join Date: Jun 2004
Location: Jim Thorpe, Pennsylvania
Posts: 215
|
Well I just bought the American Racing Outlaw II's on eBay for 365 bucks shipped with lugs valve stems and center caps. 15x10 too!! Thanks again guys for your help!!!
![]()
__________________
Rest In Peace Dime ![]() |
![]() |
![]() |
![]() |
#7 |
Overcamber
Join Date: Mar 2005
Location: Skead ,Ontario
Posts: 109
|
I've got American Racing type 39's 15x 10's 295/50/15's all around with no problem on my 86 stepper 2wd...sticky wheel weights will get knocked off by the caliper on the fronts wheels if installed.
|
![]() |
![]() |
![]() |
#8 |
Getcha' Pull!!!
Join Date: Jun 2004
Location: Jim Thorpe, Pennsylvania
Posts: 215
|
I never thought of the weights getting thrown off by the caliper. That's a good point. I guess I'll just have to get the weights on the outside then. BTW nice truck!!
__________________
Rest In Peace Dime ![]() |
![]() |
![]() |
![]() |
Bookmarks |
|
|