EGR valve question - The 1947 - Present Chevrolet & GMC Truck Message Board Network

john_doe · 05-07-2005, 04:04 PM

I'm thinking about using a block off plate on the EGR opening but want to know how this will effect the running of the engine. Any thoughts would be great. It's a 1985 350 V8 in my 1971 GMC.

mocwon · 05-07-2005, 08:06 PM

Quote:

Originally Posted by john_doe

I'm thinking about using a block off plate on the EGR opening but want to know how this will effect the running of the engine. Any thoughts would be great. It's a 1985 350 V8 in my 1971 GMC.

Is it a tuned port injection motor and does the EGR valve has an electrical hook up wire coming from it? If there's no wire on the EGR valve you should be able to block it off without affecting the performance.

john_doe · 05-07-2005, 08:12 PM

There's no wire on the EGR so I'm going to block it off. Thanks for the input

05-07-2005, 04:04 PM	#1
john_doe Registered User Join Date: Sep 2004 Location: Western New York Posts: 37	EGR valve question I'm thinking about using a block off plate on the EGR opening but want to know how this will effect the running of the engine. Any thoughts would be great. It's a 1985 350 V8 in my 1971 GMC.

05-07-2005, 08:12 PM	#3
john_doe Registered User Join Date: Sep 2004 Location: Western New York Posts: 37	There's no wire on the EGR so I'm going to block it off. Thanks for the input



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.