WTB: Drag Link Part - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**402Bowtie** · 05-18-2005, 04:35 PM

I'm looking for the drag link that connects to the pitman arm. It measures 6.34" inches long. Does anyone have a new one they want to sell? It will go on a 1972 K20. Thanks....John

Tiresmokin · 05-18-2005, 05:19 PM

I'll check to see if mine is any good and post on here.

Tiresmokin · 05-18-2005, 09:05 PM

Guess my set up is different than yours. I have a centerlink attached to the pitman arm. Approx 34 inches long. Sorry

**402Bowtie** · 05-18-2005, 10:02 PM

no problem smokin...I'll keep looking

Is your's a 2wd?

Tiresmokin · 05-18-2005, 10:59 PM

Yes.

**402Bowtie** · 05-20-2005, 12:10 AM

This part is for a 4wd.
Rage'nrat: Here is the section I need. Here is a lousy pic showing a similar setup. It shows the steering sector and the three sections of the drag link. I only need the rear section that connects to the pitman arm. As mentioned earlier it measures 6.34 inches long. Thanks....John

Rod · 05-20-2005, 07:10 PM

It's all NOS GM. I belive those are large spinndle bearing one...like 73 up.

Numebers on the tie rod end boxes are 362297...those are correct for the 70 up steering. Could use those on the older ones too...I have the coupler NOS for those steering tie rod ends too.

362298 is the longer steering one.

Rod · 05-20-2005, 07:14 PM

Here's the tape measure pic beside the shorter one...I can't stand on my head and type though.

Rod · 05-20-2005, 07:17 PM

I have the bar that goes all the way across too..NOS and the tie rod ends NOS for that too.

Got NOS springs for inside the hubs ..gotta run the numbers on those yet..not sure if there for the big spicer hubs or newer ones.

Rod · 05-20-2005, 07:19 PM

I got odd stuff too.like 73 up NOS door hinges...NOS dimmer switches on floor...NOS wiper switch 73 up....bunch of stuff yet.

05-18-2005, 04:35 PM	#1
402Bowtie Registered User Join Date: Sep 2003 Location: Wichita, KS Posts: 3,734	WTB: Drag Link Part I'm looking for the drag link that connects to the pitman arm. It measures 6.34" inches long. Does anyone have a new one they want to sell? It will go on a 1972 K20. Thanks....John

05-20-2005, 12:10 AM	#6
402Bowtie Registered User Join Date: Sep 2003 Location: Wichita, KS Posts: 3,734	This part is for a 4wd. Rage'nrat: Here is the section I need. Here is a lousy pic showing a similar setup. It shows the steering sector and the three sections of the drag link. I only need the rear section that connects to the pitman arm. As mentioned earlier it measures 6.34 inches long. Thanks....John Attached Images Last edited by 402Bowtie; 05-20-2005 at 12:11 AM.

05-20-2005, 07:10 PM	#7
Rod Join Date: Dec 1999 Location: Eastern - Manitoba Canada, Winnipeg Posts: 4,369	It's all NOS GM. I belive those are large spinndle bearing one...like 73 up. Numebers on the tie rod end boxes are 362297...those are correct for the 70 up steering. Could use those on the older ones too...I have the coupler NOS for those steering tie rod ends too. 362298 is the longer steering one. __________________ Senior active founding member. 70 3/4 ton GMC Suburban 4x4 250/4 spd. 71 1/2 ton Suburban Chevy 4x4, 350/350 72 Chev 1 ton tow truck 402BB w/Holmes 440 wrecker on propane 2005 FLSTSCI Harley Springer 85 FXSB Harley Lowrider 72 Triumph 650 Bonneville 5spd "Poor people don't have hobbies" Quote from wife.

05-20-2005, 07:14 PM	#8
Rod Join Date: Dec 1999 Location: Eastern - Manitoba Canada, Winnipeg Posts: 4,369	Here's the tape measure pic beside the shorter one...I can't stand on my head and type though. Attached Images __________________ Senior active founding member. 70 3/4 ton GMC Suburban 4x4 250/4 spd. 71 1/2 ton Suburban Chevy 4x4, 350/350 72 Chev 1 ton tow truck 402BB w/Holmes 440 wrecker on propane 2005 FLSTSCI Harley Springer 85 FXSB Harley Lowrider 72 Triumph 650 Bonneville 5spd "Poor people don't have hobbies" Quote from wife.

05-20-2005, 07:17 PM	#9
Rod Join Date: Dec 1999 Location: Eastern - Manitoba Canada, Winnipeg Posts: 4,369	I have the bar that goes all the way across too..NOS and the tie rod ends NOS for that too. Got NOS springs for inside the hubs ..gotta run the numbers on those yet..not sure if there for the big spicer hubs or newer ones. __________________ Senior active founding member. 70 3/4 ton GMC Suburban 4x4 250/4 spd. 71 1/2 ton Suburban Chevy 4x4, 350/350 72 Chev 1 ton tow truck 402BB w/Holmes 440 wrecker on propane 2005 FLSTSCI Harley Springer 85 FXSB Harley Lowrider 72 Triumph 650 Bonneville 5spd "Poor people don't have hobbies" Quote from wife.

05-18-2005, 05:19 PM	#2
Tiresmokin Registered User Join Date: Apr 2005 Posts: 72	I'll check to see if mine is any good and post on here.

05-18-2005, 09:05 PM	#3
Tiresmokin Registered User Join Date: Apr 2005 Posts: 72	Guess my set up is different than yours. I have a centerlink attached to the pitman arm. Approx 34 inches long. Sorry

05-18-2005, 10:02 PM	#4
402Bowtie Registered User Join Date: Sep 2003 Location: Wichita, KS Posts: 3,734	no problem smokin...I'll keep looking Is your's a 2wd?

05-18-2005, 10:59 PM	#5
Tiresmokin Registered User Join Date: Apr 2005 Posts: 72	Yes.

05-20-2005, 07:19 PM	#10
Rod Join Date: Dec 1999 Location: Eastern - Manitoba Canada, Winnipeg Posts: 4,369	I got odd stuff too.like 73 up NOS door hinges...NOS dimmer switches on floor...NOS wiper switch 73 up....bunch of stuff yet. __________________ Senior active founding member. 70 3/4 ton GMC Suburban 4x4 250/4 spd. 71 1/2 ton Suburban Chevy 4x4, 350/350 72 Chev 1 ton tow truck 402BB w/Holmes 440 wrecker on propane 2005 FLSTSCI Harley Springer 85 FXSB Harley Lowrider 72 Triumph 650 Bonneville 5spd "Poor people don't have hobbies" Quote from wife.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.