F/s Detroit Locker For Eaton Ho72 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

drink2mny · 06-09-2005, 01:30 PM

Sold!

nu2-72 · 06-10-2005, 02:50 PM

I do not know the difference between HO 52 and 72. Can you help me here? What do I have and how do I know or does it matter?

Thanks and pardon my ignorance.

drink2mny · 06-10-2005, 03:21 PM

i'm heading out of town till sunday night,but feel free to email
blackbirdscuston@aol.com. I don't know personally about the difference

it might be sold locally by the end of the weekend, so please if ya need it get a hold of Randy at that email or Call Blackbirds at 509-534-5219..

Hope we can help you out..

**JIMs70GMC** · 06-10-2005, 05:44 PM

size of the brakes and the H072 has a pinion load bolt. gears/carriers/axles all the same.

nu2-72 · 06-10-2005, 10:06 PM

So this should be a bolt in Jim?

72 Cheyenne K20 · 06-11-2005, 01:37 AM

Drink2mny - please put me in line for the locker, do you know what the gear ratio is?

Hey Jim, on the question of the HO52 and HO72. I had a 70' 3/4 ton 4x4 with rear brake drum that was 11"x2" and my 72' 3/4 ton 4x4 has rear brake drum 11"x3". I would assume that the HO72 rear is the one with the larger brakes?

Thanks, Scott

**special-K** · 06-11-2005, 08:04 AM

The brakes got changed around some on the same axle.At least on the HO52.The `71 K/20 I had used shoes/drums that were `71 only,taller and skinnier(12x2?).Sounds like it`ll work on an HO52 if the carrier,axles,and gears are the same.Not sure,though.C`mon back Jim,enlighten us.

nu2-72 · 06-11-2005, 10:01 AM

I appologize for the delay here guys but I am just not knowlegable enough to know if this is the right one for me.
This is one of those cases where I will not jump on an item for sale without a little more info and unfortunately, I do not know and the seller does not know either. Nobodys fault, just not informed as I would like. I am still learning.
Does this include gears and what ratio?
And I know it is now Saturday but are you able to get a pic for us. I know you are to be gone.
Can anyone else help here?
Perhaps a full description of each axle, side by side comparison would be very helpful. Maybe something for the FAQ?

**special-K** · 06-11-2005, 03:37 PM

Jim`s at a cookout.I`ve seen him answer alot of questions on these HOs.I bet we`ll have some answers tonight.Looks like you got first dibs.I just want to learn something.

**JIMs70GMC** · 06-11-2005, 07:40 PM

I got the info out of my 1970 chassis manual. The carriers are the same. it's kinda like a 14 bolt in a 3/4 ton and 1 ton. Same axle different brakes.

**special-K** · 06-11-2005, 10:13 PM

Yeah,I posted this question on the drivetrain board and got a similar reply.According to the 1967 manual the differences are gear ratios and brakes.

nu2-72 · 06-12-2005, 12:12 PM

Drink2mny, I have tried to email but the link must be mis-spelled. Looks like the (n) should be an (m) for custom. I will try again by changing the spelling. Sent the email yesterday and just got the failure notice today.

drink2mny · 06-13-2005, 12:38 AM

Well I just, just got back from a kick ass car show,(i'll post on other board)..

I replyed in a hurry the other day, I was on my way out the door..reason for the mispelled email addy..
I should have said check sig to email...

I was told Randy has emailed you back.
It is an ho52 rear, as for gears and ratio.. The locker goes into the carrier, so it will work with what ever ratio you have.. It takes the place of the spider gears, not the whole carrier..

I'll try to get to the shop monday to get a pic..

**special-K** · 06-13-2005, 07:09 AM

If nu2-72 doesn`t take it(doubt it),I will.I was just helpin`and learnin`at first.But,what the hay.

nu2-72 · 06-13-2005, 02:32 PM

I did some more research and it looks like it should do the trick.
Go ahead and send pics please but at this point, I will take it.
Stupid me, khanson@ccp.com or khanson@vp.com
Both will ensure that I get it.

drink2mny · 06-14-2005, 12:44 AM

Here ya go...

The bolt going through is just there to hold it together..

drink2mny · 06-14-2005, 12:47 AM

Just go here
http://www.blackbirdscustomtrucks.com/index14.html

and scroll down to custom parts and gears if you would like to pay by paypal through our site..
..
If not let me know. I will take money orders also..
I'll pm you my addy...

06-09-2005, 01:30 PM	#1
drink2mny Registered User Join Date: Jun 2003 Location: spokane wa Posts: 2,189	F/s Detroit Locker For Eaton Ho72 Sold! __________________ Support The Board Last edited by drink2mny; 06-17-2005 at 09:00 PM.

06-10-2005, 02:50 PM	#2
nu2-72 Senior Member Join Date: Apr 2001 Location: Amazonia, Mo. USA Posts: 2,821	I do not know the difference between HO 52 and 72. Can you help me here? What do I have and how do I know or does it matter? Thanks and pardon my ignorance. __________________ 72 3/4 4x4 350 4spd 72 3/4 4x4 350 auto 2004 Duramax Silverado 4x4 2006 Duramax Crew cab 4x4 2010 Harley Ultra Limited 2011 Harley Street Glide

06-10-2005, 03:21 PM	#3
drink2mny Registered User Join Date: Jun 2003 Location: spokane wa Posts: 2,189	i'm heading out of town till sunday night,but feel free to email blackbirdscuston@aol.com. I don't know personally about the difference it might be sold locally by the end of the weekend, so please if ya need it get a hold of Randy at that email or Call Blackbirds at 509-534-5219.. Hope we can help you out.. __________________ Support The Board

06-10-2005, 05:44 PM	#4
JIMs70GMC user # 2756 Join Date: Jun 2001 Location: Chesapeake, Virginia Posts: 4,612	size of the brakes and the H072 has a pinion load bolt. gears/carriers/axles all the same. __________________ 1970 K25, 8' stepside bed 350/465/205 44 up front, 60 in the rear 4.10s rolling on 33" Dunlop MTs 1986 K5, 350/465/208 Dana 60/14 bolt from a cucv 36" Super Swampers TSL/SX 1983 K20 w/ CUCV axles, 350/700R4/208 sitting on 37" Goodyears 1986 M1031 6.2 diesel, TH400/NP205 locker in the rear and a LS in the front, all stock for now..... 1986 K30, 350/400/205 dana 60 and 14 bolt. I kept the drivetrain. Body/bad and chassis are gone. 1981 K30, 350/465/205 dana 60 and dually 14 bolt. Has a G80, and a flat bed. Going to replace the flat bed. 1985 K20, 350/400/208 10 bolt and SF 14 bolt. I wonder where I can find some 1 tons. Hmmmmm

06-10-2005, 10:06 PM	#5
nu2-72 Senior Member Join Date: Apr 2001 Location: Amazonia, Mo. USA Posts: 2,821	So this should be a bolt in Jim? __________________ 72 3/4 4x4 350 4spd 72 3/4 4x4 350 auto 2004 Duramax Silverado 4x4 2006 Duramax Crew cab 4x4 2010 Harley Ultra Limited 2011 Harley Street Glide

06-11-2005, 01:37 AM	#6
72 Cheyenne K20 Registered User Join Date: Feb 2003 Location: Staunton, Virginia Posts: 554	Drink2mny - please put me in line for the locker, do you know what the gear ratio is? Hey Jim, on the question of the HO52 and HO72. I had a 70' 3/4 ton 4x4 with rear brake drum that was 11"x2" and my 72' 3/4 ton 4x4 has rear brake drum 11"x3". I would assume that the HO72 rear is the one with the larger brakes? Thanks, Scott

06-11-2005, 08:04 AM	#7
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,851	The brakes got changed around some on the same axle.At least on the HO52.The `71 K/20 I had used shoes/drums that were `71 only,taller and skinnier(12x2?).Sounds like it`ll work on an HO52 if the carrier,axles,and gears are the same.Not sure,though.C`mon back Jim,enlighten us. __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

06-11-2005, 10:01 AM	#8
nu2-72 Senior Member Join Date: Apr 2001 Location: Amazonia, Mo. USA Posts: 2,821	I appologize for the delay here guys but I am just not knowlegable enough to know if this is the right one for me. This is one of those cases where I will not jump on an item for sale without a little more info and unfortunately, I do not know and the seller does not know either. Nobodys fault, just not informed as I would like. I am still learning. Does this include gears and what ratio? And I know it is now Saturday but are you able to get a pic for us. I know you are to be gone. Can anyone else help here? Perhaps a full description of each axle, side by side comparison would be very helpful. Maybe something for the FAQ? __________________ 72 3/4 4x4 350 4spd 72 3/4 4x4 350 auto 2004 Duramax Silverado 4x4 2006 Duramax Crew cab 4x4 2010 Harley Ultra Limited 2011 Harley Street Glide

06-11-2005, 03:37 PM	#9
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,851	Jim`s at a cookout.I`ve seen him answer alot of questions on these HOs.I bet we`ll have some answers tonight.Looks like you got first dibs.I just want to learn something. __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

06-11-2005, 07:40 PM	#10
JIMs70GMC user # 2756 Join Date: Jun 2001 Location: Chesapeake, Virginia Posts: 4,612	I got the info out of my 1970 chassis manual. The carriers are the same. it's kinda like a 14 bolt in a 3/4 ton and 1 ton. Same axle different brakes. __________________ 1970 K25, 8' stepside bed 350/465/205 44 up front, 60 in the rear 4.10s rolling on 33" Dunlop MTs 1986 K5, 350/465/208 Dana 60/14 bolt from a cucv 36" Super Swampers TSL/SX 1983 K20 w/ CUCV axles, 350/700R4/208 sitting on 37" Goodyears 1986 M1031 6.2 diesel, TH400/NP205 locker in the rear and a LS in the front, all stock for now..... 1986 K30, 350/400/205 dana 60 and 14 bolt. I kept the drivetrain. Body/bad and chassis are gone. 1981 K30, 350/465/205 dana 60 and dually 14 bolt. Has a G80, and a flat bed. Going to replace the flat bed. 1985 K20, 350/400/208 10 bolt and SF 14 bolt. I wonder where I can find some 1 tons. Hmmmmm

06-11-2005, 10:13 PM	#11
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,851	Yeah,I posted this question on the drivetrain board and got a similar reply.According to the 1967 manual the differences are gear ratios and brakes. __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

06-12-2005, 12:12 PM	#12
nu2-72 Senior Member Join Date: Apr 2001 Location: Amazonia, Mo. USA Posts: 2,821	Drink2mny, I have tried to email but the link must be mis-spelled. Looks like the (n) should be an (m) for custom. I will try again by changing the spelling. Sent the email yesterday and just got the failure notice today. __________________ 72 3/4 4x4 350 4spd 72 3/4 4x4 350 auto 2004 Duramax Silverado 4x4 2006 Duramax Crew cab 4x4 2010 Harley Ultra Limited 2011 Harley Street Glide

06-13-2005, 12:38 AM	#13
drink2mny Registered User Join Date: Jun 2003 Location: spokane wa Posts: 2,189	Well I just, just got back from a kick ass car show,(i'll post on other board).. I replyed in a hurry the other day, I was on my way out the door..reason for the mispelled email addy.. I should have said check sig to email... I was told Randy has emailed you back. It is an ho52 rear, as for gears and ratio.. The locker goes into the carrier, so it will work with what ever ratio you have.. It takes the place of the spider gears, not the whole carrier.. I'll try to get to the shop monday to get a pic.. __________________ Support The Board

06-13-2005, 07:09 AM	#14
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,851	If nu2-72 doesn`t take it(doubt it),I will.I was just helpin`and learnin`at first.But,what the hay. __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

06-13-2005, 02:32 PM	#15
nu2-72 Senior Member Join Date: Apr 2001 Location: Amazonia, Mo. USA Posts: 2,821	I did some more research and it looks like it should do the trick. Go ahead and send pics please but at this point, I will take it. Stupid me, khanson@ccp.com or khanson@vp.com Both will ensure that I get it. __________________ 72 3/4 4x4 350 4spd 72 3/4 4x4 350 auto 2004 Duramax Silverado 4x4 2006 Duramax Crew cab 4x4 2010 Harley Ultra Limited 2011 Harley Street Glide Last edited by nu2-72; 06-13-2005 at 02:34 PM.



Register or Log In To remove these advertisements.

06-14-2005, 12:44 AM	#16
drink2mny Registered User Join Date: Jun 2003 Location: spokane wa Posts: 2,189	Here ya go... The bolt going through is just there to hold it together.. Attached Images __________________ Support The Board

06-14-2005, 12:47 AM	#17
drink2mny Registered User Join Date: Jun 2003 Location: spokane wa Posts: 2,189	Just go here http://www.blackbirdscustomtrucks.com/index14.html and scroll down to custom parts and gears if you would like to pay by paypal through our site.. .. If not let me know. I will take money orders also.. I'll pm you my addy... __________________ Support The Board

Register or Log In To remove these advertisements.