![]() |
|
![]() |
#1 |
Senior Member
![]() Join Date: Feb 2001
Location: Killen, Alabama USA
Posts: 3,574
|
Dwell setting???
What's the best way to set the dwell in the points when you don't have a dwell meter? Can you adjust it while its running and listen for anything? Thanks for any help.
Joshua |
![]() |
![]() |
![]() |
#2 |
Senior Member
Join Date: Apr 2005
Location: Joppa, Maryland
Posts: 4,408
|
Years ago, and I mean many years ago, I used to adjust the point gap with a piece of matchbook cover. That was before I was able to buy a dwell meter. That always worked for me.
__________________
1997 GMC Sierra Ext 1965 Mustang |
![]() |
![]() |
![]() |
#3 |
Senior Member
Join Date: Jan 2003
Location: daytonabeach
Posts: 22,956
|
with the cap off bump the motor over to get it so the points ramp is on the highest point ov the dizzy cam and use a feeler gauge to set the points at .019" if they're new p[oints or .016"gap if the points are used
__________________
71c-10 350/2004r/4:11 lowered3/4 longbed/dead by hurricane MEANING OF DEATH::::: SOMEBODY ELSE GETS YOUR STUFF DONT BELIEVE EVERYTHING YOU THINK TAKE MY ADVISE;I DON'T USE IT ANYWAY |
![]() |
![]() |
![]() |
#4 | |
Out draggin'
Join Date: Jan 2004
Location: Pitman,NJ
Posts: 1,574
|
Quote:
Exactly... The matchbook method works in a pinch too ![]()
__________________
91 GMC Xcab LB-Bags/bd/caddy clip SOLD 72 C10 Cheyenne Super LWB SOLD 92 GMC K1500 Burb 72 C10 Burb (ex. Cheesewagon)SOLD 72 C20 Burb parts truck 71 C10 Burb "project" |
|
![]() |
![]() |
![]() |
#5 |
Saving 1 truck at a time!
Join Date: Aug 2001
Location: Kent, WA
Posts: 6,465
|
Don't forget to reset your timing after setting the dwell since it affects the timing. I know you probably already know this but just thought I would mention it.
__________________
'68 C20 Longhorn 50th Anniversary 400/TH400 '68 C20 Longhorn 50th Anniversary 468/TH400w/buckets '72 C20 Halfhorn (Longhorn w/o cab and front clip) '69 Flxible Cruiser (look up ugly in the dictionary) |
![]() |
![]() |
![]() |
#6 | |
Registered User
![]() Join Date: Apr 2004
Location: The Other Maine!
Posts: 2,236
|
![]() Quote:
![]()
__________________
1968 Chevy 4x4 307 4 speed |
|
![]() |
![]() |
![]() |
#7 | |
Registered User
Join Date: Jun 2005
Location: Sacramento CA
Posts: 1,255
|
Quote:
__________________
Got bored, sold everthing. Got bored, looking for a 1960-66 C-10. Want to build my last truck. |
|
![]() |
![]() |
![]() |
#8 | |
member #16
![]() Join Date: Dec 1999
Location: Yuba City Ca.
Posts: 3,618
|
Quote:
Another method that has been around for years, is to adjust while running you turn the adj. screw in until it starts to misfire and then back it out 1/2 turn. You can check with dwell meter and it will be about 30 degrees dwell. John
__________________
john http://67-72chevytrucks.com/vboard/showgroups.php board vendors ![]() http://www.flickr.com/photos/1745471...7602865984234/ |
|
![]() |
![]() |
![]() |
Bookmarks |
|
|