Making my '90 'burb power everything....

[chevy_fatman]

Need a little advice and opinions regarding my 'burb.

I have a 4x4 1990 suburban, but unfurtunately it doesn't have power windows nor power locks and the little lady doesn't want drive it since "the window crank is too hard to turn" Now, What would it be easier? put Power windows regulators and Power Doorlocks in my current doors? or just get different doors with original power accesories? How about the wiring? do I need a different harness or something? or are all the 'burbs already prewired to add accesories like these from the factory?

Thank you Guys. Paul.

[screwballl]

from what i have heard it is easier to get doors witht hem in it but it might be better to hear from someone that has actually done it before....

[u2slow]

I'm sure the little lady will enjoy power windows and locks that jam, blow fuses, and only work part-time much better

Nevermind that damn power tailgate that you have to pound with your fist six times (in the right places), do a dance, lean on the gate, while turning the key, and helping the glass slide up/down.

Now, What would it be easier?

Grease your window tracks and tell the little lady how lucky she is to have you and that wonderful Suburban.

[tommy knotts]

fat man ,you are coming down after the 700r4 from me,i have a burb with power every thing,can fix you up with parts

[chevy_fatman]

Originally Posted by u2slow

I'm sure the little lady will enjoy power windows and locks that jam, blow fuses, and only work part-time much better

Nevermind that damn power tailgate that you have to pound with your fist six times (in the right places), do a dance, lean on the gate, while turning the key, and helping the glass slide up/down.

My ' burb has a tailgate! and that window switch only works going down, I have that tailgate cover out so I can use a screwdriver to make that window go up
Were all that suburbans plagued with the locks jamming and blowing fuses form the factory? Will I need a different harness to plug different doors in?

Tommy, what all do you have? I'm coming down next weekend.

Thanks for the replies guys, anyone else?

[tommy knotts]

have complete front doors with pw,pdl in decent cond.have rear doors missing glass,but has regulators,motors,switches and wiring. doors are still on burb.will take $100 for the 4 doors,rear gate motor/regulator and any related wiring you want to pull

[chevy_fatman]

Originally Posted by tommy knotts

have complete front doors with pw,pdl in decent cond.have rear doors missing glass,but has regulators,motors,switches and wiring. doors are still on burb.will take $100 for the 4 doors,rear gate motor/regulator and any related wiring you want to pull

Oh boy, can't wait to get down there Tommy, I'll most likely have my S-10 full of parts on the way back, save those doors for me. Thanks Tommy.


Now if somebody could give a few pointers in all or whatever wiring I'll need of the donor vehicle to swap to mine.

[aggiedave98]

I have a '89 burb w/ all power. locks are fine. windows are gummed up and they go down really slow... sometimes stopping completely and overheating the motor. be careful the new ones are ok...

[special-K]

My parts Sub has the full-power harness.But,the wires were cut to get the front doors off.I don`t know if this helps,but you can pull it for free.